The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

Syftet med mitt examensarbete har varit att skriva, arrangera och spela in musik till Tritons kommande debutskiva, Beneath Our Feet. Arbetet besta?r av tva? delar, en skriftlig del da?r jag redogo?r fo?r dels en sammanfattning av den fo?rberedande kursen 2012, som legat till grund och mo?jliggjort mitt arbete. Dels ocksa? huvudarbetet under 2013 da?r jag i egenskap av projektledare, producent och musiker genomfo?rt den studioinspelning som utgjort va?rt ma?l.Den andra, konstna?rliga och klingande delen av mitt arbete gestaltas av de 8 la?tinspelningarna jag tillsammans med Triton a?stadkommit i Studio 2 pa? KMH..

Technology evolves quickly, with innovative ideas growing everywhere. Still, no technology is anywhere near challenging the mouse and keyboard for navigation of your standard computer. This study focuses on comparing the traditional technologies of mouse and keyboard with the new technology of gestures - in this case Leap Motion - in purpose of finding how the usage differs and what the potential users want from the competing technology. The experiment was executed in a controlled environment, with as few external factors as possible. We found that although the test subjects found Leap Motion fun, the test subjects do not want to surf the web with gestures.

The aim of this work is to give an example of how archaeoacoustics can broaden our understanding of archaeological remains and to further contribute to the almost non-existing research of ringing stones. With a theoretical discussion about sound from three different perspectives and by means of using different kinds of analysis, this essay will show that there are unknown relations between the three known ölandic ringing stones and the cultural landscape of Öland. Possible patterns in the placement of the stones and the possibility of the sound in this soundscape will be investigated. The essay will also suggest a resonant stone typology and discuss the necessity of one. Finally, the intention is also to shed new light upon the discussion on what the uses of the ringing stones might have been..

Internet's entry into our home has changed our communication capabilities. As a result more and more services in the digital world are available. Besides e.g. shopping, gaming and general information, different social networks now offer preventive and therapeutic health-oriented services. When being asked by several young people, with whom I have been working in a clinical setting, to offer conversations over the Internet that enables both to see and to hear each other in real time, I decided to conduct a pilot study which is presented in this paper. The aim was to investigate the feasibility of offering supportive therapy using video calls over the Internet.

As I recently started to record in a studio, I almost immediately came to the conclusion that getting the right sound is not easy. I became curious about my recording procedure. What did I do wrong? How to place the microphone? Use of equipment? How is it possible to modify the sound afterwards? Are there any special methods that are commonly used among producers and/or guitarists? My thoughts ended up in a question ? What do producers and guitarists think of the guitar sound during a recording session in relation to the final production? In my research I interviewed two producers and two guitarists about guitar recordings. The results show that the quality of the guitar sound is in relation to production and style of music.

To fence in pastures for sheep today is a major cost, especially because of the time required when using current methods. What takes most time is starting to fence off a new area, but to maintain a fence is also a continuous effort. The main function is to keep the sheep at the field.! !By interviewing and observing sheep farmers on how they work with fence today and what their problems was, I got a better understanding of the problem. Also looking at a number of other things like the context, statistics on sheep farming, laws and competition mapping gave a wider image. But the most important part in my research occurred when I talked to experts about sheep behavior.

The main purpose of this study is to, in the educator?s point of view, try to find out how pre-schools approach science and technology along with Information and Communication Technology (ICT). The survey was conducted based on qualitative interviews where two preschools participated, a total of seven teachers were interviewed. One of the preschools only has access to a computer, and the other preschool is able to use both computer and tablets in their preschool activities. The results of this show that the teacher?s thoughts about ICT are positive and that they consider it as an important part of their work and have many areas where it is useful.

Today most studies regarding marketing are made on traditional marketing channels, answering questions like which jingle is best or which TV-channel a company should focus their marketing budget on. There is also the science regarding the best way of marketing on Social Networking sites or how to get as many 'likes' as possible, and so forth. However research has also been made in the field of in-store marketing and how a retailers or brand owners can affect customers in "the moment of truth". Until now most of these studies discuss how to get the attention of the customer in the store since both time as well as level of commitment in general is scarce when a customer is in a grocery store doing the necessary weekly- or complementary-shopping. It seems like most of them make the very same conclusion; catching the attention of a customer is vital to sell them your product.

Summary The purpose of this research is to find out if technology is being used in pre-school activity, to what extent, in which way and what part the pre-school teachers believe they should have in the process. To gather information for the research, questionnaires were sent out to all pre-schools in a municipality in central Sweden. Based on that information two were chosen for observations and interviews. The work with technology in pre-schools may vary. Some pre-school teachers believe they do not adopt any technology at all when asked and all this because of their own lack of interest or knowledge, while others believe it is contained in all of their educational activities.

Jag har gjort att examensarbete som handlar om gitarrens roll i studioinspelningar. Jag genomförde arbetet genom att spela in tre låtar och göra två versioner av varje låt där jag byter ut alla gitarrspår. Med varje låt jag har gjort en grundversion som efterliknar originalet och en alternativ version där jag ändrar på både gitarrsound- och arrangemang. Jag har kommit fram till att gitarren spelar en stor roll och att man kan ändra väldigt mycket av upplevelsen av en låt genom att byta ut gitarrspåren. Jag har även undersökt hur gitarren påverkar de andra instrumenten när man byter ut alla gitarrspår samt hur både sound och gitarrarrangemang påverkar låten..

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

We are surrounded by sounds. There is always something that makes a sound: a breeze through the leaves, traffic on a distance or your own blood rushing through your veins. Human will always be surrounded by sounds which makes it an important part of our lives. Therefore the sound should have a big influence on how we perceive our surroundings and interpret our world. This essay inquires into what sounds can mean to an open space and urban spaces.