Biogas is a renewable energy source that is produced by anaerobic digestion of organic mate-rial. In Sweden, biogas predominately comes from sewage water sludge and landfills or from organic waste of households and industries. Small scale digestion plants at farms are espe-cially expected to contribute to increased biogas production in the future. Biogas can be ob-tained directly in it?s raw form and used as fuel in a combustion chamber.

Eutrophication is an environmental problem that affects more than ten percent of Swedish lakes. Excess nutrients increase the growth of algae, and cause major problems in the ecosystem through oxygen-free bottoms, fish kills, and at worst dead bottoms. Agriculture accounts for 44% of human emissions of phosphorus to lakes and rivers. Leaching occurs of particle bound phosphorus and of dissolved phosphate. The amount of phosphate in the soil solution that may be leached is partly due to the prevailing pH in the soil solution. The purpose of this study was to investigate how the relationship between phosphate solubility and pH was affected by liming.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.

Wood has always been an important material for people, and it is used for many applications. As for example, fuel for cooking and heating houses, construction materials and for constructing means of transport. Since wood also is a material that with time biologically degrades due to activity by micro organisms and wood fungi it is important to find ways to protect and further lengthen the life span of the material when in service. One method is to decrease the amount of water in the material by impregnation with an hydrophobic oil. The Linotech method which uses only pure linseed oil is one such possible method. The aim of this study was to investigate the possibility to at the same time impregnate and stain/colour wood samples of pine and spruce by using the Linotech method.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

The main purpose of this project was to make a survey of the steam and electricity consumption at Akzo Nobel Functional Chemistry AB and give suggestions of how to minimize them. These three different areas were focused on. First to make a survey of all the most important consumers, second to find the electricity consumption of the air compressors and the amount of waste heat produced from them. The third area was to calculate a model of how much fresh water that is used during a cooling sequence in the water based heating/cooling system of the reactors and give a suggestion of a suitable reuse for this water.The main result is a total survey of the energy consumption in steam and electricity. The survey shows that the second largest group after drying is heating of ventilation which gives big potentials of reducing the total steam consumption if there is a way of being self supporting in ventilation heat.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

The main purpose with the project has been to approximate the magnitude of the pollution transport from the actual road surfaces and to get an approximation of the possibility to collect the pollutants to reduce the load to the water and improve the water quality.The quantity of pollution transport from the most trafficated roads areas in Örebro city has been calculated. Roads whith a traffic exceeding 10 000 vehicle/day. The study has been done with the calculation tool StormTac. Through analysis of traffic loads and road surface, which together with a different kinds of parameters gives an approximation of the pollutant transport.The calculation has included some metals and other substances in the stormwater and has also included the present of suspended solids. Included the overall study, some smaller areas has also been calculated for the possibility to remove pollutants.The work also includes calculation for three different areas for stormwater treatment.

Due to excess precipitation that cause runoff, all soils in Sweden naturally leaches nitrogen.High leaching from arable land is an environmental problem when the runoff reacheswaters. In the international agreement, Baltic Sea Action Plan, the aim is to reduce therunoff of nutrients. Sweden has agreed to reduce its load of e.g. nitrogen to the Baltic Sea.One of the proposed measures is an increased use of site-specific N-fertilization, which hasbeen shown to increase nitrogen use efficiency and therefore also reduce the nitrogen runoff.Either yields are increased with the same total amount of nitrogen, or the total quantityof nitrogen is reduced with preserved yield levels, which is profitable for the farmers.The dynamics of nitrogen leaching differs between top dressing applications above orbelow the economical optimum. There is a consensus about a difference in the dynamics,but not about its magnitude.

More frequent and intensified rainfalls are expected to occur due to climate change in the nearfuture. This together with a higher proportion of paved areas increases the pressure on today?sstorm water systems (Risinger, 2014; Boverket, 2013; Stahre, 2006). Traditional storm watersystems (i.e. underground pipe systems) have during last decades started to be questioned(Olshammar & Baresel, 2012).

The purpose of this thesis is to collect knowledge of techniques and materials for planning roofgardens. Gardens built on top of buildings is not a new phenomenon, already in the beginning of the century architects were experimenting with roofgardens. During the Modern Era roofgardens appeared as a part of the design and worked well together with flat roofs and the ideas of light, air and greenery. Today the most common kind of roofgarden is on a ground-level joist that hides parking or other underground functions. The most important difference between planning a roofgarden and a garden on the ground is the limitation of the load of the roofgarden. Plants, paving-material and equipment must be chosen with this in mind. A light and thin layer of soil demands plants with small needs for water and nutrition.

The estate of Rämningstorp in the region of Västergötland in southern Sweden is administered by the holding trust company Skogssällskapet i Skövde. In 1999 measures were taken by Skogssällskapet to drain the stream Fredstorpsbäcken as a means to increase the forest productivity of the surrounding lands, which are situated on the estate of Rämningstorp. Almost immediately after the drainage, the streamwater turned turbid and a landowner downstream reported the issue to the county administrative board of the region. The aim of this thesis was firstly to analyse the suspended matter that appeared during summer/autumn and secondly to explain why it came to be. Initial hypotheses for the explanation to the greyish turbid water were that it was either 1) a chemical/biochemical precipitate, or 2) an bacterial/algal blooming.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

Water is the most essential resource for life. In cases where drinking water is processed from surface water it is important to ensure the raw water is of good quality, and is suitable for processing through the water treatment plant.The drinking water for Västerås is sourced from Västeråsfjärden, in the western side of Lake Mälaren. The city itself is home to marinas, ports, a wastewater treatment plant, the Svartån outlet, sewage pumping stations and stormwater outlets. Because of the negative effects these activities have on surface water quality, Mälarenergi AB is interested in relocating the raw water intake point to Granfjärden, 10 km east of Västeråsfjärden. At Granfjärden the intake point would be less exposed to the activities in Västerås, and could be placed at a greater depth, resulting in better water quality.In this Master?s thesis the water quality and the pollution risks at Västeråsfjärden and Granfjärden sites are compared.

The focus of this study was to examine the nutrients and benthic organisms of the bay ?Mönsteråsviken?, which is influenced by eutrophication. The purpose was also to look at an interesting gradient forming in the bay, namely the distance from the river outflow of Lillån. At 18 sampling sites in the bay samples of water, sediments and benthic organisms were collected in late April of 2011. The water was analyzed for nitrate, phosphate and chlorophyll.