This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Nowadays, packaging design is seen as a competitive tool and its importance for corporations is becoming increasingly apparent. The rivalry within homogeneous markets puts high demands on differentiation and the ability to create something more than the product itself. With this fundamental question, the soft drink industry has been examined and a case study of the brand Coca-Cola has been performed. The aim is to investigate how packaging design is used as a tool for strengthening a brand and to explore which additional values this contributes. In addition, the study observes the most important factors in the development of packaging design.A theoretical work of reference, consisting primarily of theories related to branding, design development and visual identity, has been developed to support the study.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Man började skära med vatten i USA för över 30 år sedan. Något senare kom idén att blanda tillabrasiv tillsats i form av sand vilket gjorde det möjligt att skära i hårdare material. Tekniken ärunder ständig utveckling och efterfrågan på möjligheten att vinkla skärhuvudet har på senare årökat.Vid skärning med munstycket och jetstrålen vinkelrät mot bearbetningsytan skapas ett litetvinkelfel vilket medför att snittytan blir konisk. Munstycket kan då vinklas för att kompenseradetta fel, så kallad vinkelkompensering. Munstycket kan också vinklas för fasning av detaljervilket är vanligt i samband med beredning före svetsning, så kallad fasning.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Title: The way to successLevel: Final assignment for a Master?s Degree in Business AdministrationAuthors: Larisa Glazkova and Veronika LarssonSupervisor: Jonas KågströmDate: 2011 ? JanuaryAim: Many companies are started each year, but only some of them are successful and generate worthwhile profits. Many new companies do not survive the first few years. The purpose of this thesis is to identify factors that can lead to success for small and medium-sized enterprises in Gästrikland.Method: We analysed 559 interview surveys that were collected during the years 2004-2010 and success factors were defined. Additionally, financial reports from the database Retriever were analysed.

The purpose of this thesis is to study how swedishness is constructed and narrated in two Swedish documentary series that picture the Swedish participation in the international ISAF mission in Afghanistan. The main focus lies on how the Swedish soldier as such is portrayed, on which values, characteristics and qualities that they are said to embody and how these are linked to notions of swedishness, particularly the strong historical narrative, formed during the second half of the twentieth century, that defines Sweden as a peaceful, neutral and humanitarian state, with peaceful, enlightened and democratically minded citizens. Theoretically it draws on the concept of metanarrative to explain how ideas of shared national origin translates in to a broad organizing discourse, that defines, interprets and communicates notions of what it means to be a Swede and what is needed to make claims on swedishness. Another concept, that of national bodyscape, is also used to further define and explain how ideas of nationality are embodied and take the form of specific characteristics and  personal qualities. The meaning-making in these two series makes use of the above mentioned definition of swedishness as defined by humanitarian concerns, democratic ideals and moral superiority to construct an image of the Swedish soldiers as on the one hand soft, humanitarians, who are needed in Afghanistan because of their especially strong sense of justice and moral, and, on the other, as tough soldiers, who are able to participate in every aspect of the war as fighters.

The purpose of this thesis is to study how swedishness is constructed and narrated in two Swedish documentary series that picture the Swedish participation in the international ISAF mission in Afghanistan. The main focus lies on how the Swedish soldier as such is portrayed, on which values, characteristics and qualities that they are said to embody and how these are linked to notions of swedishness, particularly the strong historical narrative, formed during the second half of the twentieth century, that defines Sweden as a peaceful, neutral and humanitarian state, with peaceful, enlightened and democratically minded citizens. Theoretically it draws on the concept of metanarrative to explain how ideas of shared national origin translates in to a broad organizing discourse, that defines, interprets and communicates notions of what it means to be a Swede and what is needed to make claims on swedishness. Another concept, that of national bodyscape, is also used to further define and explain how ideas of nationality are embodied and take the form of specific characteristics and  personal qualities. The meaning-making in these two series makes use of the above mentioned definition of swedishness as defined by humanitarian concerns, democratic ideals and moral superiority to construct an image of the Swedish soldiers as on the one hand soft, humanitarians, who are needed in Afghanistan because of their especially strong sense of justice and moral, and, on the other, as tough soldiers, who are able to participate in every aspect of the war as fighters.

Bakgrund: På senare år har män som våldtäktsoffer fått en ökad uppmärksamhet, men fortfarande fokuseras majoriteten av forskningen på kvinnor. Det finns många olika myter och fördomar som tilldelas våldtäktsoffer. Ett offer för våldtäkt drabbas av både fysiska och psykiska men. Vårdpersonal måste kunna se förbi sina fördomar för att ge adekvat och lika vård till alla individer. Syfte: Att belysa skillnader och likheter rörande studenters attityder/föreställningar gentemot män respektive kvinnor som blivit utsatta för våldtäkt.

This study is about to see whether the two models representing the strategies of lean production is to use and apply in different companies. The models are structured in two different ways in which one of them is checking the softer elements of lean production in the form of leadership and strategies. This model is called Lesat and is based on interviewquestions. The second model, called "learning to see" is about identifying flows. This, together shall then give an idea of how mature companies are when it comes to a whole in the concept of lean production, and susceptibility to use these models to their respective companies. The study is conducted in two companies, SKF couplings systems and AQ parkoprint.

Over the course of the past the agricultural sector has been characterized by radical market changes. Changing market conditions have forced owners of agricultural and forestry businesses to make further investments. This increase in investments has led to a greater need for external capital, which has increased the relationship between banks and owners of agricultural and forestry businesses. The financial sector is characterized by strong rivalry, which forces banks to create strategic positions in the financial market. Since agricultural and forestry businesses are generally seen as secure customers by banks, due to high property and land values, the competition between banks with agricultural and forestry businesses as customers has amplified.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.