Introduction: A job interview is for both the candidate and the company involved, an importantsituation. It might be tempting for the candidate to adjust the answers to the job in question or what heor she thinks the recruiter wants to hear. This behaviour is a part of what socialpsychology would callimpression management. This term means that you try to control the impressions you send out andaccordingly adjust your behaviour for the current situation.Purpose: Candidates usage of impression management is a widely debated subject where theresearch mainly has focused on the candidates, their strategies and the efficiency of impressionmanagement. Our purpose with this thesis is therefore to see how recruiters experience candidatesimpression management in a job interview, how they handle it and what level of acceptance they havefor it.Theoretical perspectives: The theories and previous research used as models for explanation andbasis for discussion is mainly Erving Goffman´s (1974) dramaturgical perspective and thoughts aboutimpression management and Mark R Leary´s (1995) theories concerning impression managementtactics.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Nowadays, packaging design is seen as a competitive tool and its importance for corporations is becoming increasingly apparent. The rivalry within homogeneous markets puts high demands on differentiation and the ability to create something more than the product itself. With this fundamental question, the soft drink industry has been examined and a case study of the brand Coca-Cola has been performed. The aim is to investigate how packaging design is used as a tool for strengthening a brand and to explore which additional values this contributes. In addition, the study observes the most important factors in the development of packaging design.A theoretical work of reference, consisting primarily of theories related to branding, design development and visual identity, has been developed to support the study.

Bakgrund: Enligt Svenska Bankföreningen (2012) uppgick den utgivna volymen av aktieindex-obligationer på den svenska marknaden under 2011 på strax under 42 miljarder SEK. Framför-allt två specifika händelser låg bakom tillkomsten av strukturerade produkter på den svenska marknaden; förskjutningen av ansvaret för sparande från det offentliga till det privata samt avregleringen av de finansiella marknaderna som inleddes redan under 1970-talet (Lindqvist & Malmström, 2010). Privata investerare lockas att investera i strukturerade produkter av den begränsade risken att förlora hela investerade beloppet, samtidigt som man har chansen att vara med på en eventuell positiv utveckling. Bland annat har strukturerade produkterna fått utstå kritik för deras avgifter och kostnader som är svåra för investerare att förstå (Finansin-spektionen, 2012a, s.32 ff.).Syfte: Syftet med denna studie är att ur en placerares perspektiv genomföra en granskning av strukturerade produkters prissättning vid emissionstillfället genom att jämföra produkternas emissionspriser med det teoretiska värdet vi räknar fram för respektive produkt.Genomförande: På grund av den stora bredden av strukturerade produkter, avgränsar vi oss till endast aktieindexobligationerna på den svenska marknaden. Genom att replikera produk-ternas kassaflöden kan vi beräkna respektive produkts teoretiska värde som sedan kan jämfö-ras med produktens emissionspris för att på så sätt undersöka förekomsten av eventuella skill-nader som inte kan hänföras till produkternas arrangörsarvoden.Slutsats: Vår undersökning visar på att det existerar stora skillnader vid emissionstillfället mel-lan det teoretiska värdet som vi har beräknat och de priser som produkterna har emitteras till.

Bakgrund: Enligt Svenska Bankföreningen (2012) uppgick den utgivna volymen av aktieindex-obligationer på den svenska marknaden under 2011 på strax under 42 miljarder SEK. Framför-allt två specifika händelser låg bakom tillkomsten av strukturerade produkter på den svenska marknaden; förskjutningen av ansvaret för sparande från det offentliga till det privata samt avregleringen av de finansiella marknaderna som inleddes redan under 1970-talet (Lindqvist & Malmström, 2010). Privata investerare lockas att investera i strukturerade produkter av den begränsade risken att förlora hela investerade beloppet, samtidigt som man har chansen att vara med på en eventuell positiv utveckling. Bland annat har strukturerade produkterna fått utstå kritik för deras avgifter och kostnader som är svåra för investerare att förstå (Finansin-spektionen, 2012a, s.32 ff.).Syfte: Syftet med denna studie är att ur en placerares perspektiv genomföra en granskning av strukturerade produkters prissättning vid emissionstillfället genom att jämföra produkternas emissionspriser med det teoretiska värdet vi räknar fram för respektive produkt.Genomförande: På grund av den stora bredden av strukturerade produkter, avgränsar vi oss till endast aktieindexobligationerna på den svenska marknaden. Genom att replikera produk-ternas kassaflöden kan vi beräkna respektive produkts teoretiska värde som sedan kan jämfö-ras med produktens emissionspris för att på så sätt undersöka förekomsten av eventuella skill-nader som inte kan hänföras till produkternas arrangörsarvoden.Slutsats: Vår undersökning visar på att det existerar stora skillnader vid emissionstillfället mel-lan det teoretiska värdet som vi har beräknat och de priser som produkterna har emitteras till.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Man började skära med vatten i USA för över 30 år sedan. Något senare kom idén att blanda tillabrasiv tillsats i form av sand vilket gjorde det möjligt att skära i hårdare material. Tekniken ärunder ständig utveckling och efterfrågan på möjligheten att vinkla skärhuvudet har på senare årökat.Vid skärning med munstycket och jetstrålen vinkelrät mot bearbetningsytan skapas ett litetvinkelfel vilket medför att snittytan blir konisk. Munstycket kan då vinklas för att kompenseradetta fel, så kallad vinkelkompensering. Munstycket kan också vinklas för fasning av detaljervilket är vanligt i samband med beredning före svetsning, så kallad fasning.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

