The sludgebark and to a certain extent the bark were until a decade ago waste products without any economic value that were thrown away. A number of environmental laws and increcing energy prices have improved the prerequisites for increasing the use of these materials. At Seskarö sawmill they burn the sludgebark and a great deal of the bark in the sawmill furnace. The sludgebark has a number of disadvantages compared to bark during burning. The sludgebark is often wet which means the energy net from burning often gets low.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

MYDATA automation AB is one of the leading companies in development of surface-mountingtechnology and stencil free solder paste applications. MYDATA?s MY500 is a jet printerdesigned for solder paste application on printed circuit boards. The jet printer contains a cassettewhich consists of a holder and a cartridge. There is also a calibration unit which monitors andcalibrates the application of solder paste.

The global spread of the Internet has enabled busniesses and consumers in all industries to be better informed. Consequently, the buying process has appeared to become different from what tratditional models implies. As the buying behaviour among customers is evolving, selling companies are responding to this change. This thesis evolves around the consequences that the developing relationship between buyer and seller in business-to-business companies has led to. The topic in focus is the buzzword and phenomena "content marketing" with its marketing and selling strategy.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

Severe floods caused by heavy autumn rains in year 2000 raised the question whether measures to reduce the damage from high water levels, in the area surrounding lake Glafsfjorden and along the river Byälven down to lake Vänern, are possible. One option is to reduce flow resistance along the river and thereby lower the maximum water level a given inflow would cause. Good knowledge of hydraulic and hydrological conditions is necessary in order to estimate the effect of such flow-reducing measures. In order to quantify such effect a 1-dimensional hydraulic flow model has been set up for the river Byälven using the software package MIKE 11. The model is more detailed, especially concerning topography and bathymetry, than earlier models used for studies of the river.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

Common species of freshwater mussels may, like the freshwater pearl mussel (Margaritifera margaritifera) have a drastic decline in number and there is several reasons, like sedimentation, a decline of host fishes, introduction of alien species, nutrition leakages from agriculture and pollutants of medic drugs and poison. Ann Gustavsson made in the year of 2007 a study over rejuventation of freshwater great mussels in nine watersystems and considered that the rejuventation within the populations were all along the line poor. This study orients from her work and points to determine if there is a connection between the poor juventation and pollution of nitrogen and phosphorous from industries and private sanitations. The study was performed with the software program ArcGIS9.2 to take out drainage areas for the concerned habitats and contact was made with the concerned authoritys. When it comes to supervision of private sanitations is it the countys and for industries is it the county administrative board.

Safe operation of a large synchronous power system as Nordel is not an easy task.There are several aspects to take into consideration. This thesis focuses on the problems due to voltage collapses in a transmission system.The ability to foresee an upcoming collapse is vital to maintain stable operation of the grid. The grid operator at Svenska Kraftnät (SvK) uses the computer program SPICA to predict the maximum transfer limit at specified transfer sections. SPICA uses actual states from the grid to predict the transfer limitation, and a quarter later a renewed estimate is produced and so on. This means that the operator can se his transfer limits vary every fifteen minutes.Our task in this project is to validate the accuracy of the limitations obtained by SPICA.

AimThe aim of the study was to develop a method for the survey of play movement demands and temporal patterns in order to enable a descriptive study of the defensive players in American Football. The overall aim was to  improve the understanding of how American Football is played to create opportunities for enhancement of current or developing new training methods to better suit football.MethodFifty plays from a Division 3 college football game on video from 2005 was divided into sequences of action for one player each from the defensive line, linebackers and defensive backs and analyzed with the video analyzing software cSwing. Every players sequence of action was recorded in a spreadsheet and noted on a scaled football field where distances were measured and together with time stamps from cSwing velocity was calculated.ResultsUsing this method it was possible to describe the play movement demands and temporal patterns which was the main task of the study. The defensive end worked on an average 4.61 seconds per play, the distance was 12.4 meters and average speed 2.5 m×s-1. The linebacker worked on an average 4.35 s per play, 13.7 m and at a mean speed of 3.0 m×s-1.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

Today the human being see energy as a matter of course but the resources that is used for extract energy is today not enough for the world demand. Of all the energy that is used in Sweden today approximately 40 % goes to the building stock. This number will most likely increase if not necessary actions will be made on the already existing building stock since new houses constantly are built which will be added up on the already existing energy supply. This takes cause of action on the already existing building stocks, to fulfill the demands of the future use of energy that has been set by the authority. At the same time the thermal conditions cannot be influenced by the necessary changes that must be made.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

The aim of this thesis is to analyze the academic discipline translation studies; the analysis centers upon bibliometric aspects, and is carried out chiefly by means of quantitative methods, enabled by the databases Web of Science and Scopus as well as by the corpus-linguistic software Wordsmith; however, this quantitative focus is complemented by auxiliary qualitative means of investigation, i.e. a discourse-analytically oriented study of a corpus of domain-endemic reviews.A number of core journals are analyzed in order to show what and whom are cited in translation studies, and, furthermore, what adjacent domains hold sway over it; attention is also given to influential authors, regions and languages operating within the domain. It is shown that the domain under scrutiny is quite differentiated, even fragmentary; the term pluricentric is used to describe this tendency towards sprawling. No superior authors (in terms of publication frequency) emerge, which arouses the suspicion that the domain may be conditioned by a hierarchical divide between journals and monographs. Furthermore, it is clear that translation studies is a eurocentric domain: European languages dominate.