Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

The purpose is to understand the planning process for residential buildings and toinvestigate the consequences of the choices made in the process. The project will alsoprovide broader knowledge in the design and development under the current law andpractice.The goal is to present a proposal on how a city near the site where water can bedesigned from a sustainable perspective. How can a residential neighborhood be anenvironmentally sound and sustainable region? New systems and techniques havebeen presented previously in terms of sustainable environments and these are intendedof being used in the project Quarter Water-mirror.The project has been implemented on the computer program ArchiCAD in whichdrawings and visualizations have been carried out. These drawings are included asannexes to the report.For information, calculations and drawings, laws for physical planning and Swedishstandard have been followed.Residential buildings have been designed on a site, which is 2, 5 hectares.

Global warming is a huge issue that humans have contributed to through over-exploitation of natural resources and extensive usage of fossil fuels. Now more than ever, we need to embrace a recycle thinking and reuse our waste, for example through producing biogas from our food waste. The purpose of this report was therefore to identify the energy usage and emissions resulting from the biogas chain which spans from Solna Stad to Uppsala Vatten. Furthermore, potential efficiency improvements were to be identified and proposed. This report focused mainly on the first part of the biogas chain that includes the collection of the food waste and the reloading process.

The horse is a homeothermic animal and to keep a constant body temperature in winter season is important. Acclimatisation is to provide means for a good thermal insulation consisting of skin, hair, and an outer air layer. The skin covers the horses body and it is composed of three main layers where the top layer of the epidermis consists of dead keratinized cells that are constantly being sheed. The dermis is composed of collagen connective tissue that give the skin its strength. The bottom layer with subcutaneous fat provides a thermal insulation and can be used as an energy reserve in cold weather.

This study investigates the relation between cyberbullying and traditional bullying (in school). In previous research it has been argued that one should separate cyberbullying and traditional bullying both in definitional and measurements issues. However, in Swedish school, there are no marked differences between the two forms of bullying, teachers are responsible to prevent them both. The research is based on 3925 students in years 3-9 (1950 girls and 1975 boys) in 19 schools in the Gothenburg region and two from the Stockholm region. The students have taken a digital survey at school, regarding both traditional and cyber bullying.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

The aim of this report is to give a description of a diploma work of 20 points that has been performed during the spring 2006 at Ericsson AB in Borås. The report accounts for the problem and procedure during the diploma work. The software used for this project was embedded in a radio link. The RAM in this radio link was divided into several regions where two were used for memory allocation. The current allocation of memory in the radio link was not optimized with regards to performance, security and memory use and the configuration used made it difficult to determine the memory use of the system and the actual memory need.

Volvo Trucks is the second largest manufacturer of heavy trucks, with factories in several countries and with around 21 000 employees. At the plant in Tuve, trucks have been built since 1982 and the activity mainly consists of producing side members and to assemble and packing kits of trucks. In 2005, the factory in Tuve launched the ambition to be the first carbon dioxide neutral vehicle factory in the world. This will be implemented by streamlining and investing in renewable energy. The aim of this degree thesis is to map the usage of energy within production, and also to prepare a method to measure key figures (use of energy per produced unit).

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

This report summarizes the development of a calculation program estimating the profitability of converting a peak-load oil-fired boiler to pellets. To convert an oil-fired boiler to pellets a new fuel handling system must be designed. Changes also have to be made to some other components. Since there are many different techniques for transportation, storage and treatment of the fuel only the most interesting techniques from Swecos experience and interest were included in the study.The capacity of the different parts in the system was dimensioned based on the power of the boiler after conversion. To estimate prices, installed power and dimensions manufacturers and distributers were contacted.

Examensarbetet ingår i den slutliga delen av kandidatutbildningen i naturresursteknik och utgör 15 högskolepoäng. Utbildningen är inriktad mot geologi och det avslutande arbetet ska ha anknytning till ämnet. Under våren 2012 presenterade representanter för LKAB förslaget att basera examensarbetet på att dokumentera hållfastheten hos bergarter från Kiirunavaaras liggvägg med hjälp av punktlasttestning. Tidigare undersökningar av hållfastheten hos bergarterna i Kiirunavaara har främst gjorts genom enaxiella tryckhållfasthetsmätningar. Det finns ett behov av att undersöka hållfastheten hos bergarterna i Kiirunavaara då gruvbrytningen sker djupare ned i jordskorpan och kraven på säkerheten ständigt ökar.

The purpose of this study is to examine how risk is perceived by the urban architect's in the region Dalarna, as well as how this is reflected in their everyday work with risk and decision- making according to urban planning. The ambition is also to show how their risk awareness could be improved. The study is written in cooperation with Länsstyrelsen Dalarna as a part of their regional long-term goal to improve the region's proactive risk' and crisis management. The study is based upon 12 semi-structured interviews with local urban architects conducted during the summer and autumn 2007. The result shows that some architects are motivated for working with risk and think that risk awareness should be integrated in their everyday work, while others are not motivated and think that risk is more of a passing trend.

Energy and environmental demands regarding buildings have become an increasinglydiscussed topic, both in Sweden and in Europe as a whole. The general trend indicatesthat greater efforts are being put into the energy efficiency of the built environment.There are already numerous examples of houses with a low energy demand, and thenumber of low energy buildings is constantly growing.At the time being, the maximum level for energy demands for housing in Stockholm is110 kWh/m2year, but as soon as next year the limit will be changed to 90. The Swedishagency Energimyndigheten is currently conducting a project to interpret the EU Directiveon the so-called Nearly zero energy buildings, and the preliminary results indicate thatthe level of requirements for purchased energy will end up with about 55 kWh / m2year,which is in line withtoday?s recommendationsfound in FEBY's Kravspecifikation förPassivhus.Starting with a low-energy house in Henriksdalshamnen in Stockholm, we have analyzedvarious energy-efficiency measures and their influence on power and energy needs. Thefinancial aspects associated with the measures have been studied using a model of lifecycle costs.The measures were initially studied individually to give an idea of how much impact theyeach had.

Mitt examensarbete innefattar en fönsterutredning för radhusområdet Skeppsvägen i Bålsta. Fastighetsägare är Håbohus AB och examensarbetet har skrivits för Skanska Sverige AB. Arbetet har skrivits på plats i Bålsta där Skanska Direkt AB har eget kontor och erhåller idag totalentreprenaden för renovering av Skeppsvägen. Arbetets syfte är att klart och tydligt redovisa eventuell effekt och energibesparing vid byte av befintliga fönster och altandörrar.Undersökning av fönster och altandörrar har gjorts okulärt, med värmekamera och med fuktkvotsmätare. Vid den okulära besiktningen noterades färgsläpp på fönster.