This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

I det här examensarbetet dimensioneras en solcellsanläggning med batteribank till fyra kolonistugor som kommer att vara bebodda under sommarhalvåret på Wij Trädgårdar i Ockelbo. Den förväntade elanvändningen beräknas för två olika brukarbeteenden. Ett brukarbeteende där hushållsapparater med höga effekter (exempelvis mikrovågsugn) förväntas ha kortare drifttider vilket resulterar i lägre krav på installerad solcellseffekt samt en mindre batteribank.För den kemiska energilagringen i en batteribank undersöks flera olika typer av uppladdningsbara batterier. AGM blyackumulatorn är det batteri som anses vara lämpligt för kemisk energilagring i solcellssystemet och som har använts vid dimensioneringen av batteribanken. Vidare undersöks möjligheterna att lagra elektricitet småskaligt genom pumpat vatten till ett vattenmagasin, som ett komplement till energilagringen i batteribanken.

This thesis has been performed at Uddeholms AB with the purpose to investigate theparameters affecting the formation of inclusions during the manufacturing of a low carbonmanganese-steel.A follow-up, steel and slag sampling and evaluations in microscope have been done for a totalof five heats.The results for each heat have been evaluated in relation to the theory from the literaturesurvey and suggestions for changes in the process to reduce the amount of inclusions whichhave a negative effect on the steel quality have been given.The project extends over a large process where many parameters affect the formation ofinclusions. However, a tendency that a higher addition of alloys seems to increase the totalamount of inclusions before and after the vacuum degassing is seen.The majority of the studied inclusions seem to approach the composition of the top slag aftervacuum degassing. Ladle glaze may cause the inclusions which had a different compositioncompared to that of the slag.A high or low ladleage together with a high argon flow during vacuum degassing seems todissolve particles from the refractory which later on get trapped inside the inclusions.The floatation for two heats has been studied where a short floatation seems to give a higheramount of inclusions in casted material.In machined material so called stringers were found. The main composition of those stringerswas pure alumina. Inclusions with a composition of pure alumina were not found in the liquidsteel, thus the pure alumina inclusions must be formed during the casting.

This thesis has been done on a haulage contractor company named GP-Last (AB Gustav Perssons Åkeri) and the purpose with the paper was to analyse their traffic from Malmö to Stockholm and leave suggestions on efforts that GP-Last can use to increase their level of transportation quality. This has been done with two main questions, which problem do they have today and which efforts they need to do to solve their problems? Through a case study with interviews as method to collect data it showed that GP-Last had four main problems.        Not enough information about their freights. The transport planning unit in Malmö doesn?t have the exact delivery address when GP-Last begins to bring in the gods.        There are no clear routes.

The overall aim is to examine how the European Union Water Framework Directive has affected the local water management in the catchment Märstaån situated in the eastern part of the lake Mälaren river basin, Sweden. The first part of the study gives an historical overview of the area with focus on how the old agricultural landscape was handling the nutrient load from farming activities by means of different kinds of wetlands. By using the concept of the procedural landscape, introduced by Torsten Hägerstrand , together with historical maps with dates starting from the 17th century, the pre-modern landscape is analyzed.  The second part is an investigation, based on qualitative data, on how the different actors in the catchment area work together to secure the water quality for the Märstaån river. The analysis shows that the Märstaån catchment river systems are mostly unchanged in the rural areas.  The exception is the mainstream section of the Märstaån river running partly underground today and the Halmsjöbäcken river that is heavily affected by the Arlanda airport situated within the catchment area.

This study has been carried out in the spring of 2014 on behalf of PQR Consult AB in Stockholm. The aim of the study has been to analyse the energy usage of the building Skarpövägen 1 in order to explore the possibilites of saving energy by using appropriate equipment. These possible solutions have been simulated by using the programe IDA Indoor Climate and Energy, combined with a life cycle cost analysis. The laundry building, Skarövägen 23, has also been analysed due to its high amount of energy usage. The result of the energy analysis showed that the energy usage was much higher than the energy declaration.

