I en värld där kraven på flexibilitet, säkerhet och hårdvaruoptimering är nyckelfaktorer när det kommer till att välja IT-miljöer för företag blir virtuella skrivbord mer och mer poulära. Med dessa miljöer finns det också problem när det kommer till användarupplevelsen om nätverket ifråga inte kan uppfylla de krav som ett sådant system ställer. I detta arbete undersöks implikationerna vissa nätverksvariabler kan ha för en Virtual Desktop-infrastruktur, VDI. För att belysa dessa problem har två tester utförts på en VDI miljö. Det första testet gick ut på att mäta latensen då skrivbordsmiljön renderades för klienten från virtualiseringsservern vid olika nätverksdiamterar.

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

  Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

When designing roads it?s important to knowwhat loads will bedriven on it. The axles on heavy vehicles can either have super single tires ordual tires which, according to studies, damage the roads differently. The SwedishTransport Administration is developing an understanding for the character ofthese different kinds of axle and tire types on the loads induced on Swedishroads. In this thesis a field study was conducted to determine the distributionbetween axles with super single tires and axles with dual tires on heavy vehicles.A highway, a country road and a national road were investigated during thestudy.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

Denna rapport är en del av ett examensarbete på avdelningen för "Byggteknik och design" med inriktning "husbyggnad, projektering och konstruktion" på Kungliga Tekniska högskolan i Stockholm, Sverige.Rapporten handlar om byggandet av ett tak för en skolbyggnad i byn Lwengo Basilla som ligger i sydöstra delarna av Demokratiska republiken Kongo. Skolprojektet finansieras av en ideell organisation i Sverige som heter "Elikia na Biso" och leds av Miza Landström. Designen och konstruktionen av skolan har tagits fram med hjälp av studenter från olika avdelningar inom Kungliga Tekniska högskolan (KTH). En grupp studenter från KTH hjälpte till att lägga grunden och väggarna i skolan. Nästa grupp av studenter skickades för att hjälpa till med byggandet av skolans tak.Denna rapport fokuserar på att dimensionera och konstruera taket på skolan med hjälp av lokala material på ett effektivt sätt.

Construction and maintenance of forest truck roads are a necessary element of industrial forestry. Payment for contracting services in this context can be done according to a number of payment models. This study will focus on the methods and consequences associated with a change of Holmen Skog?s payment model from per hour to per metric ton for ballast hauling. The aim of this study is to improve the economic efficiency of Holmen Skog?s ballast hauling in construction and maintenance of forest truck roads. This is done by formulating and evaluating a proposal for a payment model based on crowns per ton.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

Native spider silk is an attractive lightweight natural polymeric material with a unique combination of strength, extendibility and flexibility. Synthetic, recombinant spider silk is an attractive biomaterial with several possible fields of application. When a foreign material is introduced to blood, this can for example cause unwanted coagulation and complement activation. The aim of this study was to investigate if coatings of heparin or albumin could improve the blood compatibility of films of recombinant spider silk and to develop an initial method to do so. Hypothetically, objects like pacemakers, stents and dental implants could be covered with spider silk films of high blood compatibility to reduce potentially harmful foreign body reactions caused by the immune defense. Increased blood compatibility would likely lead to improvements for both the individual patients and the society thanks to reduced load on healthcare institutions. Our objective was to assess the blood compatibility of both functionalized and non-functionalized recombinant spider silk by evaluating coagulation and activation of the complement system of the immune defense. Coagulation was evaluated visually on glass slides and complement activation was analyzed by measuring the concentration of the complement system mediator C3a in blood samples that had been exposed to the different materials. This study introduces a non-toxic and easy performed method of improving the blood compatibility of recombinant spider silk films by adding a heparin coating. Heparin coated surfaces had statistically significantly higher blood compatibility than uncoated surfaces. The effects of albumin coating of films were less clear compared to the results of heparin coated films. Complement activation could not be evaluated because of high activation in all samples prior contact with the materials that were included in the study..

In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

The aim of this essay was to study the nitrogen flow in two willowplantations, at different locations in the south of Sweden, that wereirrigated with sewage. The study was also performed to compare thedifferences in nitrogen flows between two years, 1998 and 1999. The studywas made in three parts. First, the denitrification activity was measuredusing the acetylen inhibition method. Second the nitrogen flow, as well asthe water- and heat flows, were modeled through the SOIL-SOILN-modelThird; the nitrogen flow was calculated to compare with the results fromthe model.The results from the measurements were then compared with the resultsfrom the SOILN-simulations to detect differences in the denitrificationrate.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The background for this degree thesis is a need to replace the existing seal used to protect equipment containing secret or sensitive equipment used by Swedish Defence. The target design should satisfy both the need for tamper evidence and reduce Life Cycle Cost. In developing a new design for a seal, additional benefits such as improved logistics support and indication of attack methods such as heat and solvents have been considered.The lack of guiding principles for end users of seals became evident during the interviews. Major concerns for the future are education of users, information about actions if a seal is broken and user liability.The design work was divided into several phases. A feasibility study was performed including investigation of theory of labels, materials and possible technologies.