Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

The aim of this study was to find relations between parents background and education ina wider sense and their children's success in school. The study also includes genusdifferentiations, the family profile and residential areas influence on children's ability anddetermination to study.The study confirmed earlier research that children's success in school is to some extentdependant on their parents education. At the same time it was shown that in most casesthe children reached higher level of education than their parents ? also when they werepoorly educated or had emigrated from a country with big cultural differences. It was alsoevident that children with at least one Swedish parent (and presumably Swedish as theirmother tongue) reached higher educational levels than other children.Children from single parent families often stopped their school carrier after the 9-yearcompulsory class while children of dual parent families more often continued to university.In general, girls were more affluent in school than the boys.

The aim of this study has been to create an understanding for the situation of an often forgotten group in foster care, the carers? own children. Our main focus has been the experience this group has of foster care, their experience of participation in caring for the foster children and their possible need of support and help. Our chosen method has been qualitative interviews with six adult children of foster carers, two men and four women. The theory used in this study has been Sense of Coherence.Our interviewees gave mainly a positive description of being part of a foster family even though they could give examples of difficult situation and of loss.

It is of increasing importance to in the most effective possible way, manage and control all the transactions of raw materials, products and information that are exchanged between an organization and all its operators. These flows and the need for strategy and managing the processes of planning, implementing and control of the supply chain, has given name to the concept supply chain management. Supply chain management involves all movement and storage of raw material, and all the processes that is needed to manufacture a product from origin to consumption. Globalization, technology and increasing time and quality-based competition are all driving forces behind the concept and reasons for an increasing interest in supply chain management.The purpose of this essay is to by using a qualitative case study examine which decisive success factors that can be identified for effective supply chain management. We have compiled different theories on the subject to use for analyzing a case study Li & Fung, who is a successful supply chain management company.

Talented and committed employees are important resources for a company?s competitiveness. With the escalating competition for competent employees, a strong employer brand has come to play an increasingly important role as a means of attracting employees with a desirable profile. In this study, brand theory is applied to the results of a quantitative study of students? evaluation of an attractive employer, in order to identify the factors which explain why certain employers are perceived as more attractive than others.

Title: Co-operative, prevent or complement? - An essay on the relationships between control systems. Authors: Kim Eriksson and Victoria KarlssonPurpose: The essay aims to describe the relations between control systems and how they related to each other, based on an operationalization of the control systems. Research question: What are the control systems relations to each other? With regards whether control systems co-operative, prevents and/or complement each other.Theoretical framework: The essays theoretical framework is based on Malmi and Browns (2008) description of five different control systems and control mechanisms associated with each control system.   Research methodology: The method was based on three different data collection methods. These methods were observations, documentation, and semi-structured interviews.Conclusions: It is concluded that the control systems has comprehensive relations. Control systems have more, than one, relation to each other..

We derive the equation linking the Weyl tensor with its Lanczos potential, called the Weyl-Lanczos equation, in 1+3 covariant formalism for perfect fluid Bianchi type I spacetime and find an explicit expression for a Lanczos potential of the Weyl tensor in these spacetimes. To achieve this, we first need to derive the covariant decomposition of the Lanczos potential in this formalism. We also study an example by Novello and Velloso and derive their Lanczos potential in shear-free, irrotational perfect fluid spacetimes from a particular ansatz in 1+3 covariant formalism. The existence of the Lanczos potential is in some ways analogous to the vector potential in electromagnetic theory. Therefore, we also derive the electromagnetic potential equation in 1+3 covariant formalism for a general spacetime.

Dooria Sweden AB is one of the main door- and doorframe manufacturers inSweden. They deliver door frames for indoor use for project oriented buildingsites, for these types of building sites the doorpost comes pre-assembled. DooriaAB wants to minimize transport to reduce impact on environment and thetransportation costs of pre-assembled doorframes, this thru simplifying themethod of assembly.The main purpose of this thesis has been to develop a prototype solution thatbrings the three parts of the doorframe together with the same properties regardingstability and tightness of joints as the current method of assembly. A profile ofdemands and wishes were created in collaboration with Mårten Dragstedt, DeputyDirector of Dooria Sverige ABBy following the chosen method the authors have been able to produce a fullyfunctional prototype that meet the demands that were put on the product. Catia V5R20 has been used as an aid during prototype construction and virtual tests.

Our greatest interest within crop farming is to grow sugarbeets, that?s why we want to write about something new in this sector. We heard that a new concept had come to Sweden so we wanted to find out everything about this machine. This new technique was a self-propelled cleaning loader for sugarbeets. This machine is supposed to replace a loader and a cleaning machine when the sugarbeets is going to be loaded, cleaned and delivered to the sugerbeet factory. The cleaning loader picks up the sugarbeets with rollers from the pile, which is placed close to the road.

This essay examines the process of fair value accounting of financial assets in a Swedish commercial bank, in contrast to the theoretical approach stated by IASB. The theoretical background contains a review of the academic standpoint on fair value accounting and historical cost accounting, a detailed description of fair value accounting according to current and future IASB regulation and on the American FAS 157 regulation. The empirical case study describes the process of valuing and classifying financial assets into level 1 and level 2 of the fair value hierarchy. The analysis describes how the legal requirements for classification are interpreted and applied in practice when valuing bonds and derivatives. The authors provide an explanation as to why the majority of financial assets are valued mark to model rather than mark to market as well as a suggestion on how the share of market valued assets can be increased..

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

The purpose of this study is to perform a description of how parents experience their life in a stepfamily and to examine how the parents experience the involvement from their new partner in the children?s upbringing. The issues are: (i) which expectations do the parent has on their new partner in the role as stepparent to the child, (ii) how active does the parent experience their new partners? step parenting concerning the stepchild and (iii) how does the parent expect the new family to take shape? A qualitative study has been done through interviews. The participants were sex biological parents, of which four were fathers and two mothers.

In my work I have chosen to examine the profitability for small scale production of hemp briquettes. My study also includes a review of which briquette technique that is the most common one among small scale producers. The reason that I have chosen this subject is because of the discussions about climate and energy that we face almost every day. I also think the subject is extra interesting in these days when the grain prizes are at a historic high level. In order for me to achieve a reliable report, a hemp and briquette producer has given me the actual data from his farm. In that way I have been able to make my calculations from a concrete perspective.

We are two students of Horticulture management with marketing profile, now doing an extended course in Business Leadership within horticulture and agriculture. During our 2 years of studies we have used the same company once before, and this project is an expansion of a previous piece of work. We decided, in agreement with the company, to use an inquiry for our study. For this we have contacted 290 of the company's already existing customers. The primary purpose of the survey is to analyze the service offered by the company.

This is a project about how you grow timothy seed and red clover seed successfully. The main part is about economic analyse to see if it is any economy by growing leyseed. There are lots of things to be aware of to get all the costs in your economic analyze. Timothy Timothy seed is planted on 4400 hectares in Sweden. It is possible to grow timothy seed in the south part of Sweden. Timothy is very sensitive for dry weather in spring and in the beginning to summer. Timothy gives acceptable harvest of seed for about three years. Red clover Red clover is also sensitive for dry weather and is suitable to grow in the south part of Sweden.