Many of todays studies show that district heating is one of the betteralternatives as heating source because of its low environmental load.The energy source is often leftovers from other processes producing energy or waste, like garbage or chips.Electricity in combination with geothermal heating is another heating system that has increased sharply during the last years, and also this system decreases the discharges that have negative affectson the environment compared to several other heating methods.This report aims to, concentrated towards these two different heating systems, estimate the amounts of discharges they indirect cause and how the environment is affected.We have calculated the mean value for discharges of carbon dioxide, nitrogen oxide, sulphur oxide and dust generated from electrical power used in Sweden.Through interviews and research we have gained data for the same substances that district heating based on combustion of garbage and biofuel generates.We have also in cooperation with a housing company chosen a building we see representative for many of the new single-family houses built in Sweden today.Based on its shape and appearance we theoretically created three alternatives of the same house, each of them with climate screens different from each other.Together with the amounts of discharged environmental affecting substances, these houses were the base for our calculations and studies when investigating the different heating sources environmental effect.The results have thereafter been analyzed and discussed from different angles..

?Boverket? the Design Regulations in Sweden, also called BKR has for a long timebeen the mandatory standard that has guided and regulated construction design. Butat the end of 2010 BKR was replaced with Eurocode. This report deals with thecomparison of these two standards when it comes to wood construction. Duringwinter 2009/2010 there were many roof collapses due to excessive loads on theroofs across Sweden.

A common perception is that fungicide treatments increases yield, but that the nitrogen of the particular grain is diluted so that the overall removal of grain nitrogen from the field remains unchanged. The aim of this paper is to demonstrate that a healthy crop reduces the risk of nutrient loss from agricultural land. The results from genotype and plant protection trials often show constant nitrogen content in the grain, although the yield has been increased. Results from such experiments are therefore processed in order to confirm this and show that it is no statistically significant difference between the protein content (and also nitrogen content) in crops which have undergone fungicide treatment compared to crops which remained untreated. The trials processed have been carried out in the southernmost part of Sweden and are distinguished to concern winter wheat production.The explanation to the results is that a healthy crop is able to maintain the biological functions of the plant in a more efficient way than a crop damaged by a fungal infection.

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

AbstractNowadays, companies and organizations manage large amounts of data to be used as support in decision making. A good solution for data management is in the form of data warehouses. A data warehouse is used to gather information from multiple sources within a company and arrange the information in a way that makes it easy to retrieve and analyze. Designing a data warehouse is not a simple task. The study herein will focus on what a data warehouse is and how the ETL process is used for data storage in the data warehouse. ETL stands for Extract, Transform and Load and is the process that retrieves data, transforms it and finally loads it into the data warehouse.

At Forsmark nuclear power plant the rather old-fashioned software COPTA is used in containment safety analysis. There exists a desire within the organisation to introduce a more modern software with ability to more detailed modeling and increased usability.The goal of this thesis was to evaluate the software APROS in containment safety analysis. APROS models describing one of the containments at Forsmark NPP have been developed. Two simulations of typical containment incidents, one of them a large pipe break, have been made where containment safety parameters such as pressure and temperature are studied. Results are analyzed and verified against results from corresponding COPTA models.

Bakgrund: Vårdplatserna på svenska sjukhus har minskat drastiskt det senaste decenniet.  Detta har inneburit en högre beläggning på de kvarvarande och medfört längre väntetid på landets akutmottagningar. Platsbristen skapar, ibland dagliga, överbeläggningar och utlokaliseringar av patienter.Syfte: Att undersöka hur sjuksköterskor och läkare upplever att vårdplatssituationen påverkar deras arbete och vad detta får för konsekvenser för patienterna.Metod: Kvalitativ design med semistrukturerade intervjuer med tre läkare och nio sjuksköterskor från akutvårdsavdelning med inriktning infektion, mottagning med akutintag och akutmottagning. Analysarbetet genomfördes med Malteruds (2009) innehållsanalys. Resultat: Vårdplatssituationen kommer sig av en brist på vårdplatser inom främst medicindivisionen, samt en oförmåga att hålla de platser som finns öppna på grund av sjuksköterskebrist. Bristen på vårdplatser har inneburit en oförmåga för läkare och sjuksköterskor att utföra sitt arbete i enlighet med sin kompetens och beprövad erfarenhet.Slutsats: Svårigheterna med att finna platser till patienterna på deras hemavdelningar samt de ständiga omflyttningarna av patienter medför svårigheter för vårdpersonalen att ge god medicinsk vård och omvårdnad vilket medför stora risker för patientsäkerheten.

Commissioned for this report is Ramboll, Bridge and Tunnel Unit in Stockholm. Theidea throughout the work has been to primarily help bridge designers compilingadvice and instructions on how fatigue verification for railway bridges in reinforcedconcrete shall be performed under the new rules, the Eurocodes.After the introduction of the Eurocodes in 2011 has major problems emerged amongdesigners around Sweden. In some areas, it differs in the calculation rules comparedwith rules from the Swedish Transport Administration and the National Board ofHousing, Building and Planning calculation. Fatigue verification is one area where thenew calculation rules are different from the past.A large part of the report has been to interpret and find the relevant information inthe Eurocodes concerning fatigue. When questions or doubts have surfaced, this hasbeen discussed with Elisabeth Helsing at the Swedish Transport Administration andbridge designers at Ramboll.The result is a report where the structure is organized in the way that the bridgedesigners can move from cover to cover and realize that fatigue verification in realityfollows the same order as the report's sections.

