2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

The purpose of this study was to try to develop a better understanding of the process that being a member in a new religious movement might imply, and to find out how the identity of a defector changes from the time upon entering the movement, while they are within the movement and after leaving the movement. We also wanted to examine what kind of help and support would be needed around a defection. The study focuses on identity and our questions were: How does the defector describe him/herself and his/her identity before joining the new religious movement until the period after defecting? What demand for support and help may there be when defecting from new religious movement? The theoretical starting point was The Identity Theory, Structural Role Theory and KASAM. A qualitative method was used and four defectors from new religious movements were interviewed.

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

This thesis work is intended to analyze whether the municipalities has a need for the new technology of mobile mapping.Mobile mapping consists of the technologies of laser scanning, photographing and positioning of streets and roads in city environment and in the countryside. When these technologies are operating together a georeferenced three-dimensional image model is created, which has specific coordinates that states its position on the surface of the earth. Thanks to the laser scanning process even measuring can be performed in this model.The municipal sector consists of many different departments which use visual spatial information. These departments are an interesting target group for this system. Specific departments within the municipal sector, which we considered were the most suitable, have been selected.

Soft rubber flooring have gained in popularity over the last years. Rubber flooring al-lows cow to move more freely without slipping and improves claw and leg health. The purpose of this study was to investigate the influence of a stepwise introduktion of soft flooring on cow`s placement in cow houses with robotic milking. A case study was carried out in a herd in northern Sweden with 41 cows. Observations were made every 15 minutes between 09.00 and 16.00 concering cow placement in cu-bicles, in cubicle alley, in feeding alley and in feeding alley with the head through feed-ing gate. One observation period was carried out per flooring alternativ: 1) all concrete slatted floor, 2) rubber slatted floor in feeding alley and concrete slatted floor in cubicle alley and 3) rubber slatted floors in feeding alley and solid rubber floors in cubicle alley. The study showed that 6 %-units fewer cows lay in the cubicles when the feeding alley surface was slatted rubber.

Pigs are often mentioned as relatively intelligent animals when compared to other nonhuman species. Despite this knowledge, the vast majority of pigs are kept under conditions that lack opportunities to satisfy their cognitive needs. Therefore, a need to evaluate the present scientific studies about pig cognition was acknowledged, in order to evaluate to what extent the knowledge is applied in the husbandry of finishing pigs. If a considerable lack of application was determined, suggestions about how to use the obtained information to improve pig welfare were also to be made. A synthesis of the present literature was made, and it could be concluded that a considerable amount of studies had been carried out in the present area. The pigs of today appear to have the same behavioural and cognitive needs as their ancestor, the wild boar.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

Detta examensarbete är genererat på egen hand av projektets deltagare. Arbetet avser att frambringa ett förslag på hur en offentlig laddare kan utformas med kartläggning av dess teknik. Produkten riktar sig främst för laddning av mobiltelefoner men ska också fungera till andra energiförsörjande portabla enheter som, mindre datorer, musikspelare samt kameror.Examensarbetet är inom området, produkt- och processutveckling vid institutionen Innovation Design och Produktutveckling på Mälardalens högskola.Projektet omfattar en förstudie med analyser av befintliga produkter på marknaden gällande design, teknik och funktion. Förstudien omfattar också resultatet av en personundersökning för att utforska om det finns ett behov av en sådan produkt på den svenska marknaden samt för att ge inspiration hur den kan utformas. Vi har också tagit del av lämpliga litteraturstudier för att skapa en trovärdighet till läsaren och som stöd för vårt arbete.Med denna förstudie i beaktning inleddes en konceptutveckling med ett omfattande skissarbete som sedan fördes över till cad-modeller med hjälp av programmet Solid Works.

The aim of this Bachelor?s thesis is to obtain understanding and knowledge about how literary scholars collaborate regarding information. Seven scholars have been studied in the aim to find out social and cultural elements which create particular prerequisites for their practice, with focus on information sharing. The method used has consisted of semi-structured interviews. The informants have been studied from a socio cultural and domain analysis starting point, which means that they are studied in the light of being members in their practice.

The Master of Science in Energy Systems Engineering program at Uppsala University started in 2000 and 221 students has graduated since. This master thesis aims to answer what competencies alumni considers most important for successful professional practice. It also seeks to find out how these competencies are reflected in the program to identify potential gaps between importance and how the competencies are being prepared. With inspiration from similar research a method has been developed consisting of two steps: (1) A survey and (2) interviews with alumni. The alumni survey rates the professional importance of 13 competencies and how well the corresponding competency is prepared in the program.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

Guideline AB är inom flugfiskebranschen ett av de största varumärkena i norden. De har även stora marknadsandelar i övriga Europa. Guideline utvecklar och säljer allt ifrån flugfiskespön och rullar till kläder och fluorcarbon tafsar. För att hänga med i konkurrensen och för att kunna erbjuda kunderna de senaste och bästa produkterna krävs ständig utveckling av nya produkter. En produkt som det ställs stora krav på både vad det gäller funktionalitet och design, är deras flugfiskerullar.

This essay aims to explain the fluctuations in the Swedish transition rate to higher education between 1923 and 2002. With theories of human capital, and screening, as points of departure, seven variables are selected and their correlation with the transition rate investigated by use of graphs and tables. The variables are unemployment, youth unemployment, the supply of academics, cohort size, number of high school graduates from programs preparing for ensuing studies, relative wage trends for worker categories with differing levels of education, and structural phase. Results show that no single variable nor the theories of human capital or screening can explain the fluctuations in transition rate in full. Instead I propose a theoretic model which amalgamates the above and places risk aversion as the driving force behind the individual?s educational decision.

When it comes to political representation, all over the world women almost always make up a minority of representatives in the legislative bodies. The Scandinavian countries in general and Sweden in particular have though been exceptions to this rule with, when compared to other countries, a rather high percentage of women in elected positions. This development took off in the seventies: during that decade the unit percentage of women in the Swedish Riksdag rose by double!The aim for this thesis is to analyse what underlying ideas influenced this advance. The focus is on three different female party federations, who are believed to have had a great impact on this increase of women politicians through their influence in their own mother parties. The federations analysed are the ones connected to the Social Democratic Party, the Centre Party and the Liberal party.