This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

In Sweden and in Scandinavia the amount of tree species are rather few. However many different forms of trees arise due to mutations and gives rare appearances like cut-leaved and hanging forms. In some cases these trees are interesting as cultivars and a few of them have become popular garden trees. The knowledge of the original trees and early propagation is meagre.In this study a selected group of trees were found through search of literature. Eight tree forms were chosen and investigated in situ.

BackgroundIncreased prevalence of obesity in children- and young adults and risk for diseases related to obesity will increase the burden on medical care. It is important to identify early risk factors that can be noticed by nurses in the daily work.AimThe aim was to investigate whether children- and young adults themselves perceive overweight as a problem and if there was a difference in the measured activity levels between overweight children- and young adults in families with different socio-economic family status.Method descriptionExisting survey from the Obesity Centre at the Akademiska Sjukhuset were examined together with the results from an accelerometer, where children- and young adults activity was recorded, compared to their perception of how active they were. The results were compared using a statistical software program and compiled with descriptive and non-parametric statistics.ResultsThe results do suggest that the majority of children- and young adults experiencing excessive weight have a problem in their everyday lives. Nearly half overestimate themselves as more active than what the actual measurements with accelerometer demonstrated. Much time is spent in front of the TV and computers.

The snow leopard (Panthera uncia) is an elusive felid, native to the mountains in central Asia. Basic knowledge about the snow leopards? ecology has long been lacking but is advancing with the help of the GPS-technology. GPS cluster analysis can provide insight in the diet and prey selection of elusive predators, such as the snow leopard. Acceleration data from GPS collars can be used to study animal behavior but the two have never been combined to gain more detailed information of the feeding behavior of large carnivores.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

The independent audit function plays an important role in our modern society as it strengthens the credibility of information given out by firms. A fundamental condition for the maintenance of confidence towards the audit function is the auditor?s independence. This phenomenon has been acknowledged threw several well-known audit scandals during the last decade, including the classical Enronscandal. In the repercussions of these huge auditing scandals, governments all over the world were now founding more restrictive rules and laws about audit independence.

Sammanfattning Fel i programvara (buggar) kostar ofantliga summor varje år. I detta arbete presenteras en metod där programexekveringsmiljön utan vare sig programmerarens eller användarens inblandning utförligt kan rapportera och dölja effekterna av en avsevärd andel buggar. Genom att kompilatorn eller tolken tillåter att en och samma procedur implementeras hur många gånger som helst införs ett helt automatiskt stöd för N-Version Programming (NVP) omedelbart i programspråket. Tekniken gör programvaran feltolerant och blir ett komplement till kostsam och ofta bristfällig testning. En tolk utvecklades för ett programspråk som tillåter multipla definitioner av procedurer. Därmed har det inbyggt stöd för feltolerans genom redundans på procedurnivå. Ett experiment genomfördes där nio programmerare oberoende av varandra implementerade 12 utförligt specificerade procedurer.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

It always has been a need for the abiltiy to create color proofs. When an error occurs late in the production process, itis allways complicated and difficult to correct the error. In this project, digital proofs been made and discussions havebeen held with several people in the printing industry, in order to examine how well excisting digital proofs, meet thedemand of the market. And how close the digital proofs can come to the actual printsheat from the press. The study hasbeen shown that the one thing that has had the most influence on the outcome for the quality of a digital proof, is theprintshop operator?s knowledge about color management and proofing systems.

AimThe aim of the study was to develop a method for the survey of play movement demands and temporal patterns in order to enable a descriptive study of the defensive players in American Football. The overall aim was to  improve the understanding of how American Football is played to create opportunities for enhancement of current or developing new training methods to better suit football.MethodFifty plays from a Division 3 college football game on video from 2005 was divided into sequences of action for one player each from the defensive line, linebackers and defensive backs and analyzed with the video analyzing software cSwing. Every players sequence of action was recorded in a spreadsheet and noted on a scaled football field where distances were measured and together with time stamps from cSwing velocity was calculated.ResultsUsing this method it was possible to describe the play movement demands and temporal patterns which was the main task of the study. The defensive end worked on an average 4.61 seconds per play, the distance was 12.4 meters and average speed 2.5 m×s-1. The linebacker worked on an average 4.35 s per play, 13.7 m and at a mean speed of 3.0 m×s-1.

The goal of this thesis is to investigate the W3C Geolocation API from a developer?s perspective, focused on whether it makes development of location-based applications more accessible to developers. This has been investigated by looking at available ways to locate, possible uses, the functionality offered, the necessary level of prior knowledge needed for a developer and requirements on developer tools. This has been achieved through studies in relevant areas, a thorough introduction to W3C Geolocation API functionality, and by using the API to develop two different location-based applications as a demonstration. Testing of applications, on different platforms and in different environments, in conjunction with investigation of the rest of the material has shown that W3C Geolocation API in many ways actually makes development of location-based applications more accessible for developers. The API also provides fully adequate functionality and quality to meet the requirements for development of both simple and very advanced location-based applications. Målet med denna uppsats är att undersöka W3C Geolocation API ur ett utvecklarperspektiv, fokuserat på om den gör utveckling av positionsbaserade applikationer mer tillgänglig för utvecklare.

Two ecological models of nitrogen processes in treatment wetlands have been evaluated and compared. These models have been implemented, simulated, and visualized in the Modelica language. The differences and similarities between the Modelica modeling environment used in this thesis and other environments or tools for ecological modeling have been evaluated. The modeling tools evaluated are PowerSim, Simile, Stella, the MathModelica Model Editor, and WEST. The evaluation and the analysis have been performed using McCall?s factors for software quality (McCall et al, 1977), a correlation analysis and the Constant Comparative Method (Glaser&Strauss, 1999).

För att en uppfinning ska anses vara patenterbar uppställer artikel 52(1) EPC fyra rekvisit. Det ska vara en uppfinning som är ny, har uppfinningshöjd och är industriellt tillämpbar. Uppfinningsrekvisitet finns inte definierat i EPC utan har utvecklats genom praxis. För att en uppfinning ska anses vara en patenterbar uppfinning ska den ha teknisk karaktär. Vad som utgör teknisk karaktär har även det utvecklats genom praxis.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.