We performed our thesis at SCA Hygiene Products in Falkenberg. Our task has been to present a suggestion for a solution of the packing of giveaways that the company uses.In the current situation the work is performed manually, and the company wants to automate the process. In the following report, we present the different solutions that we have developed in our definite model. It includes a picking solution, a shaking table and trays. The product choices we have made are based on existing solutions.To help, we have used Fredy Olsson's books in principle and primary structure.

AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

Where is technology heading? And how will our behaviors towards these new innovations look? This project questions the direction of ?beyond smart? products, through scenarios within our everyday life. The work is both critical and speculative. Speculative in the sense that it is speculating in how a future scenario with ?beyond smart? products would look like.

A current debate is going on in Sweden about the health-care organization, how it is structured today and how it should be structured in the future. Despite major changes in the county council structures, they still got problems with for instance economy and the providing of staff. As an answer to these problems new solutions are being developed.In this thesis I examine such a solution consisting of cooperation between county councils. The aim of the thesis is to examine how and why the county councils in Sörmland and Västmanland have made a decision regarding cooperation over the administrative border.My contribution is to construct a model over change and decision processes that can be used in other cases as well. The conclusion is partly that the decision to cooperate is built on changing structural factors, such as economy, demography and medical development.

In this paper, a small business network with around 30 users is analyzed with respect to security, performance and usability. Based on this analysis, two suggestions on how to solve the problems listed are given. The first suggestion focus on keeping a low budget, while the other tries to deal with the problems more thoroughly. One advantage of the first suggestion is, in addition to not straining the company's budget more than nessecary, it does not involve too great changes in the way the network is used and administered. On the other hand, the smaller budget leads to certain compromises, and there is a risk that similar problems occur again if, for example, the company would grow.

During the study's first stage we noticed that the Swedish term ? utanförskap? was constructed for political purposes, the term?s ambiguity what was first raised our interest. Therefore the aims of this study was to examine how social workers at the social welfare office and the labor market related project Framtid Kronoberg  as well as politicians within the administration of Arbete & Välfärd (Work & Welfare) relates to utanförskap as a social phenomenon. The study?s second aim was to examine how the aforementioned persons consider utanförskap to be counteracted among young adults.

Typically, when Faurecia in Torsås are planning a new assembly line, one of the steps is to build a full-scale model of the line in card board, a form of mock-up planning. Faurecia has shown interest in finding an alternative methodology. The purpose was to explore the possibility of replacing today's cardboard based mock-up planning with models in a digital simulation environment.The purpose of the thesis has been to answer some of these complex questions; What are the benefits of using a simulation tool? In what way can we use it? If we choose to use a simulation tool, in what way does it affect our way of planning an assembly line? What are the advantages and disadvantages? Are there any economical and social aspects?Our results made us realize that a digital simulation tool does not replace the card board. On the other hand simulation could be used as a complement.

Jönköping Energi AB (JEAB) is a local energy supplier for the county of Jönköping. JEAB also maintain the local Metropolitan Area Network (MAN). They have recently installed GPON in a portion of their network and have connected it to the MAN via an Extreme switch.However JEAB would prefer to use Cisco equipment instead of Extreme since the MAN comprises of Cisco hardware. They require a solution to connect GPON to the MAN with a recently purchased line card (Cisco 7600 ES20) which can be installed in a Cisco 6500 Catalyst switch. There is also a possible solution with an Alcatel-Lucent 7450 ESS-1 switch.

The graduation essay has been carried out in co-operation with Kalmar Industries in Lidhult, Sweden. The purpose of our essay was to develop a complete construction solution on a hoist that could lift a laying wheel, lift it up and then turn it 90 degrees. After that the wheel shall be placed in a special holder.The background of the essay is a record of reports of damage wheels when they been incorrect lifted with a forklift. The hoist shall be used together with the same forklifts that manage the wheels today. Together with our instructor at Kalmar Industries we developed a requirement specification and from that we got free hands.However this was not the main task from the beginning, then a simular hoist should be develop but used directly in the assembly workshop without using a forklift.We started to find principle solutions that later was evaluated against the requirement specification.

One of today problem at IVT industries would be assembly of insulation on water cisterns. The element of assembly insulation on the cistern gets too elevated; hence one has to climb onto the stand the cistern is assembly on. This will increase the risk of work related injuries when there is a risk of falling down. It?s also rather strenuous on shoulders due to work with your arms high above your head.

AbstractThe purpose of my study is to compare Sten Rydhs wiew of learning disabilities in mathematics and his education with current literature and research. I want to explore whether the education of ?Mattesmedjan?*, influenced by the Suzuki method, can be the solution for the students with maths problems. ?Mattesmedjan? is a privately-owned school of maths.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

This thesis aims to analyse the problems concerning the reorganization of the Swedish consulary system, which took place right after the Swedish entry in the European Union in 1995. This thesis shows the underlying debate in the Parliament before the changes. It also discusses which factors caused the reorganisation. My work focuses on the Swedish consulary representation in Spain which exist of an embassy in Madrid and 20 underlying honorary consulates. The consulates are not foreign authorities but are still handeling a lot of cases as an govenmental authority.

This report investigates a possible solution to the problem with adapting wave powerplants to work in countries with tidal water. The wire connecting the buoy at the surface with the generator at the bottom needs to adjust to the varying water depth. Our solution to this problem is to attach the wire to a jack which is then placed inside the buoy. The jack is then powered by an electric engine. The report discuss what forces the buoy will be exposed to and then the structural integrity of the design is evaluated through simulations.