We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

The objective of this M. Eng. Diploma work was to validate the new version, CASMO-5M, and compare the results with CASMO-4E, by using the same input in both programs. The tasks that were included in this work was to compare TIP-measures, k-effective curves (warm), k-effective curves (cold), the effect of void on k-effective, the isothermal temperature coefficient (ITC), the moderator temperature coefficient (MTC), damping ratio calculations, internal effect in a fuel bundle of a BA-rod, the speed of BA-out burn, impact of xenon, falling control rod, margins and isotopes.The TIP-measures showed that the differences were small for all reactors, at most, 6% nodal improvement by C5M (Casmo-5M) for Oskarshamn 3. The warm measurements of k-effective showed that C5M had a higher value for all cycles of Oskarshamn 1, 2 and 3 in comparison to C4E (Casmo-4E).

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

In Sweden, grass is the single largest crop grown. Nearly 1 000 000 Ha grows on the fields, this is primarily used as feed for livestock. To get a good seed, you need to handle the crop carefully from planting to delivery. The part that I have been interested in, is how to dry the harvested seed with out destroying the growth in the small seed. This is very easily done if you aren?t careful during the drying period.

The wide distribution range of our boreal pine (Pinus sylvestris L.) provides a great variation in growing conditions and climate/weather factors that influence the wood development of the trees. A great number of extensive studies have been conducted over the years in order to clarify growth trends of this and other species over more or less wide-ranging areas. In this thesis effects of weather factors were instead compared between different forest stands from the about same geographical location. The effects of precipitation, temperature and frost on the year ring characteristics of pine were studied in the research forest of Svartberget Vindeln, in northern Sweden. The stands differed in site index and silvicultural treatment; fertile ? high stem density, fertile ? low stem density, poor ? high stem density and poor ? low stem density.

Title in original language: En undersökning av tre olika behandlingsmedels effekt påvegetabiliskt garvat läder för bokbandLanguage of text: SwedishNumber of pages: 32.

In this study bone material from six stone ship settings and a total of seven deposits of bones from two sites on the island of Gotland have been analyzed. Four ship settings from the burial site at Gålrum in Alskog parish and two from Tängelgårda in Lärbro parish. The ships contained both cremated remains and inhumations.  Human remains were identified in five of the analyzed ship settings and a minimum of six individuals was identified in total.  Animals were found in three of the ship settings, where one of them contained only the burned remains of a dog. Two of the ships contained inhumations, one in Gålrum and one in Tängelgårda.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

Bakgrund: Att föda barn är en av de mest betydelsefulla händelserna i en kvinnas liv. Direkt efter förlossningen sker den första interaktionen mellan mamma och barn. Om barnet behöver avancerat omhändertagande bryts den första interaktionen. Tidigare forskning visar att interaktion och tidig hud mot hud kontakt mellan mamma och barn är betydelsefullt för anknytningen. För att kunna främja anknytningen och stödja den nyblivna mamman måste barnmorskan ha kunskaper i vad som påverkar mammors upplevelser av en separation med deras nyfödda barn.

Gerbera jamesonii is a plant with a large amount of pollen and various flower colours and a favourite host plant for Frankliniella occidentalis. The best growing temperature for gerbera is approximately 20°C. Frankliniella occidentalis or the Western Flower Thrips is a small insect that has become an important pest in greenhouse cultivation all over the world. The high temperatures in the greenhouse are favourable for F. occidentalis.

Cattle used for meat production can be held outside all year round and due to the legislation they should have access to shelters or other buildings for protection against the elements giving them a dry and clean bedding. There are different opinions concerning their need of protection and the question about necessity of shelters for cattle is of current interest due to a less profitable economy in meat production and the investment costs for shelters. The aim of this study was to acquire more knowledge about the natural behaviour of cattle concerning their use of shelters. The basis of the study was a series of questions regarding when animals choose to stay in shelters, if shelters were used less when they had access to protecting vegetation, how temperature and weather conditions affected the use of shelters and the influence of distance between shelter and feed. Behavioural studies was conducted at five different farms where six groups of suckler cows and heifers of following breeds and crossbreeds were observed; Aberdeen Angus, Charolais, Hereford, Scottish Highland Cattle, Simmental and the Swedish breeds SKB and SRB.

Cultural objects may become wet by deliberate water cleaning, water disaster or watersoaked for other reasons. Air drying textile objects and even other organic materials from awater wet state, involves many problems depending on the strong capillarity action of water.Damages and changes such as bleeding of dyes, stains or lines of impurities from watermovement, shrinking or stiffness can occur. Freeze-drying as an alternative drying methodhas often been used for wet archaeological and marine objects, but more seldom for historicalmaterials.This bachelor thesis addresses the issue of whether freeze-drying can be an alternative controlleddrying method for historic costumes. Costumes and related objects are often compositeobjects, consisting of multiple materials, as well as being three dimensional, all of whichwill complicate drying. The purpose of this study was to investigate whether it is possible tohandle costume objects after wet cleaning for drying by freeze-drying, and if damages due tosurface tension of water, can be avoided in this way.

The main purpose of this project was to make a survey of the steam and electricity consumption at Akzo Nobel Functional Chemistry AB and give suggestions of how to minimize them. These three different areas were focused on. First to make a survey of all the most important consumers, second to find the electricity consumption of the air compressors and the amount of waste heat produced from them. The third area was to calculate a model of how much fresh water that is used during a cooling sequence in the water based heating/cooling system of the reactors and give a suggestion of a suitable reuse for this water.The main result is a total survey of the energy consumption in steam and electricity. The survey shows that the second largest group after drying is heating of ventilation which gives big potentials of reducing the total steam consumption if there is a way of being self supporting in ventilation heat.

During the period called Little Ice Age (1400 ~ 1900) the climate of northern Europe was in an annual year-basis overall colder than it was before and after that period. The numbers of short, cold and rainy summers and long, bitter-cold winters where often repetitive under the approximately 500-years the period lasted. In Scandinavia, the coldest time during this period is estimated to have started around the end of the 16th century and lasted to the beginning of the 18th century. Trees growing at the tree-line are limited by temperature for their annual growth and hence showing differences of growth during changes in the climate,  a method called dendroclimatology. The variations of growth can be read in the tree-rings either by analyze the width of the ring or by look into the density of the wood and is used to reconstruct past climates.