Radio frequency identification (RFID) is a versatile wireless technology usedworldwide. The fields of applications are many and its popularity constantlygrows due to smaller in size, better and less expensive components. RFID isused to identify, track or share information about an object using radio waves.This master thesis describes the process of designing and implementing ahandheld UHF RFID reader. The goal was to, based on a UHF RFID-chipdesign a fully functional, small in size and power efficient device. Amicrocontroller provides the user interface and is also used to control theRFID-chip and a Bluetooth device.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Modern agriculture equipment are more computer based today, and many equipments use a terminal in the tractor where the driver have the opportunity to make adjustments to the equipment. This is the reason why ISO developed a new standard called ISOBUS. It is a communication standard based on CAN specially adapted for griculture equipments. The purpose of the standard is that it should be ossible to equip a tractor with a standard terminal called Virtual Terminal that can be used to control the equipment. The use of the terminal should be independent of the manufacturer of the tractor as well as of the equipment.The purpose of this report is to ?nd a solution of how to use CC Systems on-board computer, CCP XS, as a Virtual Terminal.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

The background to this study is the government’s investment in design and the increase of design education around the country. As a future design teacher (industrialdesign) at high school/college, it is of great interest for me to look closer at student’s attitude towards design and design educations at high school.Questions that have been investigated are student´s attitude towards design; design as a concept but also as a phenomenon. How does the student counselor inform the students of the differentchoices before choosing high school?Does the students view on design correspond to what the student counselor say?What opinion does the student counselor have to the concept design as well as design in highschool? Is design just a craze or here to stay?To get answers I have made interviews with student counselors at two different schools, I have also been in contact with a student counselor on the internet. Their thoughts will clarify thesituation that the students might be in.

This report is introduced with a presentation of fundamental electromagnetic theories, which have helped a lot in the achievement of methods for calculation and design of microstrip transmission lines and circulators. The used software for the work is also based on these theories. General considerations when designing microstrip solutions, such as different types of transmission lines and circulators, are then presented. Especially the design steps for microstrip lines, which have been used in this project, are described. Discontinuities, like bends of microstrip lines, are treated and simulated.

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

The aim of this report is to see whether the graphic design of a game influences children?s will to play games. I am especially looking at minimalist graphic design and how well it works for a game aimed at children age 7-9. Does the style of the game design have any impact at all concerning the children?s wish to play the game or is the game mechanic all that matters.

The engine of JAS 39 Gripen, RM12, has recently been equipped with a new flameholder and a new engine inlet. This change has caused an increased noise level from the engine when the afterburner is in use. The noise level reaches its peak when the afterburner is partially used. The problem is thought to be unstable combustion in the regions around the flameholder. A solution to the problem has been proposed by Volvo Aero.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

Heat and power stations are often in need of optimizations. A simulation model is a tool for findingways to optimize the plant. The scope of this diploma work is to develop a simulation model ofBoiler 5 at Mälarenergi AB. Boiler 5 is a circulated fluidized bed boiler that was taken into service inyear 2001. Among the included parts in the boiler are cyclone, convection part andINTREX-chambers.