In Shop! Daniel Svensson is studying the Public Consume Conversation during the 90´s. Focus is based on two local papers in the Swedish town Norrköping and the Public Media Conversation, which these two represent. What kind of discourses has been dominating this conversation, that is the most important question in Shop! To answer this, Daniel Svensson uses the Critical Discourse Analysis, by Norman Fairclough, as an analytic tool. This method provides him with the possibility to connect the micro level of text with the macro level of the society. But this demands theories of the contemporary society at a macro level.

In this essay i present a study on political learning of a minority ethnicity whose political history in the institutional form began in 1993. The ethnicity in question is the Sami?s and in 1993 the Sami Parliament was established. The establishment of the Sami parliament radically changed the preconditions for political work. Sami politics came to be pursued in an organized manner in the form of a public authority and democratically elected units.

Detta examensprojekt innehåller olika frågeställningar gällande hur några av Sveriges främsta hårdrocksproducenter arbetar. Eftersom hårdrock är Sveriges andra största musikgenre när man talar om den svenska musikexporten idag 1, måste det finnas något unikt med de producenter som arbetar med denna genre i Sverige, bortsett från att vi har bra artister, musiker och låtskrivare här. Är det samarbetet mellan artist och producent som gör att en skiva låter bra, eller kanske är det den nya digitala teknikens förtjänst att det går bra för svensk hårdrock? Detta är några av de frågor som kommer att behandlas i projektet.Projektet kommer även att innehålla intervjuer med olika hårdrocksproducenter i Sverige och deras syn på de frågeställningar projektet inkluderar, vilket vidare resulterar i en analys av intervjuerna och producenternas sound. Dessa analyser kommer att vara kopplade till en framställning av viktiga saker man bör ta i beaktande vid musikproduktion av hårdrock.

I den här slutreflektionen kommer ni att kunna läsa om vårt kandidatarbete i sin helhet. Ni får ta del av det koncept vi arbetade fram och strävade efter att realisera. Ni kommer att få följa med i arbetsprocessen där vi låter er få inblick i hur vi gick från idé till färdig produkt inom de tre avdelningarna programmering, grafik och ljud. Avslutningsvis kommer vi att reflektera över kandidatarbetstiden, både som grupp och på individnivå. Några av de frågeställningar vi tar upp handlar om hur vi har lyckats genomföra projektet trots bristande planering och utan någon hierarkisk ordning samt hur det har varit att arbeta i en grupp där majoriteten av medlemmarna har haft en ny roll för första gången i ett projekt.

This paper discusses sound education within school subjects such as music, science, engineering, computer science, and Swedish to classes at the intermediate stage..

The aim of this study is to discuss the implementation of Swedish integration policy from the perspective that public officials, so called front-line bureaucrats, are the real creators of this policy. The concept of integration is far from unambigous; it can have different meanings depending on the theoretical perspective applied. This give topical interest to the question of how the concept is conceived on the national level versus the implementation level. I also aim to uncover how these front-line bureaucrats look upon their role as creators of integration policy. My material consists mainly of interviews with front-line bureauctrats.

I den här slutreflektionen kommer ni att kunna läsa om vårt kandidatarbete i sin helhet. Ni får ta del av det koncept vi arbetade fram och strävade efter att realisera. Ni kommer att få följa med i arbetsprocessen där vi låter er få inblick i hur vi gick från idé till färdig produkt inom de tre avdelningarna programmering, grafik och ljud. Avslutningsvis kommer vi att reflektera över kandidatarbetstiden, både som grupp och på individnivå. Några av de frågeställningar vi tar upp handlar om hur vi har lyckats genomföra projektet trots bristande planering och utan någon hierarkisk ordning samt hur det har varit att arbeta i en grupp där majoriteten av medlemmarna har haft en ny roll för första gången i ett projekt. Throughout this final reflection you'll be able to read about our graduation project as a whole.

I denna rapport utreds olika metoder för att kunna reglera vattennivån i vattenkraftverket Avesta Lillfors i Dalarna. Två kraftverk ligger endast 900 m uppströms och detta gör att svarstiderna blir korta och regleringen blir lätt nervös. Att använda sig av vattennivåreglering i ett kraftverk för-enklar dess styrning då anpassning till inflödet sker automatiskt.En flödestabell har tagits fram genom mätningar i turbinen, med hjälp av Winter-Kennedy-metoden. Denna tabell används för att kunna fram-koppla regulatorn och därmed dämpa stora variationer i inflödet. Dessu-tom har en modell av älven skapats och testats med en återkopplad PID-regulator.

Can degree of degenerative brain disease be predicted with the help of measurements of cognitive deterioration?Alzheimer?s disease progresses through nerve cell break down in the brain and the simultaneous deterioration of the individual?s cognitive function. This disease is common among elderly persons. This thesis examines if the level of deterioration of cognitive function is associated with different biochemical and clinical markers for degenerative brain diseases. In addition, this thesis examines if the level of decline in cognitive functions vary between groups with different levels of degenerative brain disease.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

It's an everyday experience shared by many that nature can be of help in relieving pain, reducing stress, support mental recovery etc. In the last three decades or so this experience has also found support in a large number of scientific investigations. Among other things the experience of nature has been shown to reduce stress and pain in patients and to boost concentration and reduce impulsive behavior in children. Most of this research however has mainly been concerned with the visual modality. In this thesis the aim has been to focus on the auditory modality in this context by trying to reveal some effects on people from the exposure of nature sounds played indoors in three different environments: a grammar school class room, a kindergarten play room and a post-surgery wake up room at an intensive care unit.

The aim of this thesis is to describe and compare the cataloguing rules for sound recordings: the rules used by a specialised archive and common libraries respectively. We will put the rules in relation to purposes (the objectives of a bibliographic system) and principles (directives that guide the construction of a bibliographic language). The first question to be answered is in which way the set of rules used by a specialised archive differ from the one used by common libraries. The second question examines if and how the differences can be derived from purposes and principles. The sets of rules studied are KRS (chapter 6) and the Swedish version of the IASA Cataloguing Rules (1999), worked out by the National Archive of Sound and Moving Images (SLBA).

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

AbstractTitelEffektmätning av ett utbildningsprogram ? genom lärande utvärderingEngelsk titelEffect Measurement of a Training Program ? through Learning by EvaluatingHandledareLars HolmstrandExaminatorMagnus SöderströmDatumJuni 2011Antal sidor77Nyckelordutvärdering, lärande, effektmätning, lärande utvärdering, formativ utvärderingKeywordsevaluation, learning, effect measurement, learning by evaluating, formative evaluationThe aim of this study was to investigate which effects a competence development effort has had on individuals and group, as well as in which way formative elements of evaluation possibly could have contributed to learning. The target group of the study was employees (eleven), their managers (seven) as well as co-ordinators (two) of a maintenance department at a nuclear power plant. The training program lasted from December 2009 to May 2010. The study was in progress as of September 2009 when a decision was made at the maintenance department?s training board to carry out the evaluation.

AbstractThe purpose of this study is to examine whether the individual influence at the working place leads to the perception of decreased stress. Also I looked at whether stress and individual influence is affected by the employees age, sex or employment years. Previous research shows that individual influence decreases stress but strangely enough do the research show that individual influence seem to decrease in today?s work environment. This research is quantitative with questionnaires, answered by 74 civil servants working in a department in the municipality of Karlstad.