Uppgiften för examensarbetet har varit att göra en bestämning av ammoniumhalten ibiogasslurry med hjälp av jonkromatografi. Resultatet från analysen har sedan jämförtsstatistiskt för att bland annat se repeterbarheten för metoden. Metoden har även jämförts medden spektrofotometriska metoden som finns på Sobacken, så kallad Langemetoden.Ammoniumhalten är en parameter som påverkar biogasbildningen i rötkammaren och det ärdärför viktigt att denna hålls låg.Jonkromatografi är en separtionsmetod som bygger på jonbyteskromatografi. En separationsker i en kolonn innehållande en stationär fas och genom den flödar den mobila fasen ochäven provet. Den stationära fasen och eleuenten har olika laddningar, för katjonkolonnen ärden stationära fasen negativ och den mobila positiv.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

Most of the saw and pulp industries have stored wood nearby their production, the main reason is to have a continuous wood flow to the production. Wet storage of wood is of great importance to keep the wood quality. Without water sprinkling the risk of drying outand decomposition through biological activity increases significantly and will result in a negative effect on future production and quality. One drawback of wet storage of wood is the leaching of chemical substances into the surrounding recipient. The log yard run-off contains phosphorus, nitrogen, phenols and organic substances. These substances can cause problems for the surrounding environment. The main objective of this project is to gain an understanding of the wet storage used by the Swedish wood industry and estimate the environmental consequences that run-off water will have on the recipient.

The production of ferrochromium alloys at Vargön Alloys AB contributes to formation of unwanted ferrochromium dust, which contains toxic Cr(VI). The dust is since summer 2005 treated with an iron-sulphate solution to reduce Cr(VI) to the non-toxic Cr(III). A year later the treatment technique was improved and disposal occurs in cells on the landfill. The cells can be up to 300 m3 and the edges can be made out of fro example concrete. Tests are conducted on the treated dust when it is disposed.

Avloppsreningsverk står inför uppgiften att rena inkommande vatten för att möta lagstiftade gränsvärden till en så låg kostnad som möjligt. Att syresätta biologiska reningsprocesser är kostsamt eftersom luftningsanordningen förbrukar mycket energi. Ungefär en femtedel av Himmerfjärdsverkets totala elenergiförbrukning går till luftning av biologiska processer.För att öka Himmerfjärdsverkets energieffektivitet startades under 2010 experiment med olika strategier för luftflödesstyrning. En av verkets nitrifikationsbassänger byggdes då om för att möjliggöra zonvis reglering av syrehalten.Syftet med denna studie var att utvärdera reglering med ammoniumåterkoppling och syrehaltsprofil för styrning av Himmerfjärdsverkets nitrifikationsprocess. Utvärderingen baserades på reningsresultat och energiförbrukning.Med nuvarande reglerstrategi varieras luftningen genom återkoppling från syrehalten i den andra av sex zoner i varje luftad bassäng.

Pomace is the solid remains (i.e. stems, pulp, seeds, and skins) after pressing for juice. The annual production of apple pomace is 593 000 ton worldwide. Its field of application depends on local conditions. In order to investigate the field of application of apple pomace in the Southern Sweden, six persons on companies with production of apple juice were interviewed.

Wastewater treatment is increasingly controlled by the Swedish environmental quality objectives, adopted by the Swedish parliament. There is a need for a sewage system that can fulfill stringent requirements concerning the environment, recycling and resource use and hygiene. Additional environmental aspects in recent years are the impact of climate change, new knowledge about the effects of pharmaceuticals in water, the need for improved wastewater treatment and increased recycling of nutrients to agriculture. This report has, from a future scenario of the year 2050, analyzed seven different systems for wastewater treatment and treatment of compostable biowaste from households in Eskilstuna. A future scenario was chosen based on that within a forty year period new challenges may arise which can result in higher demands on sewage treatment than those we see today. Another reason why the future scenario was established is that changes in wastewater treatment systems are slow to establish. The analysis is mainly focused on the economical aspects but environmental aspects such as emissions to receiving waters and potential recycling of plant nutrients has also been evaluated briefly.

