The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.

The essay describes the bachelor project by Marie Hanås, in collaboration with Skälsö Arkitekter. Skälsö Arkitekter are currently developing an area in the north of Gotland, Bungenäs; previously home to lime stone quarries and military bases.The brief was to design a set of outdoor furniture to complement the new development. The main effort of the project was in designing furniture that would fit the environment visually but construction issues were a major secondary concern, to ensure the easiest possible manufacturing. A reference group of coastal house owners were interviewed, and their feedback, together with an analysis of functions, trends and target groups, were the base for the ideas.Of the five concepts presented, Skälsö Arkitekter chose one to develop further. This was done through sketches, models and 3D models and led to the final result which is lightweight furniture of Gotlandic pine wood with an industrial touch.

Abstract The purpose of this essay is to find difficulties and risks in the re-engineering process when restructuring to Model-View-Controller (MVC). A thoroughly theory study has been conducted to be able to understand the important steps in the re-engineering process. The methods and concepts of this essay are re-engineering, UML, system development life cycle, design patterns and MVC. The science approach used is design science where the artifact being developed are a set of models.In the analysis phase of the process the system is analyzed. The result of the analysis is notes of difficulties found and models showing the structure of the system.

The purpose of this paper is to examine how propaganda has been used by two dictatorships, namely Nazi Germany and the Soviet Union under the leadership of Josef Stalin. By examining a number of propaganda posters and paintings, we aim to find similarities as well as differences in how the two nations attempted to create imagined communities amongst their people. While conducting this examination of the propaganda material, we have acquired and used some of the ideas of Benedict Anderson, who has coined a concept that he calls ?Imagined Communities?. In conclusion, it is established that the most obvious similarity is that both leaders are heavily included in their propaganda material, both pictured and mentioned in text.

Deciduous forests are, according to the National Environmental Quality Objectives, a priority area. Deciduous forests are rich in species and the occurrence of dead wood is an important factor for biodiversity. In order to identify valuable deciduous forests for bio-diversity, conservation needs good analyses and planning tools. Habitat models combined with geographic information systems can be used to study the spatial structure of suitable habitat. The Lesser spotted woodpecker (Dendrocopos minor) has been proposed as an indicator species for deciduous forests, since this species is highly specialized on insect larvae in dead wood and requires large areas of deciduous-rich environments. Many riparian forest with high species richness and high nature conservation values are found along the Ume river in Umeå municipality.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

Society and technology develop together in interaction processes. Because of the development of information technology, the Industrial society has been left behind in favor of a society where information is the key production factor, i.e. the Information society. In the Information society, social functions and processes are organized in networks. These networks integrate geographically separate markets to parts of a complex global economic system.

Internal working models of attachment are claimed to be unconscious structures operating outside the conscious awareness. Existing measures of attachment are almost exclusively explicit, either self-reports or interviews and it is questionable whether these instruments are able to tap into unconscious attachment attitudes. The main purpose of the present study is to develop Implicit Association Test (IAT) tools for assessing adult attachment and to examine their construct validity. Two sets of implicit attachment measures, based on the two-dimensional attachment model (Bartholomew & Horowitz, 1991), were developed. Convergent validity was assessed by examining (1) the relationship between implicit model of self and implicit self-esteem and (2) the relationship between the implicit model of other and implicit sociability.

The thesis has been made for NCC Teknik in Gothenburg. The NCC Corporation is one of the largest leading companies in Scandinavia within the construction industry. NCC is active throughout the whole construction process, where one part is to carry out soil investigations prior the construction of various buildings, for example residential buildings. NCC Technology wants to visualize the samples taken at the construction sites in 3D for clients, authorities and also internally to show in a simple and understandable way how contamination is spread out in the soil.The thesis includes the area of Limhamns läge in Malmö, previously an industrial area. The area has previously included a concrete factory and the contamination from that factory has lingered in the soil.

This two year masters thesis is written in the scientific field of library- and information science. The purpose of the study is to investigate the collaboration between teachers and librarians in different types of school library organisations. Two school libraries with only the school as a target group, two integrated public- and school libraries, one school library division and one public library that provides the school with school library services has been studied. The study takes place in Uppland.The theoretical framework used is based on Montiel-Overall and her four models of collaboration: coordina-tion, cooperation, integrated instruction and integrated curriculum. The first research question focuses on the col-laboration between teachers and librarians based on each of the TLC-models.

In this thesis I discuss and analyse the relationship between USA and Europe since the end of the Cold War. Many authors claimed that the Soviet threat was the glue that kept the continents together. Now that threat is gone and new challenges have risen. In what way has this relationship been influenced by the new challenges this new era stands for? By doing a case study and by using two quite different theorists, John Mearsheimer an offensive realist and Joseph Nye who is a liberal institutionalist, I?ll try to show how for example September 11, anti-amerikanism and NATO can be explained and understood.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

Do ceramics have to be static? This was the question that spurred me into this work, and what kept me working on to achieve the possibility of motion in my ceramic objects. By combining the knowledge gained through my former education as an avionics technician with my interest in the ancient ceramic craft, I strive to create kinetic ceramic handicraft suitable for interaction with an audience.By a series of different phases I slowly go from understanding what kind of motion I want my objects to have, to actually realizing this motion in three-dimensional objects. Through the use of simple models made from corrugated fiberboard followed by more advanced plaster models, combined with different complementary materials such as bicycle inner-tubing and recycled aluminium cans among many others, I, through a vast series of testing, slowly build up a knowledge base later applied to the ceramic objects.The result is for me a success; I have found a way for me to combine ceramics with mechanics. Through this I have created kinetic ceramic handicraft intended for interaction with an audience..

This thesis is based on the conception that class is relevant. The thesis discussesclass relevance and consciousness of class amongst personal at the department ofsocial welfare in Lund.I have studied different theories of class from Karl Marx, Max Weber and PierreBourdieu. The study´s empirical survey is based on interviews with the personalat the department of social welfare in Lund. Then I have applied their view onclass on models based on the theories mentioned above.Out of my analysis I can draw the conclusion that the consciousness of class ishigh and that the applied models matches the interviewed personal. An importantaspect is that class perspective is bound to class.