The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

This report will detail the participator view of partnering in Kvarteret Frodeparken. Kvarteret Frodeparken is a new construction project being jointly delivered by Skanska Sverige AB and Uppsalahem AB. The report will focus on the comparison between the participators view of partnering with an emphasis on common partnering goals. The report will also focus on the economical benefits, the time benefits and the social environment benefits you can find in partnering.The principals of partnering are; participants together make the common goals for the projects, make ice breaking activities to improve stakeholder engagement and working with an open economy to find the profitable choice for the project. With a combination of the three principals the team together decide the best solution for the project.

 Date                   May 28, 2009Level                  Bachelor thesis in Business Administration/Information TechnologyAuthors             Jennie Andersson, Niklas Fridell, Visar HoxhaTutor                  Marie MörndalDepartment    HSTTitle                    ERP-solutions in small to medium sized enterprises ? possibilities and problemsSummary          ERP-solutions have penetrated the market for SME: s, offering the same advantages larger enterprises have enjoyed for years. For a significantly cheaper price, SME: s can nowadays acquire ERP-solutions and become more effective and increase their profit.  The authors have examined five SME: s in both the production and service company segment and have come to the conclusion that an ERP-solution would indeed benefit these companies in many levels but also induce certain obstacles the examined companies must overcome, both financial and organizational.Purpose            The purpose of this thesis is to examine if and how SME: s can become more efficient and developed and increase their profit by implementing an ERP-solution. Further, the purpose is to discuss which conditions that exists for the examined SME: s in order to implement an ERP-solution.Method            The thesis consists of a qualitative research where the authors have interviewed either the owner or employees at management level by using semi-structured interviews.

Business and organizations use computer network in a greater extension than ever before, especially for business-critical use. That increase the demand of security for all systems, both against internal and external threats. The demand on the authentication method used today increases. Today they normally uses password or some kind of smart card. I will performa literature study that will investigate the possibility to increase the security in authentication of users without the use of extra hardware.

The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

The result of this master thesis report describes the advantages and the drawbacks that will arise when implementing an Ethernet based intercommunication system in military vehicles. The report presents a possible solution and describes how different sound applications will be implemented into the suggested solution. The report show that IP LAN in vehicles leads to more advantages than drawbacks. The main advantages are that all kind of media can share the same LAN and that there is a lot of knowledge of this technique in the civil area. The main drawback is about delay.

In motorsports competition, safety reasons require that the vehicle is equipped with some form of protective roll cage. The roll cage should withstand the forces involved in a collision to protect the driver and the co-driver from the vehicle body deformation. The roll cage also works to protect the vehicle from excessive deformations to more easily make any repairs afterwards. For the roll cage to be certified and approved for motorsports competition, it requires that the cage is built after one of the recommended options. One of those options is to design the roll cage like a cross-construction at the driver and co-driver doors.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

This paper evaluates the prospects for utilizing aquaculture effluents as a nutrient source in organic hydroponic, as is the case in aquaponics. The development of organic hydroponics is dependent on replacing synthetic fertilizers with organically derived nutrients, such as those found in aquaculture effluents. Also, in hydroponic cultivation the establishment of a plant pathogen suppressive micro flora is part of the plant protection strategy. Therefore, both nutritional and microbial qualities of aquaculture water and organic hydroponic nutri-ent solution were analyzed and compared. Results showed both aquaculture water and or-ganic hydroponic solution to be deficient in a number of essential elements, although or-ganic hydroponic solution was closer to recommendations.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

We performed our thesis at SCA Hygiene Products in Falkenberg. Our task has been to present a suggestion for a solution of the packing of giveaways that the company uses.In the current situation the work is performed manually, and the company wants to automate the process. In the following report, we present the different solutions that we have developed in our definite model. It includes a picking solution, a shaking table and trays. The product choices we have made are based on existing solutions.To help, we have used Fredy Olsson's books in principle and primary structure.

This report will detail the participator view of partnering in Kvarteret Frodeparken. Kvarteret Frodeparken is a new construction project being jointly delivered by Skanska Sverige AB and Uppsalahem AB. The report will focus on the comparison between the participators view of partnering with an emphasis on common partnering goals. The report will also focus on the economical benefits, the time benefits and the social environment benefits you can find in partnering.The principals of partnering are; participants together make the common goals for the projects, make ice breaking activities to improve stakeholder engagement and working with an open economy to find the profitable choice for the project. With a combination of the three principals the team together decide the best solution for the project.

Energy price are on the way up to a high level that will not diminish in the future make us to focus more on the sustainable development for a better solution of residential houses. Passive house or low energy housing are one of the solution to make residential more environment friendly, in same time it´s a financial security using less energy, and saving money. The last 10 years in Germany and all around Europe the concept of passive house been developed, and people aim to know more about these concept that leading the market more attractive for passive houses. A passive house is a well designed building highly insulated and air tight with mechanical ventilated system for the whole building envelope that minimizes the use of energy for heating [1].The housing company Mimer has chosen to invest in low energy consumption in every new housing project.  These future plan projects are decided to use less than 75 kwh per square meter annually in purchased energy [2].This thesis is about new constructed passive houses, and focuses on the evaluations of the temperature, and moisture condition for attic, external walls and joist.