Fukthantering är idag, trots god kunskap inom ämnet, ett stort problem inom byggproduktion då tunga betongstommar ska torkas ut under pressade tidsplaner. Det finns en uppsjö av beräkningsmetoder och hjälpmedel, exempelvis ByggaF och Torka S. Däremot finns inget enkelt sätt att kombinera uttorkning, energiåtgång och kostnader som är användbart i produktionen.Miljön är kanske ett av det här århundradets största samhällsproblem. Lokala brister kan få globala konsekvenser och för att bygga ett hållbart samhälle måste detaljnivån studeras. Byggbranschen är en stor energibrukare där stor vikt på energibesparingar läggs i förvaltningsskedet, medan det försummas i produktionsskedet.

BIOGAS POTENTIAL IN GRASSES FROM WETLANDSMarvin MartinsThe purpose of this study has been to survey wetlands that are suitable for mowing and to analyze the biogas potential in the harvested grasses. A preformed investigation showed that there are suitable wetlands, which can be harvestable, namely those mowed formerly in traditional haymaking. The practice of traditional haymaking is dying out in Sweden today but there are several good reasons why it should to be reconsidered. Nature- and cultural values are obvious, also the unutilized energy in the grass.The suitable types of wetland that were specifically studied were the productive wetlands; meadow marshes and wet meadows. These wetlands are represented in the Swedish meadow- and pasture inventory database; (TUVA) and the Swedish national wetland inventory (VMI).

This master thesis in energy optimization was made during the autumn of 2006 at Käppala wastewater treatment plant in Lidingö, Stockholm. A preceding thesis, where all electricity consumption was mapped, showed that the aeration in the biological treatment is the single largest consumer in the plant, and it is therefore of interest to reduce this cost. The oxygen control strategy used at Käppala WWTP is working well from a nutrient removal point of view, but not from an economic one. The last aerobic zones have a very low oxygen consumption during low loading periods which give rise to enhanced dissolved oxygen concentrations with excessive costs and reduced denitrification as a result. But also during periods of normal loading unnecessary high oxygen concentration are sometimes given.By modifying the aeration control strategy three full-scale experiments have been made, with the intention to reduce the air consumption.

In this thesis, the flows of reactive nitrogen (Nr) in Scania were investigated and quantified. The thesis was also intended to form a basis for comparison between the urban nitrogen flow and other flows of nitrogen within Scania. The management of nitrogen in society has disturbed the natural nitrogen cycle. This is linked to a series of environmental problems such as eutrophication, acidification, global warming and smog. The method used was Substance Flow Analysis (SFA) for Nr. For calculation and flow charts Scania was divided into three subsystems; air, water and society.

This report was written by Sofia Ericson and describes the degree thesis with the title: ?Connections between the growing site of bio fuel, the chemical composition of bio fuel ash and the deposit growth in a bio fuel fired boiler.? The purpose of this degree thesis was to avoid melted deposit growth in the bio fuel fired boiler at ENA Kraft in Enköping. Potassium and sodium are known to lower the melting point of bio fuel ashes and are therefore not wanted in the trees in higher amounts than necessary for the growth. Silicon is also known to be important for the deposit growth but it is not possible to say in general if higher or lower contents of silicon is better. The relation between silicon and other chemical substances is more important than the total amount of silicon.

In the pilot plant at Hammarby Sjöstad, Sjöstadsverket, several new methods are tested in order to achieve a good use of resources. When a new technique is considered it is often the performance of the technique itself, under given conditions, that is evaluated. However, in order to evaluate the overall function the whole picture is needed. With a system analysis it becomes possible to make a comparison where all the positive aspects are put up against the negative ones, for the technique itself as well as its requirements. In this way the influence that minor components have on an entire system can be considered.This report presents a system analysis of an anaerobic membrane reactor (MBR) with a VSEP-membrane (Vibratory Shear Enhanced Process).

Blast furnace is the heart of every steel plant. Steel production is based on the blast furnace process, as it is where the iron is extracted from the iron ore and turned into liquid iron, which will subsequently be used to make liquid steel. Therefore, without hot iron, steel can not be produced. Blast furnaces in this process are supplied among others with pulverized coal. Raw coal should be prepared for the blast furnaces in the form of fine coal powder.