This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

The purpose of this thesis is to examine and present the oportunities of solvingcontrol problems using Modelica. This is done by creating some demonstrationexamples with exercises. These examples should cover as many types of controlproblems as possible. The exercises are aimed for people with basic knowledgein modeling and automatic control engineering but with little or no knowledgein Modelica. There are different types of Modelica implementations and the onesused in this thesis are OpenModelica and MathModelica..

The study aims to illustrate how women victims of male violence in intimate relationships are treated during the legal process and with professional perspective describe what women?s experiences considered to be in the legal process. The study also aims to draw attention to the interventions for abused women during the legal process.The results are based on interviews with professionals in the justice system, and on observations in the courtroom. Overall our results show that abused women are in need of a great quantity of help and support before, during and after the negotiation. The legal process is very stressful for the women.

The purpose of this study is to investigate ethnic discrimination in the recruitment process. National and international law protect individuals from ethnic discrimination by potential employers during the recruitment process.Despite the laws in place to protect human rights, minorities in society do not have the same opportunities in the labor market as the rest of the population. Minorities continue to have difficulties compared to Swedish nationals in the recruiting process. Highly educated immigrants seeking employment in Sweden continue to report being treated unfairly based on their ethnic background.Ethnic discrimination in the recruiting process is based on prejudice and stereotypes that affect decisions whether it is visible or hidden, intentional or unintentional.Under the law, it is not legal to base a decision on prejudices or stereotypes. Therefore, it is important for the employer to highlight the job requirements to ensure the recruitment process is ethical.

During the end of the nineteenth century and the beginning of the twentieth century Sweden experienced social changes. The proceeding industrialization led to a process of urbanization where people were forced, more or less, in to the cities to find work. The traditional agricultural self-sufficiency society was successively replaced by salaried employment. This meant that family and home was no longer the major centre of production, nurturance and care. In order to support themselves and their families, even women applied for industrial work.

Sweden is a multicultural country and because of this the Swedish school-system should be adapted so that all pupils can develop their linguistic skills so that they can participate andunderstand the education. By using scientific work from other researchers and my own experiences from a general point of view, I noticed that pupils with foreign origin perform less good in mathematics than pupils with Swedish origin, in the Swedish education system.The purpose of this research is to find out if communication and interplay between the pupils makes it easier for them to understand mathematics and its? concepts. My research involves acertain school class were all pupils have another etnicity then the Swedish one. My aim was to find out if the pupils reached the knowledge-goals for mathematics in the third grade.

The aim of this thesis is to analyze how small and medium-sized management consulting firms in Sweden work with human resource management during digital transformation. By interviewing companies, this study explores their approach to attracting, recruiting, and developing competence. The results showed that management consulting firms have good access to candidates, made possible by having a strong corporate culture and attractive working conditions - Crucial parts for attracting talent. Social media and networking are frequently used for marketing and attracting interesting candidates. Digital tools and social media showed to be useful during the recruitment process, but personal contacts and networking still play a central role.

The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

Purpose: The purpose of this study is to investigate the innovation process of companies, and to analyse how important success factors and obstacles are in their innovation process.Method: The investigation strategy used for this essay was to interview companies that work with innovations. The essay has a qualitative approach. Both primary ? in the form of interviews - and secondary data ? literature found in books, scientific articles and internet - have been used to achieve our results.Results: The result of this essay is: there is not just one inovation process that is applicable to all companies. On the other hand, there are some guidelines that could be followed in the process.

People are given better opportunities to participate in polity today. Democratic equality entails that all individuals are equal and therefore they should be included in the process of making the decisions. How can participation be defined and does it mean that having the possibility to participate means that people can influence the process of making the decisions in polity process?This paper focuses on participation and influence in polity and examine the relationship between having the possibility to participate and having the possibility to actually influence polity process on more local level. Therefore I have been examining the citizens? participation and influence in Helsingborg which is my case study.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

The current thesis is on the rule of law and how the principles of the rule of law are met in thenew Swedish migration process. The migration process has been subjected to criticism duringseveral years and on different occasions. The migrations process is viewed through a ?rightsof the child? perspective, foremost to seek if the rights of the child are met. The children are avulnerable group, not the least in the process of migration.

The aim of my study is to examine how six teachers discuss their choices of work methods in teaching mathematics, as well as the methods they are currently using and what they have based their choices on. This study also covers how these teachers approach educational planning and where they get inspiration for their teaching material, and finally the advantages and disadvantages of each method according to the teachers. To be able to fulfill my purpose of this study some questions had to be considered: How do these teachers approach the planning of studies of mathematics and where do they find ideas for their lesson planning? Which methods do these teachers use in the teaching of mathematics and what are the reasons behind their choices of methods? Which advantages and disadvantages do these teachers see in the methods they use during the teaching of mathematics? This is a qualitative study, mainly based on qualitative research interviews according to an interview guide. Six teachers, from five different elementary schools, grade 1- 3, have been interviewed for this study.