The soybean can be used in multiple ways, and its high oil content makes it suitable for extraction. Soy bean meal, a by-product of the oil extraction, is a good source of protein with a high feeding value, and is therefore used in a number of different animal feeds. Further, soy bean meal has a low production price, which is one of the reasons for the extensive export of the product. There is a great demand for vegetable-based proteins, especially in the organic production where synthetic amino acids are banned. However, the current production of soy beans is not environmentally sound and that combined with the long transport distances amplifies the need of finding a locally produced protein source.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

Lean Production is used by many manufacturing companies. Companies in process industries do not use Lean Production to the same extent today. This is part of the report's issue to explore how Lean Production can be applied to a company in the process industries.The investigated company is a processing company that manufactures various types of foil. The company wishes to streamline its production and has therefore asked the authors to examine if Lean Production can offer the company improvements in their production. Lean Production value stream mapping tool has been selected to identify and analyze the current state of two of its products in production.

Föreliggande uppsats har som syfte att ta reda på vilken syn elgitarrlärare på estetiska gymnasieprogram har kring förmedling av sound och utrustning och vilka metoder de tillämpar för att lyfta fram dessa moment i sin undervisning. Sound kan definieras på många sätt, men i detta arbete har det en innebörd av vilka klanger som olika instrument, förstärkare och diverse hjälpmedel kan producera. Målet är att ge nuvarande och blivande instrumentpedagoger en inblick i hur elgitarrlärare arbetar med dessa moment i undervisningen idag. Förhoppningen är även att studien ska kunna ge inspiration till att utveckla metoder och finna redskap som hjälper elever att skapa ett eget sound. Datamaterialet består av intervjuer med fem elgitarrlärare samt observationer av tre av dessa lärares gitarrlektioner.

Background: Mass customization has been identified as a competitive business strategy by both companies and academics because of its ability to incorporate the voice of the customer into companies? products and services. Although mass customization may sound appealing, the strategic concept is still developing and firms adopting this business strategy face several challenges. Production concerns are of high relevance since mass customization implies a high level of customer involvement in the product design. Since the areas are closely linked it is reasonable to ask how a mass customization strategy affects production concerns.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Detta examensarbete handlar om hårdrockssångares medvetenhet när det gäller sångteknik. Syftet med arbetet är att få kunskap om vilka tillvägagångssätt de har använt sig av när de skapat sitt sound och hittat sin teknik. Den teoretiska utgångspunkten för studien är det sociokulturella perspektivet. Tidigare forskning inom området behandlar traditionell röstlära, mer moderna sångskolor och socialkulturella normer gällande inlärning. Jag har använt mig av den kvalitativa forskningsintervjun som metod och mina informanter är verksamma inom området.

Purpose: To examine the hearing environment for tattoo artists regarding occupational noiseand to see whether tattoo artists are exposed to hazardous noise according to Swedish WorkEnvironment Authority regulations. Method: Using a dosimeter we measured a total ofseven sessions of approximately one hour on seven different subjects, located on five studiosin Gothenburg. As a complement we did also hand out surveys based on twelve questions toexamine habits, experienced sound environment and to see if there were any hearing relatedpatterns. Results:. Sound level measurements showed that the lower exposure action valueLpAeq,8h 80 dB(A) in one case was reached if applied to the average working time of sixhours.

The aim of this thesis is benchmarking of the program, based on dynamic programming, that earlier was written to imitate the production planning at TSS.This thesis starts with a chapter about the construction of the DP-program, a shorter description of one and each of the program parts and also a list over the in- and output data in each program part. The DP-program consists of six linked MATLAB-files that together produce an optimized production plan for the different planning groups at TSS. The program reads in and reformat the given data and optimize the production of the articles in one group. Finally it compounds all article production plans and give us a production alternative.After running the program with new data the result shows, resembling with previous results, that TSS could be able to make some distinct cost-savings. According to the program, a 50 % decrease of TSS production costs is possible. .

This is a feasibility study that examines various aspects of building a wind farm on Malmön in Norrköping. The feasibility study deals with interests of conflict, park design, electrical connections, production calculation, financial calculations and operating- and timetable.The report is divided into two distinct parts. First a theoretical part, which deals with conflicting interests, park design and electrical connections. Second a part with simulations dealing with production calculations, and financial calculations.Opposing interests are mapped so that problem areas can be found, and help put focus on the right places at a future environmental impact assessment (EIA). There are a number of areas where planners have to assess on an EIA, this thesis point on the most important areas.

Today's urban centers become denser, which contributes to higher demands on sound and noise. It is therefore highly relevant to build homes with good sound environment while maintaining living space. This thesis aimed to reduce the current concrete walls and see how the mass law affects the reduction index value and flanking transmissions. Handmade calculations were calculated according to the Swedish standard SS-EN 21354-1, where only air sound was calculated.Calculations we­­­re performed on wall elements with different weights and thicknesses, and compared with results from Bastian.In Bastian calculations of flanking transmissions were also made, this was made to see the impact of the flanking transmission when changing the mass per unit area. Mass law's impact was examined by flanking transmission and the result shows that they are not affected as long as the ratio between the thickness and the density remains the same.A questionnaire survey was conducted to determine the actual sound experience; this questionnaire was conducted on three concrete buildings in Växjö.

Today digital guides are most frequently used by the museum and tourism industries. They are also used for education purposes. They make it possible to distribute information and have it easily accessible. In addition to written information they add sound, pictures and videos which lift the whole impression of the visited place to a higher level. A variety of systems currently in use today have been evaluated.

In this paper, a navigation support approach for speech-only interaction based on auditory icons for room-based designs is presented, i.e. naturally occurring sounds that have a natural mapping to the system's underlying design metaphor. In contrast to many recent investigations that have focused on multi-modal or augmented reality systems, this paper concerns a unimodal speech and sound-only system. An auditory icon based prototype system for buildings maintenance support using a room-based metaphor was developed. The design was evaluated in a comparison with earcons and no-sound designs.

This project started when LIC Audio AB wanted help with development of a hearing aid for public rooms. The problem is that a lot of people suffer from some sort of hearing impairment. In places with a lot of people and background noise the problem becomes bigger and the sound seems to flow together. During the project we found the solution for the problem in the shape of a headphone. The headphone receives a signal from a preinstalled hearing loop.

This report contains results of our study at CTC in Ljungby. CTC produces heating products such as boilers, heat pumps and additional products to their heating systems.The purpose of the report is to make a proposal how CTC will supply their new production line for heat pumps with materials. The proposal includes a production layout and a scheme for how to place the material in the production storage.The new production line will produce two different products and both of them have several variants. The line will also have a mixed flow, so the products can be produced in a random order. These conditions demand that the production line has great flexibility and that the material to all the variants can be stored in the production storage.With these conditions as input we made a layout proposal to the company.