When a company in the manufactory industry makes costly investments, it's important that these are used as much as possible. The company in this case claims that their invested robot cell, with CNC machine isn't used enough. The questions here are: How can we improve the use of the robot cell? Which products are appropriate for the production in the robot cell? As a method to come to a conclusion, an analysis has been made over the manufactured products. And also interviews with machine operators and the production management.

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using Solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

The Swedish potential of electricity production from roof mounted solar panels has been determined in three steps: accessing the existing roof top areas, simulating the amount of electricity solar panels can produce on these areas and finally analyzing how large the necessary economical change is to make the Solar cells profitable.The total existing amount of roof top areas are 319 square kilometers and the area distribution follows the distribution of people. This leads to an installed power of 47,9 GW which are expected to produce 49,0 TWh electricity per year. If the quality of the electricity is prioritized the highest the power is reduced to 3,7 GW, generating 3,8 TWh yearly, but if the hosting capacity is calculated from Sweden?s total electricity need, the capacity is 42 TWh per year.Today, solar panels are not profitable in Sweden for houses, even though there is a subsidy of 35 % of the investment costs, discounted in 25 years. The profitability is calculated with a cost of capital of 5 %, a price on electricity of 1 SEK/kWh and an investment cost of 20 SEK/Wp.

The sun is essential to life on earth and no matter where you are, there is a constant need ofenergy. Nearly 800 000 years ago man learned for the first time to use fire in a controlled way.Since then, fire has given us the opportunity to inhabit places despite a cold climate. In Swedenthe resident sector accounts for a major part of the total consumption of energy. In a time whenenvironmental issues and greenhouse effects are increasing, we also see a future of rising energyprices. With this perspective, we have in this bachelor thesis in the Building Environment at theRoyal Institute of Technology, KTH, in Stockholm decided to focus on the renewable energysource, solar energy.The energy from solar radiation is a free resource and does not have any negative effects uponthe environment.

This study was performed to investigate the possibility to use ultrasonography as a diagnostic tool for sub-clinical mastitis in dairy cows. Five cows with high cell counts, and four cows with low cell counts were selected as cases and controls, respectively, and their udders examined with ultrasound during a 5 week period. The image of the udders of cows with high cell counts exhibited small, hyper-echoic, rounded foci, approximately 1 cm in diameter, near the milk cisterns and the base of the teats. These changes were not found consistently in all cows with high cell count, however. Ultrasonography may be a valuable complementary tool in the diagnosis of sub-clinical mastitis in dairy cow, but more cases need to be monitored before its full value can be ascertained..

The objective of this work was to evaluate and compare three field methods for detection of mastitis, California Mastits Test (CMT), DeLaval cell counter DCC (DCC) and FMA2001 Farm Milk Analyzer (FMA2001). Furthermore, to investigate at what cell count level clinical symptoms of mastitis are seen, and finally to check if the clinical findings and cell counts could be related to bacteriological findings. DCC and FMA2001 are new analytic instruments to be used on dairy farms for detection of mastitis. CMT has been a widely used cow-side-test of milk quality in mastitis control efforts, but it cannot be used for estimating cell counts in scientific studies or investigations. Two hundred and eight quarter milk samples from 52 cows were analysed with DCC and CMT, and 168 of these samples with FMA2001. Microbiological examination was done on 38 milk samples with CMT scores of 4 and 5.

Tumour development occurs to a large extent because of dysregulation of the cell cycle. Of particular importance are defects occurring in the G1 phase. The reason why G1 is critical is because of the influence of several signals (external signals as well as cyclins and cdks) on this stage. The G1 phase can be divided into two parts, G1pm and G1ps. Each part has its ?own? restriction point which needs to be passed in order to progress to S phase.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

Overall aim of this master?s thesis is to describe and identify perceived barriers in Swedish businesses within solar energy field and analyze, based on four theoretical viewpoints, how these barriers can be handled. In other words how can the barriers be overcome or eliminated to better succeed in the commercialization process? The method applied is qualitative in which data has been collected through phone interviews originated from seven Cleantech businesses which operate within solar energy. Furthermore this thesis has a descriptive- and an explorative purpose.

The purpose of this paper is for the reader to realise how national innovation systems are deeply intertwined with the legal background of a country and to understand the processes that involves national innovation systems specifically regarding the stem cell / genetics research and how the need for specific community law must be considered targeting the stem cell patents. The legal part will try to answer: Why is it important given the actual state of the European stem cell national innovation systems for the European Commission to take a stand and tackle issues regarding the patenting of the human stem cell innovations? This is done from a country industry analysis (business approach) and then linking it with competition law from a community stand point of view (that tackles biotechnology issues). In order to achieve this the paper is divided into three separate analyses beginning with a theoretical background of general biotechnology / genetic terms that will enable the reader to have a general understanding of the importance of this kind or research ( genetics / stem cell research). The chosen countries case studies exemplify very diverse economies and development perspective from the traditionally R&D intensive to the least and from the biggest countries in Europe to one of the smallest, thus giving cultural, legal, economic and scientific variety..

Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

Syndecan-1 is a cell surface proteoglycan which participates in cell adhesion, differentiation, motility, morphogenesis and intracellular signaling. The two glycosaminoglycans heparan sulfate and chondroitin sulfate are covalently attached to the ectodomain of syndecan-1 via a tetra saccharide linkage sequence. However, the ectodomain can be modified having only one or neither of the glycosaminglycans attached. The glycosaminoglycans are capable of binding ligands such as fibroblast growth factors (FGFs) and support activation of receptors. The ectodomain is proteolytically cleaved from the cell surface by metalloproteinases in a process known as shedding.

The purpose of the project is to determine the impact of Solar cells and electrical vehicles on the future electricity grid and distribution network. Future electricity grids will be affected differently than it does today. Therefore, it is important to determine the impacts so that the current electricity distribution system can be developed and redesign to achieve the future demand. In Sweden, government has changed rules and laws in order to make it easier for private sector to invest in renewable energy sources. Our project focused on the impact of the Solar cells and electric vehicles on the low voltage electricity distribution.