Syfte ? Syftet med denna studie är att undersöka hur lagerstyrning av reservdelar inom hjälpmedelsförsörjning kan effektiviseras.Metod och genomförande ? Den valda strategin för att uppfylla studiens syfte omfattades av att genomföra en fallstudie i samarbete med Hjälpmedelscentralen på Länssjukhuset Ryhov i Jönköping. Empiri från fallstudien har erhållits genom intervjuer och dokumentationsstudier. Insamlad data har analyserats gentemot det teoretiska ramverket och därmed genererat studiens resultat.Resultat ? Studiens resultat visar inledningsvis på att rörlighet, volymvärde och kritiskhet är viktiga aspekter att beakta vid lagerstyrning av reservdelar inom hjälpmedelsförsörjning.

This report describes how wavefiles can be recorded with programs written in the C++ language . The report also describes how the recorded sound is handled before it can be analyzed. The report describes the different parts that make a wave file to a wave file and how Windows handle these files. There is always some silence or noise of unknown length that passes through the system before some interesting sound arrives. That silence or nose must not be recorded and therefore some function must be developed that can detect interesting sound or speech.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling Spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling Spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling Spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The information technology development that has occurred over the past decade has broughtmajor changes into people?s lives. We have gotten used to being constantly connected to theInternet and always having access to information through mobile technology. This has led tochanges in education and more and more courses have become available through Internet. Theseweb-based educations are nowadays very common in schools and in the business world as theyprovide increased flexibility for the user.Habiliteringen Lundbystrand has seen the potential in this kind of education and believes this isan opportunity for them to rationalize their work by replacing parts of their education for parentswith a web-based education.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling Spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This essay shows how administrators in two different organizations are experiencing freedom of action in their work situation. The essay is made based on a qualitative method and interviews were used to implement the study. People chosen for this study are four administrators at a governmentagency - the Social Insurance agency, and four municipal officers from different Social service offices in southern Sweden. The theoretical framework consists of Weber's theory of bureaucracy, and his discussion of the legal authority. The analysis is designed as adiscussion of the parts that were especially prominent during the interviews.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Problem: How is Lean, a production-focused model being applied to non-productive focused industries.Purpose: To examine how Lean has been applied to the department of Turbuhaler-Kvalitetskontroll and which parts have been successfully applied.Problem statement: How does the implementation of Lean?s basic concept, which originated in the car industry, differentiate itself from the implementation of Lean in the pharmaceutical industry, in this case the department of Turbuhaler-Kvalitetskontroll at AstraZeneca.Conclusions: The department has had success in its implementation of lean. They have developed and modified the basic concept in order to apply it and excluded the parts they did not consider necessary. Through their work they have accomplished numerous improvements in, among other things, the reduction of lead time. .

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

This Bachelor?s thesis consists of two parts; one with prefabrication (prefab) in focus and thesecond part includes detail design of a house project. These parts are linked together by designingsome parts of the house project as prefabricated.The focus section investigates how prefabrication can act time-, costs- and environmentallyeffective to a building project. This is investigated by combining literary sources with sourcesbased on reality in the shape of interviews. The result of the investigation is that prefabcould acteffectively on previously mentioned factors,if this way of building is used in a proper way.The detail design of the house started in a residential area with a new local plan in Huddinge,named Sjöängen II.

The purpose of this thesis is to gain insight into children`s voluntary reading in their spare time. I have focused on printed books and none of the digitally published Medias. I want to examine how children experience the power adult`s exercise over their chose of books and also why they choose the books they do. The method of this study is qualitative with interviews of six 10 years old children. I conducted the interviews detachedly and I have used two different point of view for my study; Aidan Chamber`s ?Reading Circle? and Barbro Johanssons opinions if children`s participation in terms of their voluntarily book selection.I have also studied other researchers and author´s writings about literacy, children´s reading habits, adults´ attitudes to children´s reading and children´s passion for reading.During my study it became clear that children who like to read prefer to read detective stories for children, a result that also earlier investigations reached..