Swedish biogas is currently produced mainly by anaerobic digestion of sewage sludgeat sewage treatment plants, landfills and anaerobic digestion of household or industrialwaste. Also cattle ma-nure from farms can be used to produce biogas. Upgradingbiogas represents an increase in methane concentration from about 65 % to about 97%. In addition, particles and contaminants must be sepa-rated from the upgradedbiogas. There are various methods for upgrading and this report compares sixdifferent methods with respect to environment and economy: water scrubber,Biosling, cryo technology, chemical absorption, Pressure Swing Adsorption (PSA) andmembrane separation.According to the used ORWARE model, chemical adsorption with amine has the leastenvironmen-tal impact (methane emissions) and the lowest costs.

One of the most commonly used methods for analysis of polyphenols is the Folin-Ciocalteu (FC) method, where the FC reagent has been reported to interfere with some substances in fruit juices. The interfering substance that is present in the highest amount in most fruit juices is ascorbic acid. In this study, the total phenolic content (TPC) of three fruit juices was analysed by the FC method as well as with an enzymatic method with hydrogen peroxide oxidoreductase type II (HRP) for comparison. To investigate how the interfering ascorbic acid affects the TPC, juice samples were analysed after removal and addition, respectively, of ascorbic acid. The samples were analysed with HPLC both before and after the extraction phase of the FC method.

AbstractAs a developer of database-driven applications you will be faced with difficult choices, when it comes to choosing database, server and programming language. For the result to be satisfactory it requires the different techniques to interact well with each other and also fulfill performance expectations. This is even more important when the application is deployed to the cloud and the response time plays a major role.This paper evaluates different databases and their performance. To test the databases there was an application made in the server script language PHP or Hypertext Preprocessor and it was deployed to Windows Azure cloud platform. The test applications task is to call and load databases by controlled requests which creates, reads, updates and deletes data in an relatively large extent.The results shows that locale databases or databases in the same data center as the server generates the fastest response.

Background: Pressure ulcer is a complication that arises often due to a lowered general condition. Pressure ulcer arise because of long term compressive load application. That?s why it?s of utmost importance as a nurse to work in preventive ways, as the pressure ulcer lead to physical, psychological and social consequences for the patient. Purpose: The purpose was to describe the patients experiences of living with pressure ulcer.

Detta examensarbete har genomförts i samarbete med byggteknikavdelning på Ramböll Sverige AB, i Norrköping/Linköping. På företaget finns ett behov av att förenkla arbetet med vindlastberäkningar för hallbyggnader enligt Eurokoden. Idag använder företaget en förenklad metod som överdimensionerar. För att kunna göra en mer exakt beräkning helt enligt Eurokoden och effektivisera arbetet har det i detta examensarbete skapats en beräkningsmall för detta ändamål. Beräkningsmallen har tagits fram i programmet Microsoft Excel.För att också kunna se konsekvenserna av att jobba med en förenklad metod, har det utförts en jämförelsestudie mellan två befintliga projekt på företaget.

The main purpose with the project has been to approximate the magnitude of the pollution transport from the actual road surfaces and to get an approximation of the possibility to collect the pollutants to reduce the load to the water and improve the water quality.The quantity of pollution transport from the most trafficated roads areas in Örebro city has been calculated. Roads whith a traffic exceeding 10 000 vehicle/day. The study has been done with the calculation tool StormTac. Through analysis of traffic loads and road surface, which together with a different kinds of parameters gives an approximation of the pollutant transport.The calculation has included some metals and other substances in the stormwater and has also included the present of suspended solids. Included the overall study, some smaller areas has also been calculated for the possibility to remove pollutants.The work also includes calculation for three different areas for stormwater treatment.

As a result of directives from EU, with the ambition to reach environmetal goals, The German organisation Passivhaus Institut has defined a passive house. A passive house is a building that is very energy efficient and makes a small impact on the environment. The energy from the inhabitants as well as the appliances & fixtures in the building should equal the energy that is required to heat the building. A Swedish version of the passive house definition has been defined, taking into account the climate conditions and the difference in building regulations.This thesis is a request from Skanska on how it can improve and develop an ongoing passive house project, involving an infant school. The intention of this thesis is to identify difficulties & display potential development areas for infant schools.The method of research conducted is as follows: interviews of clients, ventilation consultant, consultant for heating system and an energy calculation consultant, an inspection of the infant shcool in process, investigation of completed infant schools and a study of relevant literature.From this research it was found that it is difficult for infant schools to pass the criteria for passive houses. The conclusion of this thesis provide several guidelines on how to improve the outcome of existing projects & the steps needed to be taken for future development in this area..