This study focuses on carpooling and how carpools can be better integrated into today's society. The purpose of the study is to investigate what affects the motorist?s decisions to become a member of a carpool. The study will highlight the barriers and drivers of membership in a carpool. It is important for the future to change the attitude of motorists and get more motorists to choose more sustainable modes, as is the concept of carpooling is a good solution.The study is based on a qualitative approach with six respondents from the Eskilstuna municipality.

When single-family lots are valued for development of new residential areas,the valuation is influenced by several factors. The valuation is a matter ofdefinition that varies according to its interpreter. Previous research conductedin other countries, has identified a number of value-influencing factors. Thesefactors are the basis for this study.The study's purpose is to highlight the value-influencing factors thatcustomers value and are looking for in the choice of single-family lots. Thestudy also seeks to determine if there is an unknown difference between howprofessionals and clients value single-family lots.The study showed that the value factors considered important for customersand also professionals are consistent and applicable with the factors reportedfrom previous research.

Modern agriculture equipment are more computer based today, and many equipments use a terminal in the tractor where the driver have the opportunity to make adjustments to the equipment. This is the reason why ISO developed a new standard called ISOBUS. It is a communication standard based on CAN specially adapted for griculture equipments. The purpose of the standard is that it should be ossible to equip a tractor with a standard terminal called Virtual Terminal that can be used to control the equipment. The use of the terminal should be independent of the manufacturer of the tractor as well as of the equipment.The purpose of this report is to ?nd a solution of how to use CC Systems on-board computer, CCP XS, as a Virtual Terminal.

Guazuigua is a small village in Bolivia, which has had too small water resources, especially for irrigation. A project started after some studies were made, to create a canal to provide the village with water from a nearby town. To make the canal work it had to cross a dried out river. There have been several attempts to cross these dried out rivers, but with poor results. The purpose of the report is to provide a solution for this problem.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

Northeast Stockholm is a region developing fast. There is already a great need for new transport solutions for the people commuting to the city, since long queues slow down car traffic and the local railway, Roslagsbanan, needs to be upgraded to attract more travelers. The competitive advantage of rail?traffic over the car when it comes to greenhouse gases and air pollutants is another reason to develop Roslagsbanan.This report investigates the differences between car and train to create a basis for a proposed expansion of Roslagsbanan. Once the proposal is presented, costs, emissions reductions and public benefits are analyzed.

The thesis demonstrates protection solutions that can be suitable for a camp during internationalmissions in order to resist complex threats. The threats could consist of small arms, machineguns,RPG 7, anti armour missiles, mortar, artillery, HPM-weapons, car bombs, biological and chemicalweapons as well as sabotage and theft. It?s not the technology itself that makes the threat scenariocomplex it?s the way the opponent acts during the operations. The opponent acts usually incivilian clothes and therefore he is difficult to distinguish from other civilians.

A new curriculum, Lgr11, was introduced in Sweden during the Autumn Semester 2011. My aim in this paper is to investigate whether an integrated and interdisciplinary approach is possible within this new Swedish curriculum.Firstly, I will describe the approach to integration and interdisciplinary work used in the new Swedish curriculum. Secondly, I will analyze whether the curriculum allows for an integrated and interdisciplinary work.The method used in this paper is a qualitative textual analysis and analyzing the new curriculum´s approach to integration and interdisciplinary education has been the focus. The analysis has been based on the explicit and implicit basics of integration and interdisciplinary work in the curriculum.I assume theories of subject integration and curricula to come up with my results in the paper.To conclude, the results of my analysis of the curriculum show that an integrated and interdisciplinary approach is not only possible, but it is also each school Principal's responsibility as well as part of each teacher`s objective. The Principal's responsibility is to ensure that the integration and interdisciplinary approach is undertaken in school. The curriculum is clear that teachers should let their students work interdisciplinary as well as vary their methods of teaching.

This degree thesis is based on an assignment from BEOMAT in Storfors. BEOMAT is a company that constructs and sellsclay pigeons to both the national and international market.Our main purpose with this paper is to find a solution/system that can replace the expensive and space demandingOlympic trap facility. Our solution will replace fifteen clay pigeon throwers with one automatic thrower whosimulate all throwers together. The system will be provided with an appropriate control system for mass productiontherefore this system needs to be user-friendly so no previous knowledge is required.Totally 405 different throw coordinates will be stored in the programme in nine different subprograms. According tothe Olympic-rules the throwers should coincidence within certain specified conditions, this will be solved with anrandomizer in the programme.

Ten cows suffering from displacement of abomasum (DA) were treated with two different electrolytesolutions. The DA cows showed symptoms typical for the disease. Four out of 10 cows had a metabolic alkalosis and two a metabolic acidosis. The cows were mildly hypocalcemic, and 9 out of 10 were mildly to moderately hypokalemic. Six out of 10 cows showed muscle fasciculations.

The purpose of this study was to investigate pupils' and teachers' experiences of using the simulator computer game Minecraft in connection with the Swedish school competition Future City. The study examines how students (ages 14-15) and teachers have experienced the use of Minecraft, what the students have learned in relation to everyday education and the different forms of education during Future City and also examine which patterns that exists in the experiences of the students, with personal interest of and knowledge of Minecraft as a benchmark. The study was conducted through individual semi-structured interviews with both students and teachers. The analysis of the results is based upon a theoretical perspective that includes a socio-cultural view of learning, as well as the lines of reasoning in previous research about computer games and learning. As a general approach towards the study, and in a way, a justification of the chosen research method, a hermeneutic approach was used.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.