 Why is it that we still live in a society where an individual's social background plays such a big part in their chances of reaching a higher education? Despite the numerous educational policy reforms, especially in Sweden, it still seems that an individual's career choices are pretty much related to what kind of social class they grew up in. Sociologist Pierre Bourdieu claimed that social class is reproduced in the school system, and that students from the lower classes are much less likely to reach a further education than students from the middle or upper classes due to injustice in the school system. One thing that plays a big part in this "Catch-22" situation is the concept that Bourdieu calls habitus. Habitus could be explained as an individual's taste, knowledge, ability to master the spoken language, etc. Your habitus is manifested in the choices you make, the music you listen to, how you dress and the way you speak, and it determines your relation to the education system and life in general. As part of my essay, I wanted to interview students from lower or working class at my school, Konstfack, to see if they have had any negative or positive experiences from their encounter with a higher education. And if so, could they be linked directly to their social background? As a reaction to my own and my interviewees? experiences and frustration, I use the concept of habitus in my practical work.

The purpose of this work is to study a circulation project in Enköping municipality, where the society?s rest products are used to make beneficial products. In Enköping the rest products from waste treatment plants and private sewers are used to fertilize and irrigate Salix plantations that later are harvested and burned at the local combined heating and power plant, ENA Energy AB, to produce electricity and heat. Possibilities to apply this kind of project ona municipality in Russia are also explored.Guryevsk municipality in Kaliningrad region was chosen since there is a need to improve energy systems and reduce emissions to water and air. This municipality strives to become environmentally friendly.

The purpose of our paper was to understand the motivators that kept the social workers within the profession. Social workers' have a profession that, to the greatest extent, means high working load and difficult problematic issues. On the basis of this starting point we asked us why so many social workers still choose to remain within the profession for several years. The purpose of our paper is to understand what motivates the social workers to stay within their profession. To understand which are the motivators, we decided to use the theory salutogeent perspective with Aaron Antonvsky's sense of coherence.

AimThe purpose of this study is to investigate whether there is scientific evidence that exercise and/or manual therapy can improve function, in terms of increased mobility and strength on shoulder impingement-like symptoms among athletes. Another aim is to investigate whether these interventions can reduce shoulder pain.MethodA systematic review was conducted in the databases PubMed, CINAHL, PEDro and Amed. A total of thirteen articles were selected for further review and compilation. They were then graded for level of evidence according to the PEDro scale and the Swedish Council on Technology Assessment (SBU).ResultsThe systematic review shows that there is strong scientific evidence that acupuncture and heat can reduce pain in athletes diagnosed with supraspinatus-tendiopathy. There is limited scientific evidence that exercise increases strength, limited scientific evidence that stretching increases mobility and insufficient scientific evidence that a combination of treatments, with both exercise and stretching, reduces pain and increases function in overhead athletes.ConclusionsExercise and manual therapy can reduce pain and/or improve function in terms of increased mobility and strength in athletes with shoulder impingement-like symptoms.

With the increasing costs in concentrate the importance in producing ensilage with a high quality is becoming more and more important. To succeed with this goal it is of importance not only to harvest in the right period, but also to be able to store the ensilage without a decrease in quality and nutrional values. To maintain a good ensilage the covering of the ensilage must be carefully made. An unsuccessful covering causes mould to grow in the ensilage, which both increases the work load and also increases the amount of feed which is wasted. A bigger amount of spoiled feed also increases the risk of feeding spoiled feed to the cattle.

Inom Radiostyrd Bilsport tävlas det med ett antal olika klasser som drivs av 2-taktsförbränningsmotorer. Dessa blir mycket varma och måste kylas av. Det sker med hjälp av enkylfläns som är monterad ovanpå förbränningsrummet, och som kyls av fartvinden.HP Hobbyprodukter har frågat oss om vi kan hjälpa dem att ta fram en egen kylfläns åt dem.Eftersom det ofta förekommer ovarsam behandling i tävlingssammanhang, är det ett krav attkylflänsens ska tåla detta. Den måste även avleda värme från förbränningsrummet, motorblocketoch övriga motorkomponenter effektivt. Ett önskemål är att kylflänsen ska ha ett unikt utseende,så att den är lätt att känna igen ute på banan.Arbetet har inriktat sig på prototypnivå.

To achieve a sustainable development, three aspects have to take equal place in the society; environmental, economical and social. To reduce the impact on the environment and the amount of greenhouse gases supplied to the atmosphere, industrialized countries and less developed countries must start cooperating. Also the use of renewable energy sources, like solar, hydro and wind power, have to increase.Wind power has great potential as a future energy supply. It is cost efficient, quickly developed and the resource is abundant and available worldwide.Examinations made in Sweden, indicates that there are difficulties establishing wind power at the same pace as the environmental goals, set by the Swedish government, requires. Mainly because people living nearby potential areas for wind power farms, appeal against the decision.This study aims to investigate differences between how people in Sweden and Brazil look at wind power as a future energy source and at the establishing process.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.