Prescribed burning was commonly used for site preparation in Sweden to establish new forests until the 1960?s, when mechanical scarification was introduced. During recent decades the interest in prescribed burnings has increased again, mainly due to certifications of forestry stating that 5% of the regeneration areas should be burned on dry and mesic soils. The objective of the study was to evaluate actual influence of prescribed burning compared to other site preparation on stand stem density, growth parameters and tree damages for Scots pine (Pinus sylvestris L.) after direct seeding and planting. The study also attempts to simulate growth until first thinning.

The purpose of this thesis has been to assess whether leaching from one particular Swedishlandfill site, Skörbytippen, is contributing to elevated levels of heavy metals in a ditch runningfrom the landfill site to the lake Mälaren in the communal region of Håbo kommun. Since theditch is stretching approximately five km downstream from the landfill site, in situ observationsand maps with known points of inflow was utilized to determine appropriate test points for thecollection of samples.Soil, water and sediment samples were collected and analyzed for content of organic material, pHand conductivity. Data on plant-available elements and total amounts of heavy metals wasacquired through ICP-analysis.The results show that the Skörby landfill is currently in the methane-forming anaerobedevelopment phase, which indicates that the concentration of free and complex-bound metals inthe leachate water should be low due to chemical binding with other landfill compounds. The pHof the sediment samples was generally one unit higher than the soil samples and some of themeasured data, such as pH and conductivity, show that an environmentally disturbing dischargeof some kind of strongly alkaline chemical(s) has been made from Benders? takpanneindustri inclose proximity to the landfill.

The city of Kalmar has a desire that their 3D maps of the city should come to a greater use and get residents more involved in Kalmar city. The purpose of this report is to show one way to work with these 3D maps when it comes to presenting information about Kalmar for its residents and tourists in a specific area.  The report also includes information about advantages and disadvantages with the use of 2D and 3D maps in different environments. Various reports and other sources indicate an interest in 3D and a use for this, but even that 2D is still seen as a natural way to read a map. By collecting information from relevant literature, interviews and user testing, the group has obtained sufficient background information to present the results of a web site, where the visitor can navigate in both 2D and 3D in a specific area of Kalmar. User tests and surveys have been conducted in two rounds and the web site has been revised after their results..

The number of weaned piglets per sow and year is a good measurement of sow productivity since it is affected by the number of piglets born alive, the pre weaning mortality (i.e. mortality of live born piglets between birth and weaning) and the number of litters per sow and year. This measure is also closely connected to the number of piglets produced per year, which partly determines the profitability of the piglet producer. During this study, eleven successful piglet-producing herds were visited. Eight of the producers were Swedish and three of the producers were Danish.

This thesis has had its focus on ceramic shards found in a trench by the late neolithic western shore of the Ajvide site. The purpose of the thesis is to investigate if there are changes in the pottery between the test trench and the ceramics found by the graves, known as the main site. The author has compared the ornaments from the test trench with an ornament schedule made from over 50 000 shards from the assumed main site. Not only changes regarding ornaments has been noticed but also new techniques and raw material. The author has also implemented two 14C datings which backs his hypothesis that the shards from the test trench are younger than the shards that made the earlier ornament schedule.

Sveaverken is a company who manufactures products and equipment for the modern farm enterprise within grain, pork and horse businesses. A large share of Sveaverken's turnover depends on the role as a subcontractor for Delaval within the areas ventilation, manure handling and feeding systems. Sveaverken wants to investigate the possibility to increase sales by establishing new sales channels, for example e-commerce This thesis is an analysis of the Swedish farmers use of internet, attitudes towards e-commerce and Sveaverken's interest within this area. There is also a minor economic analysis of the cost of establishing the e-commerce site. The study focuses on farmers who are potential customers to Sveaverken within Sweden. To examine the farmers opinions about internet and e-commerce a questionnaire was developed and sent out in November 2006, to 500 farmers of which 45% answered. The results show that the average age of the farmers was 42,5 years.

The purpose of this thesis is to examine how e-commerce companies work with their relationships to customers. We have conducted a case study of two companies, Koll and Webbshoppen, both active in the e-commerce industry. Our empirical study has shown that it is important for e-commerce companies to create long-term relationships to their customers, but it can be difficult to create these relationships since the companies have little contact to the users of Internet. To build relationships, e-commerce companies market themselves through different types of media to create awareness. It is also essential to be situated high in search engines.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

The purpose of this essay is to acquire variables that explain and may be used as a base for wage estimation in the private sector in Sweden. The factors that are assumed to have an impact on wage estimation are based on earlier Swedish and international studies. Business survey data, which is based upon monthly questions to firms in various sectors of the Swedish economy posed by the Swedish National Institute of Economic Research, will be analyzed to find out weather they have an impact on Swedish wage settings or not. Tests including business survey data are yet rarely frequent, why this essay will be some kind of a pioneer within the area. To estimate significant factors that influence wage setting in Sweden, three different wage equations have been modeled and tested with a regression model.

In 1993 the internal market within the European Union was formed and ensured free movement of goods, services, capital and people. This led to the removal of trade barriers between members of the European Union. When opening up for competition, price differences between countries decreased and more jobs were created. A single currency was introduced by eleven countries in 1999 with the goal of reducing transaction costs, eliminating exchange rate risk and to further simplify trade. In 2001 Greece joined the collaboration and introduced the euro.

The IT industry is constantly evolving and it's more or less a requirement today for web developers to be familiar with and to be able to develop for all platforms. A technique that has taken hold and is now widely used is responsive design. Developing responsive design means adapting the layout to the viewing environment; the screen size. Another useful method when developing for different devices is the mobile first theory, which means developing for the mobile screen first. This is done to scale down the site and to clear unnecessary information in order to provide a better user experience.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

The field trial Exploatering av höga P-AL-tal (Exploiting P in heavily P dressed soils) started in 1982-1983 and included seventeen study sites placed across Sweden. Each site included three treatments, one unfertilized control (A), one aiming at replenishment of harvest removal, i.e. fertilized with 15 kg P ha-1 year-1 (B) and one over-fertilized (C) with 30 kg P ha-1 year-1. In this thesis data from the five longestrunning study sites are analysed based on four hypotheses. The hypotheses stated that in soils with high P-AL values and a pH over 6.0 P-AL will not decrease over time in the control (A) or in the replenishment treatment (B), that P-AL and P-HCl in the top soil will increase at all sites for the over-fertilized treatment (C) and that yields will not decrease as long as the P-AL is above 12 mg P 100 g-1 soil. My conclusions from the analysis of data from the selected sites are as follows: - A pH above 6.0 cannot guarantee a stable P-AL value in an unfertilized but phosphorus-rich soil. - The P-AL of unfertilized soils decreased faster at lower soil pH than at higher pH. - In the replenishment treatment (B) the rate of P-AL decrease seems to fall at a pH of 6.5. However, the influence of the soil type cannot be ignored. - P-AL and P-HCl did not increase in all over-fertilized treatments.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

During the transportation of logging residues (LR) the material´s low density is a problem that results in low use of pay-load capacity. Comminution or compression of LR are possible methods to increase pay-loads. In the present thesis studied a bundling machine which was mounted on a truck chassis, and the subsequent transport and crushing. The truck bundler created bundles that were larger and longer than other bundling equipment on the market. The objectives were to determine the total time consumption and its allocation over work element and machinery, to measure dry matter (DM) content of green and brown LR-bundles.