In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Stage-discharge equations for lakes without disharge measurementsSimon AnderssonIn 2015 all lakes, rivers, coastal water and groundwater should be of good ecological statusaccording to the water framework directive from the European Union. In the process ofimproving the quality of Swedish water bodies, knowledge of where problems occur isneeded in order to utilize the resources optimally. The ability of lakes to store water is animportant factor since it controls the flow of water through the country. A stage-dischargeequation is a mathematical relation between discharge from a lake and its water level. Bybetter understanding of stage-discharge equations for lakes, their storage capacity can bedescribed better in hydrological models.This master thesis aims to evaluate methods for determining stage-discharge equations forlakes where a variable amount of field measurements is available.

This report investigates a possible solution to the problem with adapting wave powerplants to work in countries with tidal water. The wire connecting the buoy at the surface with the generator at the bottom needs to adjust to the varying water depth. Our solution to this problem is to attach the wire to a jack which is then placed inside the buoy. The jack is then powered by an electric engine. The report discuss what forces the buoy will be exposed to and then the structural integrity of the design is evaluated through simulations.

Uvån Hagfors Teknologi AB (UHT) has developed a process ? GRANSHOT® ? for quicksolidification of metals in water baths. In the process liquid metal is splintered ? granulated ?into small drops. The drops are rapidly cooled in a water bath where all the heat energy from theliquid metal is transferred into the water.

The short term effect of phosphorus in sewage sludge was investigated to establish howmuch of this a farmer can grant him- or herself, if using sewage sludge as a phosphorusfertilizer. Possible differences in plant availability between sludge phosphorus precipitatedby iron, aluminum or calcium integrations were studied in a sandy soil at two pH levels.The sludges were analyzed using pot and incubation trials. As the intention was to investigategrowth limitation due to phosphorus deficiency, a soil with low phosphorus supplywas chosen as well as a low phosphorus application rate. Sludge corresponding to 12kg phosphorus per hectare was applied. Treatments fertilized by sludge were compared totreatments where 0, 6 and 12 kg phosphorus per hectare from mineral fertilizer was applied.Every treatment was replicated six times.

Following the accident at the nuclear power plant in Chernobyl in 1986, great volumes of137Cs were distributed over large parts of the former Soviet Union and Europe. Over Scotland,radiocaesium was deposited as wet deposition. Due to the relatively long physical half-life of30 years, there are still measurable activity concentrations in the natural environment. Thisstudy was made on two organic soils, Knockandy Hill and Rora Moss, situated in the easternpart of the central highlands of Scotland. At these two sites, studies on migration and transferbetween soil and plants were conducted.

Most of the saw and pulp industries have stored wood nearby their production, the main reason is to have a continuous wood flow to the production. Wet storage of wood is of great importance to keep the wood quality. Without water sprinkling the risk of drying outand decomposition through biological activity increases significantly and will result in a negative effect on future production and quality. One drawback of wet storage of wood is the leaching of chemical substances into the surrounding recipient. The log yard run-off contains phosphorus, nitrogen, phenols and organic substances. These substances can cause problems for the surrounding environment. The main objective of this project is to gain an understanding of the wet storage used by the Swedish wood industry and estimate the environmental consequences that run-off water will have on the recipient.

In the process of making carton boards into Skoghall Mill, are great quantities of water being contaminated. This water has to be treated before it is possible to release into the recipient, Kattfjorden. One of the contaminations that is important to extract from the wastewater, is organic carbon (measured as TOC-total organic carbon) because microbiological breakdown can lead to the bottom becomig free of oxygen.The wastewater treatment at Skoghall Mill is done through an external wastewater treatment that is located at the factory. The biological treatment (aerated lagoon) is a 140 000 m3 water pool with surface aerator, which is give oxygen to the water. In the lagoon live microorganisms who performs the biggest part of the TOC-reduction.One problem with the lagoon is that the treatment of TOC is considerably worse during wintertime than during summertime.

Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

ITT Water & Wastewater ställer höga krav på kostnadseffektiv produktion vilket är en starkt bidragande orsak till att företaget är världsledande på sin marknad. För att erhålla kostnadseffektiv produktion har kombinationen människa robot visat sig vara framgångsrik.Examensarbetets syfte var att ta fram underlag åt ITT Water & Wastewater för att ta beslut om frigörande av indirekt personal vid line 15:s isoleringsstation på Elmotorverkstaden. Syftets uppfyllande stöttades av de underbyggande syftena att försöka höja robotens utnyttjandegrad samt reducera isoleringsmaskinens omställningstid.Arbetet bygger på kvalitativa och kvantitativa data i form av mätningar, intervjuer och egna observationer. Med stöd av erhållen data lyftes fyra olika förslag fram. Förslagen understryktes bland annat av integrering av arbetsmoment, förhöjd automatiseringsgrad och outsourcing..

The focus of this project has been on the drainage tank of the reheater on Ringhals 1. This tank has on two previous occasions received such a high water level that the system automatically emergency stopped. For this reason, events and various readings from these two occasions has been specifically studied and analyzed. In order to prove theories about what causes these problems a model of the system was created in the program Dymola. Using simulation results from the model, we have been able to demonstrate how the system's measured values should look likeunder normal conditions with respect to flows, pressures, temperatures, valve positions and water level in the drainage tank.

The hospital in Varberg has a somewhat outmoded solution regarding the state of preparedness in its water sustentation. Today?s solution is both cause to a number of mishaps and high energy consumption.The report is initiated by looking into the present situation to get an insight to the problem.Today?s media depletion is measured and analyzed.Furthermore, it also looks into some earlier performed studies. These studies are followed up in order to see if measures have been taken.The report presents a number of arrangements which should be taken, amongst those a minor re-build of the current solution and a number of arrangements which leads to decreased water consumption..

I det här arbetet undersöks fältdiagnostiska metoder och användbarheten av dess resultat i planeringsstadiet av en ny trädgårdsblåbärsodling. Syftet är att fastställa vilken information som kan erhållas från en jordanalys, penetrometerundersökning och en jordmånsbeskrivning samt vilka rekommendationer från dessa undersökningar som vidare kan härledas till planeringen av en ny trädgårdsblåbärsodling. Som exempel och fallstudie används en bit åkermark i Ockelbo där provmätningarna ägde rum.Resultatet visar att fältundersökningar i kombination med en jordanalys gjord på laboratorium är ett bra verktyg för att utreda en jords grundläggande förutsättningar. Jordanalysen visar hur näringsinnehållet ser ut i jorden samt vilka eventuella näringsbrister eller näringsöverskott som finns. Penetrometerundersökningen informerar om eventuella markpackningar, som utgör eventuella hinder för t.ex.

Hylocomium splendens (Glittering wood-moss) is a common species in the Nordic countries and can be found in many different types of boreal forests. It usually forms dense moss carpets on the forest floor. The shoots grow in segments and new segments form annually on the previous years growth. The size of the segments is probably regulated in a high extent by local micro environmental conditions. Previous experiments suggest increased growth of H.

Texture is an important soil property and accurate particle size analysis of soil texture is therefore crucial. There are a number of well-established and newly developed methods available for determining soil texture. In order to compare the results of these methods, the differences between them must be determined. The difficulties, problems and differences regarding texture class determination were examined through a study performed on forest soil samples. The study compared different methods (pipette, hydrometer and field methods) and two types of dispersing agents (sodium pyrophosphate and sodium hexametaphosphate (calgon)) commonly used for particle size analysis.