The control of indoor temperature must be able to handle large time constants and both measureable disturbances like outdoor temperature, and non-measurable disturbances, like waste heat from appliances. Due to cheaper microcontrollers (small computers with designated tasks) with better performance, more advanced and computation-demanding methods for control can be used.In this thesis, Generalized Predictive Control (GPC) has been implemented and tested on a theoretically derived model of a house. GPC states that a model of the system is estimated in every sample, and the control is carried out simultaneously, based on predictions of the model. Disturbances like solar radiation can be estimated and used in the control as well. The control signals are determined by quadratic programming, which makes it possible to consider conditions, for example limitations on the control signals.GPC requires a number of parameters to be defined, like model order and control signal penalty, but is relatively robust for variations in them.

World Solar Challenge är en tävling i Australien vars syfte är att främja utvecklingen av förnyelsebar energi. Här deltar olika universitet runt om i världen och för att bygga en solcellsdriven bil som drivs av solens energi. Den ska sedan köras en sträcka mellan Darwin och Adelaide på dryga 300 mil genomAustralien på kortast möjligast tid. Projektet görs för Tekniska Högskolan i Jönköping till en kommande kurs somstudenter kan söka sig till för att delta i World Solar Challenge 2013. I kursen ingår att bygga en solcellsbil som man sedan tävlar med.

Turning Solar collectors, heliostats, is certainly not a new idea but has been explored for at least two decades. Projects on this subject have resulted in more or less realistic constructions, in a commercial point of view. Far too often the technical goals have had higher priority than the economical, which has resulted in a few constructions having the ability to compete with conventional, fix Solar collectors. The economical issues have been given high priority in this project, without decreasing the demands on reliability. The system has been given the following mechanical and electronical properties: One-axis movement, fix heat carrying fluid system, microcomputer controlled movement and automatic protection from overheating.

World Solar Challenge är en tävling i Australien vars syfte är att främja utvecklingen av förnyelsebar energi. Här deltar olika universitet runt om i världen och för att bygga en solcellsdriven bil som drivs av solens energi. Den ska sedan köras en sträcka mellan Darwin och Adelaide på dryga 300 mil genomAustralien på kortast möjligast tid. Projektet görs för Tekniska Högskolan i Jönköping till en kommande kurs somstudenter kan söka sig till för att delta i World Solar Challenge 2013. I kursen ingår att bygga en solcellsbil som man sedan tävlar med.

World Solar Challenge är en tävling i Australien vars syfte är att främja utvecklingen av förnyelsebar energi. Här deltar olika universitet runt om i världen och för att bygga en solcellsdriven bil som drivs av solens energi. Den ska sedan köras en sträcka mellan Darwin och Adelaide på dryga 300 mil genom Australien på kortast möjligast tid.Projektet görs för Tekniska Högskolan i Jönköping till en kommande kurs som studenter kan söka sig till för att delta i World Solar Challenge 2013. I kursen ingår att bygga en solcellsbil som man sedan tävlar med.Genom att sätta upp krav som är nödvändiga och önskvärda i en funktionsanalys får projektet en utgångspunkt och ett stöd som bestämmer hur konceptet ska se ut och vilka krav som måste uppfyllas. De restriktioner som tävlingsledningen för World Solar Challenge upprättat kan omvandlas till nödvändiga krav i funktionsanalysen.Researchen, restriktionerna och de teorier som de aerodynamiska aspekterna pekat på bestämmer hur konceptet är utformat.Resultatet i projektet är en solcellsbil som med hjälp av sin sammanhängande form får goda aerodynamiska egenskaper och kan på det sättet konkurrera om en topplacering i World Solar Challenge.

Om lusten att samla på sig saker och om lusten att visa sin samling. Att synliggöra en smak,en kunskap, ett intresse för andra. Om processer och tankar kring ett arbete där självavisningen av det insamlade materialet bildar (blir) (är) en tillgänglig rörlig samling, ett privatmobilt arkiv, ett levande nätverk. Är det en bekräftelse i sig att publiken kommer och tittareller krävs det mer? Ett samtal kring upplevelsen eller bara ett utrymme för samtal efter det upplevda..

