This rapport contains an examination of the energy consumption of a kindergarten, which areas that have the largest impact on the energy consumption and what can be done to reduce those areas in ways that are relatively easy and profitable. It is also analyzed if it is possible to reduce the energy consumption from today?s consumption to a consumption that fulfils the demands placed on low energy houses by FEBY.The focus has been on reducing the energy consumption of the areas ventilation, heating system and hot water system, since those seemed to be the easiest ones to affect and since the building is quite recently built.There are different kinds of ventilation systems, at the moment the building have a CAV-system, which means that the ventilation is too high during large parts of the day. There are different ways to manage the ventilation system, for example presence detection, humidity sensors, CO2 sensors, temperature sensors and season adjustment. Many of those are in the end dependent on CO2 sensors to guarantee a good indoor climate, therefore the focus have been placed on this system.

In Sweden, lowest acceptable haemoglobin levels in blood donators are 125g/L for women and 135g/L for men for a test sample taken in the beginning of the blood donation. Levels, which are 10g/L lower, are accepted if the sample is taken after the blood donation. Earlier studies show that the haemoglobin level decreases for a person that is lying down.The two aims of this study were to examine how much the haemoglobin levels change during blood donation and to examine if the photometrical instrument Pronto-7TM shows equivalent results to that of the established method Cell-Dyn Sapphire.In the study, 120 blood donors participated. Blood samples were taken in the beginning and in the end of the donation. Analyses by Pronto-7TM were done before and after the donation.The haemoglobin level decreased significantly during the blood donation.

The mobile revolution is here to stay, and today most people have (at least) one cell phone at home. Some even a PDA (Personal Digital Assistant)as a complement for the simpler tasks at the office, e.g sending e-mail, word processing, browsing the Internet etc. Many business have also given the employees the opportunity to do some of the business tasks inbetweeen customer visits with the help from a cell phone or PDA.Despite all this, the so called Internet connected mobile revolution is often mentioned as a big failure. Maybe because the people in general tended not to use the new technology as much as the companies predicted. This could be because they still haven't learned how it works, or just don't seem to have the need for services provided.After a couple of failures in the development process, almost every cell phone has support for mobile Internet today.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying Solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

The development of solar photovoltaic (PV) is increasing,with declining module prices and with a strongenvironmental profile. Policies are developed around theworld to achieve the targets set for renewable energy.In Helsingborg, the local power company Öresundskraft isworking with solar PV to achieve the goals of the city.With their vision: - Energy for a Better World and Powerfor the Region, their work with developing the local solarPV market is continuing and the next step is to create asolar PV policy. Today their offer is 1 SEK/kWh for theexcess electricity delivered to the grid.It turns out that compensating the customer is a vitalpolicy and it has to be dynamic to follow the decisions ofpolitics. The same survey shows indeed, thatenvironmental and technical part is of interest. Solar PVwill be supported locally to act on environmentalsustainability and locally produced electricity and withthis Öresundskrafts vision will be achieved..

The report describes the process of identifying the interference that exists in a newly installed automated robotic cell and suggest improvements to increase productivity. The cell is used for lifting up extruded aluminum sections onto a conveyor which deliver the material to a anodising line at a company that manufactures aluminum extrusions.To find the areas with the best possibility for improvements in the cell we used a variety of job measurements e.g. measure of standard times for each operation in the cell. The core of the report is a study of the robots.One reason for this study is that the robots do not reach the productivity they were purchased to. The main cause not reaching the productivity is the visionsystem.

Purpose/Aim: In the information and communication technology society (ICT) we live in today it is easy to feel that we are constantly expected to be available. The daily contact with the Internet and the use of cell phones has changed our way to communicate. With this in mind in combination with the increased stress among young adults my aim is to investigate how young adults, aged 23-26 years, experience to be constantly connected and available through the Internet and the cell phone. What are their opinions, attitudes and feelings about what this entails in their lives?Material/Method: The essay is based on four focus group interviews with sixteen students from Uppsala University aged 23-26, two groups consisting of women and two groups consisting of men.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

Zambia is a country in Southern Africa where poverty is widespread and the traditional keeping of local poultry therefore plays a crucial role in improving nutrition. Meat and eggs from poultry are important sources of protein but also of income. Improving the poultry production is thereby a method to fight poverty. For poultry, the access to light is an important factor for both growth and egg production. In this paper, the focus is on the traditional village chickens used for both egg and meat production, how they are kept, their health and welfare and if the use of a solar lamp will influence their behaviour, growth and egg production. Three studies were conducted in Chibombo and Choma Districts in Zambia were 17 farmers were interviewed regarding the village chicken management of which six farmers participated in a solar lamp experiment.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

Due to the globalization today the competition in the market has in- creased and it requires flexibility and produce according to customer demand. In order to reduce the cost of wages industrial companies are now considering moving the manufacturing to low-cost countries. To keep up with the competition in the market without moving the manu- facturing abroad, Lean Automation was developed. The concept of Lean Automation is to reduce the perceived complexity with automa- tion and make automation available for new users and in new applica- tions.Haldex Brake Products are situated in Sweden and want to maintain the manufacturing of the automatic brake adjusters in the country. It is a product well-known and highly exposed to the competition in the mar- ket.

In recent years it has become more and more evident that man has contributed to much of the climate changes that have taken place during the last century. A major challenge today is to reduce emissions and energy usage at the same time as the global population is growing. To contribute to a better environment, Stockholms Stad has set at target of becoming fossil fuel free by the year of 2050. The construction of new districts is done with this goal in mind; energy efficiency and renewable energy sources are examples of methods to achieve this.Solar energy is considered to be a sustainable energy source and the most common techniques to harvest solar energy in Sweden are Solar cells and solar collectors which produce electricity and heat respectively. This report aims to investigate whether an investment in any of these systems would prove to be economically beneficial at Kvarnholmen, a district under construction in eastern Nacka, Stockholm.Since the finished blueprints only cover a small portion of Kvarnholmen, the report examines the possibilities for a house where construction has already begun, Nya Kvarnen.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.