This thesis describes teh solution of two problems regarding safety on powered lawnmowers; protectning the users from injury when using the lawnmower in slopes, and when cleaning the cutting blade.The task was carried out through initial studies on a representative lawnmower. A generation of ideas followed with an evaluation to select the best solution. The winning concept was further developed to reach acceptable performance. The word resulted in a functioning prototype utilising an original way of detecting inclinations without incorrect signals. It c an serve as a platform for further development into a product.The work gives insightful experience of solving real-world problems, and especially to deal with situations where several variables and their effects are unknownPlease note that several parts of the work are confidential, and have therefore been removed from the thesis..

The purpose of this essay is to examine Cognitive and Psychodynamic theory in the ways they approach spirituality. How and whether or not the personal view of spirituality affects the professional role of the psychologist is investigated. Data from six semi-structured interviews with psychologists have been collected and analysed in a qualitative, phenomenological method. The results reflect two main topics and several subsequent headlines with regards to: 1) the psychologist's professional approach and 2) the area in between the psychologist's personal and professional approach to spirituality. From empirical studies and relevant theories, a discussion is held about the psychological approaches to spirituality in psychotherapy.

Sweden is seen as one of the world?s most feminist societies. In January 2009 all grounds of discrimination were merged into a common law; Diskrimineringslagen. This paper examines representations of gender discrimination, linked to feminist perspectives, in the Parliamentary debate on Sweden?s new discrimination legislation through a discourse analysis.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

For this study I use a critical realism approach and the aim with the thesis is to elucidate humor as a socially reflexive tool. My investigation has its starting point in the stand-up comedy arena, which I mean can exemplify a social context where the communication is focused around humor. I mean that humor can be used to create imaginary variations of the knowledge and truths, which we live our lives according to. The asymmetrical interpretations of the socially reflexive tool humor can be used to identify, elucidate, and cope with the diverging truths of life. But even though humor has boundless possibilities to reshape knowledge, it is also limited by the social contexts where it is mediated and by the involved individuals that create the humor or sanction the humor positive and/or negative..

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

In this report I have made various comparisons between different client solutions; a standard client solution (PC-server), to use as a comparison and look at various differences in costs against the other client solutions that I have compared, which is Windows Thin PC, Dell Wyse, Red Hat Enterprise Virtualization and FSData terminal server/thin clients. All these solutions require a form of server to work against, which also the standard solution uses, but the main difference is that most of the data and computing power is on the server instead of the client.Window Thin PC, Dell Wyse, Red Hat EV and FSData all use some kind of thin client as hardware. Some of the main differences is that Windows Thin PC can be installed on almost any hardware. Dell Wyse is a special hardware group from Dell, that uses its own proprietary software, and Red Hat EV which is based on linux, is the cheapest option where the only cost is for support. FSData terminal server/thin client use as the name suggest a terminal server and a form of thin client to connect to it, the solution essentially means that your rent the complete hardware from FSData.The comparisons are made with the view of different scenarios based of the number of clients, where costs and licenses, as well as time spent on installation, upgrades, monitoring and managing are some of the main points raised..

The purpose of the study is to investigate methods and work procedures that aim to motivate people to leave a cult and/or supporting them after a cult exit. The study was limited to investigate how Sweden?s, within the area, three premier voluntary organizations Föreningen Rädda Individen, Rådgivning Om Sekter and Hjälpkällan work with present -, ex ? and relatives to cult members. In addition to the mentioned organizations we have also investigated the work procedures and methods used by Åke Wiman. The study has got a qualitative approach and includes semi-structured interviews.

The flow of information in road vehicles intensifies as new techniques develop. Informationsources such as cell phones, navigation equipment and radios demand the driver?s attentionwhile he or she must stay focused on the road to perform a safe driving. Today the visualinformation inside the vehicle is mostly located on the dashboard, which forces the driver tolook down when shifting attention between the environment outside and the informationinside the vehicle. One way to avoid this is to useHead-up Display (HUD), a technique thatprojects information in the visual field of the user.This master thesis has been performed in cooperation with Scania CV AB, a world leadingtruck producer.

The legitimacy of the European Union is being questioned, and this has put focus on the democratic deficit, as the main reason for the negative outcome of the referendum about implementing the last initiated treaties of the union. In this essay the credibility of the problem solving strategy through the communication policy of the commission is being put under the scope. The objective is to treat the credibility of the solution to the main problems of the EU as an important part of how the democratic, political system works and how it deals with taking care of its? supporting and demanding channels of communication. The importance of a citizen platform to form common interests and a strictly European dialogue using media, common debates and several other possible ways to advocate this solution throughout the whole union is stressed here..

I have in my thesis, examined the possibilities in terms of energy for a condominium association.To have an effective and good energy is becoming increasingly important with today's rising electric and oil prices. In my thesis I have used the condominium association Kärralyckan, which is situated in Falkenberg. The buildings at Kärralyckan are built in the mid-1970s, and are heated by electric radiators. The tap water is heated by an electric boiler.Based on that calculation I can show the various energyststem. The different solutions have been developed by contact manufacturers and installers through phone calls and e-mail.According to the results shows that geothermal heating has been a great solution for Kärralyckan.

When I was fifteen I decided that I wanted to become a blacksmith. At the time of my decision I had been obsessed with fantasy for several years. I came to the conclusion that if I could not live in a fantasy world then at least I would make bits and pieces from it. That became the entry point of my fascination for material and techniques. I started with blacksmithing since it had an aura of magic or mystique in the material and in the making process.

This is a report written for an examination project C-level, on the subject of energy. The examination project is a product of the FVB Sweden AB (district heating bureau). It started with a meeting with Stefan Jonsson FVB Sweden AB, were he explained the content of the project, and from this a presentation of the problem was made. The problem that needed to be solved was how they could control the valves in the system to provide heating to everyone in the system. The valves are often oversized so the pump in the heating plant would have to be enormous to be able to provide enough flow to be sufficient, if everyone in the system had there valves fully opened. I came up with two solutions to the problem, one was a wireless network that could keep track of the valves and the other solution was an extra sensor that was placed on the radiator.

The purpose of this paper was to investigate how the Child mental Health Service, BUP Ektorp, textually constructs its demarcation, by studying case records from the first evaluations of the patients. The main questions were: In what way are the competitors and their problems represented in the texts, how is the solution justified and explained, and how do these factors relate to each other? The method being used is discourse analysis, influenced by Mörkenstam. The main conclusions are that the demarcation consists of a number of onceptions about the child, the parents, and the therapist. The conceptions, together with the way the problem is being described, justifies the proposed solution, proclaiming termination of the case..