Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

In contemporary encryption the vast amount of text subject to cracking has brought about the demand for methods distinguish files more likely to be encrypted. The encryption software Truecrypt can encrypt files that are not possible to identify with a file signature. To solve the detection problem, an algorithm sensitive to the absence of structure in the very code of files was developed. The program was written in the programming language EnScript which is built into the forensic software suite EnCase. The essential part of the algorithm therefore deployes the statistic of a chi-square test for deviance from a uniform distribution to distinguish files with contents that appear to be random.

With the digital revolution within video games, the need for Digital Rights Management (DRM) has increased significantly, alongside with the increasing problem of copyright pirates. To counter pirates, DRM was created to prevent illegal copying of software, this to ensure that the Distributors received an income for their work. DRM has, since the start of its use, been getting, a lot of bad criticism from the users of the software protected by DRM. The main function of this paper is to describe the creation and development of DRM by analysis of the vision of different groups on this phenomenon. The main questions are as follows, is it possible to define the very reason for why DRM was created and if so, can its development through time be defined too? What differences in opinions are there when it comes to DRM, counting the two major groups of creators, sellers, distributors (referred to as distributors) versus individual users (referred to as consumers)? In what way will the research results suggest that the future DRM will develop?The development has gone from solving puzzles in a handbook to start the game each time the user wants to play, to serial numbers that is needed during the installation of the game.

Requirements management is an important part of the software development process. The success of a project may depend on how this is handled. Even though several research studies indicates that more attention should be paid on non-functional requirements, the primary focus in practical projects still regards identifying functional requirements. Especially the prioritization of the non-functional requirements has been proven to be of great importance for the success of a project.This report investigates basics in agile requirements management involving opinions from experts from a software development company. This is done with help of existing literature and interviews with key actors involved in prioritization at the company.

This thesis considers the development of the software for an, newly developed, embedded real-time control system, based on a Periferal Interface Controller (PIC). The control system is developed to be used for several different applications. In this thesis work, software for two different applications are developed. The first task is a time controlled system, while the other task is implementation of aPI-/PID-controller. A user interface is also developed and implemented.The time controlled system is an automatic horse feeder, which is used for feeding horses at certain predefined points in time.

Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

This report explains the need to develop a configuration manager that handles transmission equipment which exists in the Swedish Defence telecommunications network. The configuration module will display the configurations and compatibility among the equipment and their software which are all part of the network.Also included in this report are tools, methods and results for the development of a prototype for the configuration manager. The prototype consists fundamentally of a database assisted by a user friendly website.The transmission equipment handles a lot of important transmission of information and is in the hands of a department of SAAB, OFGCA, by orders from the Swedish Defence Materiel Administration (FMV). Within the work included in this order exists a continuous update of both software and hardware which the equipment consists of. Therefore it?s highly important that there is a monitoring of which of the software and hardware is compatible with one another, ensuring that the functions of the system work properly.The consistent updating has resulted in compatibility issues between components and because of this, a need for a configuration manager has arisen..

The majority of free content on the internet is financed by online advertising. A requirement for thismodel to work is that the visitors see the ads. The emergence of ad-blocking software has shifted thepower from the advertiser?s choice of publishing ads to the consumer?s choice of viewing ads. Weexamine the consumers? opinions regarding the use of ad-blocking software and compare them to theopinions of companies using online advertisement.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

The exclusion of visually impaired from the information flow presented to us through signs was what led me into this project. With a growing amount of information being presented to us on signs and digital information surface the need of communicating this information in a way that could be read by visually impaired is evident. Looking into different ways of communication, my goal was to create something that filled the need of the visually impaired without branding them as disabled. Having a close relative with bad eyesight is became evident on how much it limited her in her everyday life, not being able to navigate herself without the support of her husband. Through interviews with her and others with varying diagnoses I reached an insight in their situation. To my surprise they still favored a visual form of communication before an auditory or tactile form, because it?s easy to survey and quick to interpret.

Open source is growing outside the boundaries of hackers, amateurs and software development, creating a humongous potential in many different areas and aspects of society. The intrinsic and extrinsic motivations that drives open source have been in the subject of much research recently, but how they affect each other when paid and unpaid contributors come together is still hidden in obscurity. In this study I investigate how intrinsic and extrinsic motivation correlates with each other and how those correlations affect paid and unpaid open source software contributors. The literature synthesis is based on of systematic reviews through searches in library databases, identification of articles by searching on the Internet and by reading relevant books. My results indicate that intrinsic and extrinsic motivations continuously affect each other and that paid contributors are more vulnerable since their extrinsic motivation in terms of money is reached only when many other motivations are fulfilled.

The earmould acoustics affect the amplification that the hearing aid is programmed to give to its user. It is therefore important that the choices made for the earmould are correctly done. One choice is regarding the shape of the soundbore that affects the frequency response of the hearing aid above a certain cut-off frequency. The purpose of this project was to measure the frequency response when altering the shape of the soundbore in the earmould. Additionally, the aim was to examine how the frequency response is affected when the shape of the soundbore is not set or is not possible to set in the software when programming the hearing aid.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant. By also documenting how much time we spent involving users we will show to which degree user involvement is effective. We found out that a couple of fast techniques could get very much result in the form of usability enhancing suggestions to the developers.