The purpose of this work was to research how baby nurses define the concept child maltreatment and how they conduct themselves to mandatory reporting.The central questions were; How do the baby nurses interpret the concept child maltreatment and which children do they consider comprehending the concept?What are the reasons that children are maltreated according to the baby nurses opinions?Do the baby nurses apprehend that they meet children that are maltreated in their work?How do the baby nurses interpret the mandatory reporting and what course of action do they use when they suspect child maltreatment?Nine baby nurses were interviewed. The material was analyzed with the help of a phenomenological method.The participators idea of the concept child maltreatment was focused on observing signs from the child and concrete actions from the parents. The outcome of this concept is that the participators categorization is neither or nor. The participators knew about the mandatory reporting and they did a further interpretation because they focused on the risk of the child.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

This piece of work develops a solution that automates protection against software keystroke loggers. Keystroke loggers can be used illegally to register a user's keystrokes and in that way acquire sensitive information. The solution was tested on two different networks and the efficiency was measured. The network represents an enterprise network that uses the operating system Windows along with the directory service Active Directory. A script was developed to solve the automation matter.

AimThe aim of this interview study was to examine how PE teachers related to factors (ramfaktorer) affecting the implementation of outdoor recreation in school.MethodWe conducted a qualitative interview study with six PE teachers in the Stockholm area. These were selected after all the PE teachers in Stockholm were contacted via e-mail. In the e-mail they declared the number of outdoordays (friluftsdagar) conducted at their school, for grades four, five and six. The selection was carried out in that we chose the PE teachers who declared the most and least number of outdoor days. After the transcription of the interviews we divided the teachers in to two groups, based on the width of outdoor activities in their teaching.

This thesis is an evaluation of the new traffic solution at ?Skvallertorget?. The innovative theory behind it is to increase traffic-safety by introducing insecurity feelings for road-users. The conclusion of the evaluation is that the newtraffic solution is well adjusted according to guidelines for municipal traffic planning. The evaluation also illustrates the conflict between traffic planners deliberate attempt to avoid clear information and the road users wish to get it.

In my degree project I have focused on how to make it easier for ambulance personnel to remove a motorcycle helmet after an accident. During my research I have interviewed ambulance personnel from different cities and a trauma surgeon to get a better understanding of how they work today and the problems they experience. Some of the problem areas are that you need a lot of force to remove the helmet, that the padding catches the ears and that the chin guard catches the face. Since ambulance personnel always assume that there is a neck injury after an accident, all these problems make it difficult to remove the helmet safely.The result is a motorcycle helmet with a focus on safe removal after an accident, to reduce the risk of worsening a neck injury. The solution suggested is that a small part of the back of the helmet is detachable, to make the opening larger.

Intramuscular injections to cats can generate strong reactions in some individuals while reactions of the same extent, according to the author, not always are recognized when using the subcutaneous route. The reactions are probably caused by fear, stress and/or pain. When the injection can generate pain one has to take that into account, which can be a limitation in treatment. It is well known that injections generate pain, but knowledge about the cause and processes of the injection-associated pain is limited. This is mainly due to the difficulty in finding objects to study pain on, high cost of use of laboratory animals and difficulty to obtain objective measurements. Although there is evidence that there may be a local muscle injury by intramuscular injection, it is not always that the extent of damage is related to the pain experienced. Facts about the causes of injection-associated pain have been studied in a literature review.

This report describes the construction and development of a control box, which is a tool for testing and verifying a certain model of Rapid?s built in staplers (model A6102). Basically the function of the control box is to interpret any errors that may occur in the stapler and to make it possible to test fire the stapler.The control box should be able to communicate with the stapler using a specialized communication protocol. The different data such as errors, firmware etc. from the stapler is presented in plain language on a display.

In some coastal areas in Sweden water shortage sometimes appears because the withdrawal of groundwater is greater than the groundwater recharge. It creates a situation where the available groundwater is insufficient to support residents and businesses with drinking water. The high withdrawal of groundwater also creates a risk for saltwater intrusion to drinking water wells. The problem most commonly occurs during the summer when the groundwater recharge is low, but the population is high, due to tourism and summer residents.The purpose of this study was to investigate how local water supply in areas affected by water shortage can be solved as sustainable as possible. The work was divided into three parts where the first part comprised of a literature review on water systems in which four different options were investigated: artificial groundwater recharge, rainwater harvesting, desalination and water reuse.

This report contains a study of replacing nuclear power with biofuel. The nuclear plant, OKG north of Oskarshamn in Sweden has been chosen and an extensive literature study about the nuclear plant has been implemented. The main aspect of this report is the availability of biofuels and whether it would be economically sustainable. Sweden?s most common biofuels are examined with regard to scope of use and potential.

The aim with this study is to achieve an increased understanding and knowledge about terrorist groups. The factors that the study come to be focused around is the groups' objectives, their organization, which enemies they have and with which means that they use for there terrorism. In order to respond to this aim the four different terrorist groups, Colombian revolutionary armed forces (FARC), Baskien - our native country and our freedom (ETA), red Army fraction (RAF) and al Qaida is studied.To achieve the aim of this study the methods qualitative text analysis and comparative method is being used. It is designed also within the framework of this study a categorization model that is used as method in order to do a division of the studied groups based on their objective, enemies, organization and means. The model is also constructed to be used in order to analyze others terrorist groups than these current groups.The result of the study is presented in the categorization model on page 32 in the essay..

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

In my degree project I have focused on how to make it easier for ambulance personnel to remove a motorcycle helmet after an accident. During my research I have interviewed ambulance personnel from different cities and a trauma surgeon to get a better understanding of how they work today and the problems they experience. Some of the problem areas are that you need a lot of force to remove the helmet, that the padding catches the ears and that the chin guard catches the face. Since ambulance personnel always assume that there is a neck injury after an accident, all these problems make it difficult to remove the helmet safely.The result is a motorcycle helmet with a focus on safe removal after an accident, to reduce the risk of worsening a neck injury. The solution suggested is that a small part of the back of the helmet is detachable, to make the opening larger.

The objective of this thesis was to get more knowledge about how to design a dairy farm reducing the working hours and the work tasks whit high work load. I will try to reduce the working hours and the tasks whit high work load on my own farm witch I am about inherit. Today, the old stanchion barn has room for about 60 cows and 74 young cattle and need two men to run it every day. The total acre is 188 hectare, 100 hectare forest, 65 hectare farmlands and 23 hectare natural pasture. I have studied two solutions. In the first solution, I will use my old barn for young cattle and build a new barn for the cows.

Completed durability testing of gearshift gaiters at Kongsberg Automotive in Mullsjö, is sometimes leading to discussions regarding whether or not a gaiter is supposed to be a pass or a fail. That is because the current pass/fail-criterion are a bit vague. A durability test takes around 4-5 weeks to complete which is a long time if the tested material does not pass the test and a new material has to be tested instead. Stricter pass/fail-criterions and a faster testing method for the materials are therefore desired.In order to develop a durable pass/fail criteria, seven already judged gaiters were chosen. Every one of the gaiters was put through detailed analysis, after which there were a new assessment of the gaiters.