Aim: The study aims to investigate the distribution of grades between students in a practical subject and in a theoretical subject.The problem:What is the grade distribution in physical education and mathematics, with respect to gender, socioeconomic background, parental education, ethnicity, and physical activity?Method:To answer the aim of the study a quantitative method was chosen. As the collection method used was questionnaires to 620 students in the 9th grade in Stockholm. Of the 620 questionnaires, 597 questionnaires were used for the static analysis. The method of analysis used cross tables and logistic regression analysis.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Title: The way to successLevel: Final assignment for a Master?s Degree in Business AdministrationAuthors: Larisa Glazkova and Veronika LarssonSupervisor: Jonas KågströmDate: 2011 ? JanuaryAim: Many companies are started each year, but only some of them are successful and generate worthwhile profits. Many new companies do not survive the first few years. The purpose of this thesis is to identify factors that can lead to success for small and medium-sized enterprises in Gästrikland.Method: We analysed 559 interview surveys that were collected during the years 2004-2010 and success factors were defined. Additionally, financial reports from the database Retriever were analysed.

The purpose of this thesis is to study how swedishness is constructed and narrated in two Swedish documentary series that picture the Swedish participation in the international ISAF mission in Afghanistan. The main focus lies on how the Swedish soldier as such is portrayed, on which values, characteristics and qualities that they are said to embody and how these are linked to notions of swedishness, particularly the strong historical narrative, formed during the second half of the twentieth century, that defines Sweden as a peaceful, neutral and humanitarian state, with peaceful, enlightened and democratically minded citizens. Theoretically it draws on the concept of metanarrative to explain how ideas of shared national origin translates in to a broad organizing discourse, that defines, interprets and communicates notions of what it means to be a Swede and what is needed to make claims on swedishness. Another concept, that of national bodyscape, is also used to further define and explain how ideas of nationality are embodied and take the form of specific characteristics and  personal qualities. The meaning-making in these two series makes use of the above mentioned definition of swedishness as defined by humanitarian concerns, democratic ideals and moral superiority to construct an image of the Swedish soldiers as on the one hand soft, humanitarians, who are needed in Afghanistan because of their especially strong sense of justice and moral, and, on the other, as tough soldiers, who are able to participate in every aspect of the war as fighters.

The purpose of this thesis is to study how swedishness is constructed and narrated in two Swedish documentary series that picture the Swedish participation in the international ISAF mission in Afghanistan. The main focus lies on how the Swedish soldier as such is portrayed, on which values, characteristics and qualities that they are said to embody and how these are linked to notions of swedishness, particularly the strong historical narrative, formed during the second half of the twentieth century, that defines Sweden as a peaceful, neutral and humanitarian state, with peaceful, enlightened and democratically minded citizens. Theoretically it draws on the concept of metanarrative to explain how ideas of shared national origin translates in to a broad organizing discourse, that defines, interprets and communicates notions of what it means to be a Swede and what is needed to make claims on swedishness. Another concept, that of national bodyscape, is also used to further define and explain how ideas of nationality are embodied and take the form of specific characteristics and  personal qualities. The meaning-making in these two series makes use of the above mentioned definition of swedishness as defined by humanitarian concerns, democratic ideals and moral superiority to construct an image of the Swedish soldiers as on the one hand soft, humanitarians, who are needed in Afghanistan because of their especially strong sense of justice and moral, and, on the other, as tough soldiers, who are able to participate in every aspect of the war as fighters.