Sök:

Sökresultat:

1073 Uppsatser om Solar heat load - Sida 34 av 72

Tidsberoende kvantkemiska beräkningar av optisk absorption hos polymerer och molekyler med litet bandgap

The vertical electronic excitation energies for the narrow-bandgap polymers LBPF, EP37 and EP62 have been calculated using Density Functional Theory (DFT). Also the vertical excitation energies for the acceptor unit of LBPF have been calculated using the Hartree-Fock (HF), DFT and Coupled Cluster (CC) methods. The calculations cover the visible and infrared wave length region and two strong transitions are obtained, one corresponding to the pi to pi* transition and one corresponding to the pi to Acceptor transition. The excitation energies obtained from DFT are below the corresponding experimental results and attempts have therefore been made to perform bench-marking calculations using a hierarchy of CC methods..

Provning av ythärdade material tänkta för
transmissionsdetaljer

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.

Kaffesump som substrat i biogasanläggningar eller som bränsle i fjärrvärmeverk : en studie av effekter på växthusgasutsläpp och kostnader

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

Statuskontroll av Paradisskolans elektriska belastning

In this thesis is studied the electrical load of Paradisskolan with respect to power quality and energy consumption. The school's owner Trollhättans Tomt AB is also interested to know if they can reduce their costs by changing to smaller meter fuses. A recurring ground fault that?s been recorded from powerpanel A1A has been investigated. The school's equipped with an electrical bonding system, harmonic filters for the third harmonic currents, TN-S system from feeding transformer and groundfault monitoring.

Laborationsmätning av vindtäthetens betydelse för en väggs U-värde

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

Uppfattningar om tryckved bland träbearbetande företag i Sverige :

The primary purpose of this study has been to investigate the Swedish timber industry?s perception of compression wood. A secondary aim has been to describe particular areas within the production process where compression wood is likely to cause problems. This study has mainly been carried out as a questionnaire. In order to connect the findings to current research, additional information has also been collected by means of a literature review. The questionnaire has been intended for sawmills and wood-manufacturing companies from various production classes and owner categories, as well as from different parts of the country.

Optimering av sotningsfrekvens i biobränsleeldad CFB-panna : panna 5, Mälarenergi AB, Västerås

During the past 30 years the fuels for energy production in heating and power plants have changed. Fossil fuels have decreased in usage whereas bio fuels in Sweden have increased with 60% since the 1970's. Different fuels affects combustion and the release of various substances and particles into the flue gas. This is caused by the diverse components and chemical structures of fossil fuels and bio fuels. When the flue gas leave the combustion chamber and enters the path to the chimney particles in the gas are being transported out of the combustion chamber.

Konstruktion av patientsimulator för anestesimaskiner

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

Gårdsbaserade system för spannmålshantering i den framtida Lantmännenorganisationen :

The Swedish cooperative Lantmännen Ekonomiska Förening has initiated a project labelled "Operation Blåljus" that includes an extensive program for closing down elevators. The number of elevators will be reduced from 92 to approximately 15 after harvest of 2007. The objective of Blåljus is to increase the price of grain with 10 öre/kg. A project has been initiated at the Lantmännen Grain division where the purpose is to provide the farmers with support in their decisions and practical advice how they can load a 35 ton grain truck on 30 minutes. The result from the project will serve as a support system to the farmer in his ambition to achieve cost efficient systems to load a truck with grain on the farm.

Studie av verkningsgrad potentialen för ett vatten baserat Waste Heat Recovery system med kolvexpander

SammanfattningEn ånganna monterades i EGR (Exhaust Gas Recirculation) slingan på en 12,7 liters Scania Euro V motor (DC1306). En modell som beskriver Rankine cykel togs fram med vatten som köldmedium i simuleringsverktyget GT-Power. Ångpannan i GT-power modellen kalibrerades m.h.a experimentell data.Simuleringarna visade att det optimala ångtrycket, det trycket där högst effekt kan erhållas från expandern, är beroende av EGR temperaturen. Det innebär att ju högre EGR inloppstemperatur desto högre optimalt ångtryck. EGR temperaturen i punkt 2 i ESC cykeln är 514? C för denna motor, vilket resulterar i ett optimalt tryck på 120 bar enligt simuleringen.

Energivinst vid hybridisering av hydrauliskt system

Today's high oil prices and more stringent environmental requirements have led to that manufacturers of mobile construction equipment try to make their products more energy efficient. With this in mind a project about hybridization of hydraulic systems has been formed. The purpose of this project was to analyze the savings that can be achieved by hybridization of hydraulic systems. A reach stacker truck (Kalmar DRD450-80S4XS) were simulated in some load cases with conventional hydraulic systems and with three types of hybridized hydraulic systems. Different parts of the hydraulic systems were also analyzed separately.

Design av motorstyrd lyfthjälp till toalettstol

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

Metodik för fastställande av bärförmåga på befintliga betongkonstruktioner

Many buildings are now nearing the end of their service life. This applies to both the older houses from the 40's and 50's to the million project houses that did not prove to be as sustainable in the long run. Often there is a desire to extend the service lifetime, but to do that you need to make detailed inspections. The Folkets hus in Gävle is one of those buildings that is in need of renovation and to fulfill the new requirements that must be met in today's buildings. It is desired to make the buildings rentable space more attractive and to extend the building with two more floors.

Methane emission from nitrate-treated tannin rich feed for cattle in Vietnam

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.

Ord och ingen handling?

Is Försäkringskassan, one of Sweden?s largest organizations, an equal place to work in? Dosex, ethnical background or age matter when being treated by colleagues and managers?In this thesis I try to, through interviews with both the Human Resources-departement andsome administrators at Försäkringskassan, find the answers to how the organization?s internalwork regarding equality functions. To help me with the analysis I use both discourse theoryand gender theory. I find a discrepancy between the Human Resources-department?s and theadministrators? view of how the internal equality work is run.

<- Föregående sida 34 Nästa sida ->