The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

Our purpose with this study was to investigate whether there was any difference between high and low performing students from selected aspects such as choice of studies, achievement, self-image, motivation, confidence and career choices.A training professional in today's schools requires knowledge of how young people think about their lives for us to help students develop both high-and low-performing students. Students have different conditions, but no matter good or bad conditions, each individual pupil must be allowed to develop.The concepts used in the study are of study, self-image, motivation, achievement in the future and career choices. In the background, describes these concepts through literature study. The method we have used was semi-structured interviews. Which means a fixed structure, but with room for follow-up questions.The results of our study indicate that there were clear differences between high-and low-performing students.

In a press release from the Swedish church it says that the pressure from people who are in need is increasing on the deacons in Sweden and that it?s getting higher each year. This study contains the search of knowledge about the deacons of the Swedish church, if they actually feel an increasing pressure and in what way, how they are handling the possible pressure from people in need, if that pressure is too high and if the deacons feel that they can assist the people seeking their help. The study also aim to provide more knowledge about the deacons experiences of the opportunities and boundaries (or obstacles) they meet in their line of work and how they handle the boundaries when/if they can?t provide the help that the people need.

The objective of this study was to get a better understanding of how the cultivation methods influence the vitality in Prunus avium. The purpose was also to examine if there was any differences in shoot growth and trunk expansion depending on the method of cultivation. To find the answer to this question a literature study and a case study has been done. The literature study concerns the concepts vitality and stress. Different definitions of these concepts are shown and their connection whit establishment is explained. In the background the species Prunus avium, and the four method of cultivation that are included in this case study are described. Measurements of the shoot growth and trunk expansion were made in this study, and as a complement to these methods, a visual estimate of the vitality was made.

This master?s paper first presents some of the principal theories and concepts developed by the poverty researchers Rowntree, Titmuss, Townsend, Sen and Lister. These theoretical frameworks are then related to two documents from the EU and Sweden concerning combating poverty and social exclusion, bearing on the establishment of the ?Year 2010 against Poverty?. Finally, I discuss the value in practice of these theories and policy documents, as regards reducing poverty in Europe.It has become clear in this investigation that the theories and concepts from earlier research are still relevant to the formulation of contemporary policy programmes, and that earlier research helps us to avoid old traps in fighting poverty.

The aim of this Masters thesis is to conduct an analysis of the Swedish classification system the SAB-system from a feminist and queer theoretical perspective. The theoretical framework of the study is feminist and queer theory as well as theories from Library and Information Science, mainly classification theory. The study takes its departure from the idea of classification systems as social constructs, reflecting their time, place and society. Paul Ricoeurs critical hermeneutics is used as methodological guidance. This gives room for a critical perspective in the interpretation.

Traditions are something that is very important to many people, Christmas is usually no exception. Christmas tree, Christmas ham, herring and candle lights are just as important as the advent candlestick. The advent candlestick help you get the Christmas feeling during the countdown. In this report the work with a new advent candlestick concept can be followed step by step.A lot of information was needed in the beginning. By doing some research, surveys and interviews the ground was established for further work.

Intramuscular injections to cats can generate strong reactions in some individuals while reactions of the same extent, according to the author, not always are recognized when using the subcutaneous route. The reactions are probably caused by fear, stress and/or pain. When the injection can generate pain one has to take that into account, which can be a limitation in treatment. It is well known that injections generate pain, but knowledge about the cause and processes of the injection-associated pain is limited. This is mainly due to the difficulty in finding objects to study pain on, high cost of use of laboratory animals and difficulty to obtain objective measurements. Although there is evidence that there may be a local muscle injury by intramuscular injection, it is not always that the extent of damage is related to the pain experienced. Facts about the causes of injection-associated pain have been studied in a literature review.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

Detta examensarbete genomfördes våren 2013 på Karlstads universitet där TD Rail & Industry i Västerås stod som uppdragsgivare. Projektet innefattade att kartlägga nuvarande omlastningslösningar av enhetslaster mellan järnvägstransporter och vägtransporter, och utarbeta en konceptuell omlastningslösning med fokus på att öka järnvägstransporternas flexibilitet gentemot vägtransporterna. Där vikten lades på att utarbeta ett välarbetat helhetskoncept.Projektet genomfördes med designprocessen som grund och innehöll bland annat momenten; förstudie, kravspecificering, idégenerering, konceptval m.m.Resultatet blev en vidareutveckling av det redan befintliga systemet CCT som bygger på horisontell överföringsteknik och möjliggör därför omlastning av enhetslaster direkt under kontaktledning. Skillnaden mellan RES och CCT är att man tagit bort ombyggnationen av tågvagn och lastbilschassi, som var en av CCTs stora svagheter, genom två hydrauliska ?teknikplattor?.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

This bachelor thesis contains the findings of an investigation into the laying of wedge sawn wood flooring. The advantage of wedge sawn wood flooring is the usage of more material from each board reducing waste. The boards follow the natural profile of the tree where the root part of the board is wider, and the top part is narrower. The technique involves placing boards side by side with adjacent boards in opposite directions. The thick base of one board is neighbored by the narrow top of another, this creates a pattern of wedges in alternating directions, known as a ?root and top? system. Existing literature into this type of flooring is sparce.

Title: The lost song. A study of a reconstruction process. I was asked by the daughter of the Swedish composer Svea Welander (1898 1985) for help to reconstruct a now lost song for voice and piano originally composed by her mother, where the melody of the song was used in the second movement of her first string quartett. The song was composed in 1955, words by Wilhelm Ekelund. My aim has been to describe the process of reconstructing the song.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.