No infrastructures today are growing faster then communication network. The requirement of being able to communicate in a fast and qualified environment to a low cost increases in line with the development and competition. Itera Networks is no exception when it comes to rapidly developing new and better network solutions for themselves and for their customers. With these requirements in mind their needs for an analysis of the existing communication solution becomes very obvious. This project contains such an analysis in which various studies of the existing network environment have been made.

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Open source is growing outside the boundaries of hackers, amateurs and software development, creating a humongous potential in many different areas and aspects of society. The intrinsic and extrinsic motivations that drives open source have been in the subject of much research recently, but how they affect each other when paid and unpaid contributors come together is still hidden in obscurity. In this study I investigate how intrinsic and extrinsic motivation correlates with each other and how those correlations affect paid and unpaid open source software contributors. The literature synthesis is based on of systematic reviews through searches in library databases, identification of articles by searching on the Internet and by reading relevant books. My results indicate that intrinsic and extrinsic motivations continuously affect each other and that paid contributors are more vulnerable since their extrinsic motivation in terms of money is reached only when many other motivations are fulfilled.

Testing has always been an important task in the scope of software quality. Though it has never been as much appreciated within the management of the organisations as the software development has. However testing is becoming more attractive within organisations because it becomes more evident how much money working systems saves in contrast to defect ones. A tester often use testing tools to simplify the work progress. There are a lot of tools nowadays but not many evaluating models which helps the tester to know which one to recommend.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

In contemporary encryption the vast amount of text subject to cracking has brought about the demand for methods distinguish files more likely to be encrypted. The encryption software Truecrypt can encrypt files that are not possible to identify with a file signature. To solve the detection problem, an algorithm sensitive to the absence of structure in the very code of files was developed. The program was written in the programming language EnScript which is built into the forensic software suite EnCase. The essential part of the algorithm therefore deployes the statistic of a chi-square test for deviance from a uniform distribution to distinguish files with contents that appear to be random.

The purpose of this thesis was to investigate how the distance between real estate manager and the managed item influenced the real estate management process. The overall real estate management within Lantmännen Fastigheter AB was investigated to give suggestions on how to improve the quality of the real estate management within the company. To do this, questionnaires, interviews and observations was performed within the Lantmännen Fastigheter AB organization. Real estate managers answered questions about their role as real estate manager, maintenance planning, decision processes, leasing and strategies within the company.The analysis of the questionnaires, interviews and observations showed that the real estate managers wants to rearrange their spent working hours around on working tasks to spend more time on the tasks that brings income and spend less time on tasks that are unsatisfying and unnecessary. The analysis also shows in which areas the real estate managers want more support and education and that they mostly work with unplanned maintenance.

With the digital revolution within video games, the need for Digital Rights Management (DRM) has increased significantly, alongside with the increasing problem of copyright pirates. To counter pirates, DRM was created to prevent illegal copying of software, this to ensure that the Distributors received an income for their work. DRM has, since the start of its use, been getting, a lot of bad criticism from the users of the software protected by DRM. The main function of this paper is to describe the creation and development of DRM by analysis of the vision of different groups on this phenomenon. The main questions are as follows, is it possible to define the very reason for why DRM was created and if so, can its development through time be defined too? What differences in opinions are there when it comes to DRM, counting the two major groups of creators, sellers, distributors (referred to as distributors) versus individual users (referred to as consumers)? In what way will the research results suggest that the future DRM will develop?The development has gone from solving puzzles in a handbook to start the game each time the user wants to play, to serial numbers that is needed during the installation of the game.

Requirements management is an important part of the software development process. The success of a project may depend on how this is handled. Even though several research studies indicates that more attention should be paid on non-functional requirements, the primary focus in practical projects still regards identifying functional requirements. Especially the prioritization of the non-functional requirements has been proven to be of great importance for the success of a project.This report investigates basics in agile requirements management involving opinions from experts from a software development company. This is done with help of existing literature and interviews with key actors involved in prioritization at the company.

Aim and Problem statement The study aimed to investigate views on physical health amongst patients in methadone maintenance program, which is a subject little explored. Previous studies suggest that methadone patients are at risk developing illnesses related to the metabolic syndrome and an unhealthy lifestyle. Methadone also has side effects such as weight gain and irregular levels of glucose. Method This qualitive study included seven interviews with patients in the methadone maintenance program in Uppsala. Qualitive content analyses were performed Findings Content anlyses gave the theme: The view on physical health is a stuggle after normality were ambivalence of lifestyle changes and alienation causes instability in helath.

This thesis considers the development of the software for an, newly developed, embedded real-time control system, based on a Periferal Interface Controller (PIC). The control system is developed to be used for several different applications. In this thesis work, software for two different applications are developed. The first task is a time controlled system, while the other task is implementation of aPI-/PID-controller. A user interface is also developed and implemented.The time controlled system is an automatic horse feeder, which is used for feeding horses at certain predefined points in time.