The aim of this study is to illustrate, and analyze how social workers are able to more effectively pursue operative possibilities within their own particular organizations. The main question concerning this issue is: How are social workers, working within the same district organization able to realise any potential for co-operation with other social workers, in different locales and units, yet working within the same organization? Following on from this question, further issues arise such as: 1. How do the varying demands of the clients affect the workload of the social worker? 2.

In the year 2010 a transition will take place here in Sweden from the present rules how to dimension buildings in to the common rules with have been developed in Europe, the Eurocodes. Eurocode is the term for a collection standard that contains calculation rules in how to dimension constructions and buildings. They are developed by the European standardize committee.The purpose with this examination work is to get an insight of what changes this will contribute to, and how it will affect the dimensioning. Are there going to be any differences in the dimension you finally chose?To investigate these possible differences two constructions will be calculated first in the present Swedish rules, and then in the coming eurocodes.One of these two constructions will be build completely in steel, while the other will be build completely in concrete.

BACKGROUND: Chronic Obstructive Pulmonary Disease (COPD) is a slow progressive disease affecting the family caregivers by limiting their lifestyle. Subsequently the situation can be experienced as stressful for both the afflicted and the relatives. To easier understand the needs of the caregivers of family members suffering from COPD have, it is important to get an insight into their experience of every-day life, so that medical staff can help, support and promote their health according to their needs. AIM: To illustrate caregivers? experiences of living with a family member suffering from Chronic Obstructive Pulmonary Disease.

To turn the dairy heifers out on pasture is the most natural way for the cattle to get feed. At the same time it is cheap and if it is right treated a feed of high nutritive value. The problem today is to get dairy heifers to grow enough when they are grazing at natural pasture for the entire summer. Therefore, the opinions differ whether pasture is a resource or a problem. The increasing interest of pasture production is due to the fact that you can receive grants for preserving valuable natural assets and cultural landscape elements in the pasture land. A high grazing pressure is necessary to preserve an open landscape and a great variety of species. In the same time the heifers have to supply their nutritive needs in order to grow and be large enough to show heat and be pregnant in right time to calve with a sufficient body size and at an economically right age. This paper includes a literature review on natural pasture, pasture production, and growth of dairy heifers together with own interviews with dairy farmers about their point of view to the pasture husbandry on the farms, how they plan for pasture, look after natural pasture, treatment areas and take care of the calves and heifers. The results indicate that the time it takes and the demanded work are the biggest factors to how and why the farmers do as they do..

Energy efficiency has become a very topical issue that has been discussed throughout the European Union for preventing negative environmental impacts that have been associated with the consumption of energy. In the residential sector have mainly municipalities set strict requirements for the reduction of energy consumption while the renewable energy has been asked. Different concepts of low-energy buildings have been developed to reduce the cost of operation and maintenance in existing buildings such as in new ones.This thesis has aimed to minimize the energy cost of a large building which has had low energy consumption features originally. Energy reviews has been initiated in order to be able for showing how the house electricity could be carried out even more efficiently.The work was initiated through a literature study to clearly increase the reliability on the energy subject. Different concepts of low-energy buildings have been treated in connection with its specifications, afterward those have been compared with the obtained results.

In this study, 29 calves were dehorned by heat cauterisation at the age of 1 to 8 weeks. Before the procedure, the calves were given local anaesthetic but were not sedated. In connection with the dehorning, 14 calves were given the non-steroidal anti-inflammatory drug (NSAID) meloxicam and 15 calves were given placebo. During the following three days behavioural studies were performed to investigate if the different treatments had any effect on the calves´ postoperative behaviour. Head shakes, head rubs, kicks and ear flicks were studied, as earlier studies have shown that an increase in these behavioural patterns suggests postoperative pain.

The aim of this project was to look into ten small sewer systems in the municipality of Laholm, in Sweden, in order to work out common assessment grounds for them. The sizes of the systems for purification of wastewater were within the range of 25 to 2000 population equivalents. Our method was to study literature, the laws and regulations applicable and the files at the municipality. The conclusion is that every sewer system is different and every situation is unique. We concluded that based on laws and assessment grounds sewer systems equal in size and pollution load ought to have similar demands attached to them.

An increase interest of new methods and tools has begun to grow in the real estate business, this new trend causes an increase in new programs that aim to simplify processes of energy-efficiency and environmental issues.After consulting with Björn Alsmark from Bjerking AB, an architect and engineering company, we made a decision that the Degree Project is going to examine the program IES (Integrated Environmental Solutions) with some integrations from Revit Architecture application.To be able to examine IES, we got access to a completed project from Bjerking. The project is a nursery school in Uppsala. An application has been handed in from Bjerking to make this project to a Green Building-certificated project. According to Bjerking own calculations (with the energy-calculation program Enorm), the consumption of energy of the nursery school is 48 percent lesser than required by BBR.An evaluation of IES and Enorm has been made with an aim to compare these two programs and find out if IES is an appropriate program to replace Enorm. Does Enorm or IES come up to BBR´s recommendations?The Degree Project cover 15 ECT, that required several adjusting and delimitations, and the study sketch ended with a literature study.After finishing the study sketch the modeling of the nursery school began.

The purpose of the project was to exam steams ability to sterilize carrots infected withLactobacillus plantarum. The project was a cowork with Brämhults Juice AB. They hadobserved an increase of Lactobacillus in the production of carrot juice during the summer. Tokeep the flavour of fresh fruits, the juice is treated carefully with heat. This means that thejuice only stays fresh for a few days, around two weeks for an unopened package and threedays for an opened package.In an attempt to remove the remaining Lactobacillus of the carrots, steam is tested as an extrastep in the production of juice.

Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

The purpose of this work has been to explore what ecosystem services a small green area in an urban environment can offer and whether specific trees can be used to maximize regulatory ecosystem services in a cultural-historical environment. Additionally, it investigates whether there is any difference in ecosystem services depending on whether these trees, or trees that better fit into the cultural-historical environment, are used. Through simulations and comparisons with existing trees in Pommerska tomten, Mariestad, Sweden, a pocket park within a national interest area, different hypothetical tree planting options are analyzed and evaluated. To measure ecosystem services, the website My-Tree, developed by the US equivalent of the Department of Agriculture, was used. By inputting data about the tree, such as location, species, vitality, stem diameter, and solar exposure, My-Tree calculates some of the ecosystem services the tree provides.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

By using modern methods of casting concrete, cast in place can get more effective and industrialized. A modern method is self compacting concrete. By using this type of concrete, advantages like improved working environment and rationalized construction can be reached. Because the concrete doesn?t need to be vibrated, the amount of staff on site and the noise can be reduced.

The purpose of this study was to investigate women's experiences of pain, bleeding,to discover the fetus, hospitalization associated with medical abortion at home and toexplore differences in experiences between different groups of women, as age orprevious childbirth. The study was conducted at two gynecological clinics in Uppsalaand in Stockholm. A questionnaire was distributed and analyzed using a quantitativeanalysis method. The response rate was 30 %. Most women were satisfied with thepain relief given to them from the hospital.

The use of transrectal ultrasonography of the uterus is a fairly new method for early pregnancy diagnosis. In the present study 40 cows and 10 heifers were examined 16, 19, 22 and 25 days after artificial insemination to decide on what day an accurate pregnancy diagnosis could be made under field conditions. A 5 and 7,5 MHz transducer were used in all examinations in order to determine wheter one of them was better for the present purpose. The animals were also examined for clinical signs of oestrus. The results shows that an accurate pregnancy diagnosis "not pregnant" was easier to make on day 22 than on day 25 since most of the not pregnant cows then were in heat.