I ett samhälle där nyskapande teknik och goda kommunikationsmöjligheter gör marknader globala blir kvalitetsutveckling ett allt mer utbrett verktyg för företag att skapa sig konkurrensfördelar. Det har visat sig att stora summor pengar spenderas för att åtgärda fel och brister som uppstår på grund av bristande kvalitet. En nyligen genomförd opinionsmätning bland svenska företagsledare visar att dessa i genomsnitt bedömer dessa till närmare 25 procent av sina verksamheters omsättningar. Att kartlägga dessa så kallade kvalitetsbristkostnader kan således vara en guldgruva för verksamheter som kan förbättra sin lönsamhet utan att det sker på bekostnad av kvaliteten. Det här projektet har genomförts på Arctic Solar AB som i dagsläget har liten eller ingen kunskap över vilka kvalitetsbristkostnader som finns eller hur stor omfattning dessa har.

AbstractClimate and environmental issues are of paramount importance. Researchers agreethat we must all contribute to a reduction of gases that contribute to climatechange. Energy consumption must decrease within all sectors and the promotionof renewable sources of energy must be introduced.Each sector should aspire to decrease its energy consumption. Energyconsumption is strongly linked to waste gases that contribute to climate change.Passive houses are a part of the construction industry's methods to attain energyconservation.Passive houses are derived from low energy houses and super insulated houses. Apassive house is intended to obtain heat from the inhabitants and through theiractivities.

Background Calprotectin is a protein expressed in the cytoplasm inside the neutrophile granulocytes. During inflammatory bowel disease (IBD), the neutrophile granulocytes are involved in a complex interaction at the inflammatory area where they die and release their content into the intestinal lumen. Therefore, calprotectin in stool is a suitable marker for diagnosis and measurement of the disease-activity in patients with IBD. The most commonly used method to detect calprotectin in stool is ELISA, but the process of manual preparation of stool samples is time-consuming.Aim The objective of the study was to evaluate an extraction method that could replace manual preparation of fecal samples and to compare different methods for measuring Calprotectin in stool using two ELISA-methods from two manufacturers and one rapidtest.Methods For extraction of calprotectin from stool samples we used sample collector tubes from Epitope Diagnostics and fecal preparation kits from Roche. Two different ELISA-kits for measuring calprotectin concentration in stool were compared.

The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.

The City of Stockholm has decided to invest in renewable energy and especially in photovoltaics. The objective of this thesis is to investigate the photovoltaic potential on roof areas that the city possesses and to further investigate some buildings of the Property Management Department. The thesis also compares some existing photovoltaic plants with the solar irradiance map which shows available roof area on each building in Stockholm. The report ends with a literature study about the climate impact and greenhouse gas emissions of photovoltaic.The total available roof area suitable for photovoltaic plants is estimated to 700 000 m2, with a potential electricity production of 110 GWh per year. This corresponds to 17 % of the City of Stockholm?s yearly electricity consumption.

The freshwater pearl mussel Margaritifera margaritifera is an endangered species. To survive, the young mussels demand a fairly coarse bottom material containing an appropriate quantity of organic substrate to survive without suffocating. In order to estimate if a bottom is suitable for juvenile mussels, samples of the sediment are needed. To obtain samples a sampling device called the Mulv collector has been developed within this project. Bottom samples were collected from 18 stations in 4 south Swedish streams, Vramsån, Kling-storpsbäcken, Brönnestadsån and Bräkneån.

This thesis aims to contribute to improved functional procurement of photovoltaic systems, PV systems. Functional procurement means that criteria concerning a function are set rather than specifying technical details or products. Possible advantages and difficulties in using functional procurement have been analyzed by interviews, simulations and a case study. Electricity production and surplus production for different scenarios have been simulated via MATLAB. The MATLAB script was also used to generate rules of thumb on feasible solar fraction for six different load profiles; a church, a farm, a car mechanic, an office, an industry and an apartment building.

The latest thing in the area of environmental building today is energy-plus-house. The idea behind the energy-plus-house is to create a house that produces more energy than it consumes. To accomplish this, the house uses renewable energy, in this particular case solar energy. With the help from a proper construction and thoughtfully projected installations you can achieve a surplus of energy. The surplus energy can then be sold to the surrounding buildings and thereby conduce to a financial profit for the household.

The rising demand for electricity and heat raises a big challange for the society and engineers. Many products have been introduced to the market to supply more energy to the energy systems. Absolicon AB is a Swedish company that develops and markets a combined heat and power generating product. The product, Absolicon X10, uses a parabolic trough to concentrate the radiation of the sun onto a receiver. The receiveris equipped with mono crystalline solar cells and is cooled by a circulating liquid media.