Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

This paper deals with the connection between food and burial habits during the late Iron Age in present-day Sweden. The archaeological material used in the study consists of 16 potsherds from a burial site at Alsike hage, Alsike parish, in the province of Uppland in east-central Sweden. On these potsherds have been conducted FTIR- and GCMS-analyses, in order to see what types of food have been deposited in the burials. Furthermore, the result of the GCMS-analyses has been compared to contemporary material from both burial sites and settlement sites, in order to establish whether differences between the compared materials exist. The analyses show that there are differences between the material from burial sites compared with the material from settlement sites, but not any particular differences between the material from different burial sites.

It has become increasingly common for cities and municipalities to take greater account of the place marketing, and to see the physical location as a brand. An early step in this process is to make the image measurements of the place, in order to develop better marketing strategies. A method often used in tourism research for this type of measurements is Etchner and Ritchie's theoretical framework. The framework is initially designed to measure visitor's image of a tourist destination.Almost all previous research in this area is based on the visitor's perspective, but Olofsson and Skredsvik have used this framework to measure a location's image among the residents. They feel that the residents of a place can be seen as ambassadors of the place because they know the site well.

This study was made to see too what extent Swedes uses consumptive resources such as berries and mushrooms, game meat and meat from fish in their household on a yearly basis. I have also looked into the difference between rural and urban areas in Sweden. Further aim was to determine what factors that correlates with the participation in berry and mushroom picking and the use of game and fish meat within the household. The study was conducted in form of a mail survey that was sent to randomly chosen persons in every municipality in the six northern most counties in Sweden and in the county of Stockholm. In addition a sample was sent to randomly chosen persons on a national level.The results showed there is a difference in use between rural and urban areas in Sweden in all 4 investigated consumptive resources.

Denna rapport handlar om hur företaget Parera AB ska kunna integrera tre olika system till en supportportal för deras tjänst Fjärrdrift. Tjänsten Fjärrdrift går ut på att kunder erbjuds fjärrsupport och driftövervakning av deras IT-miljöer. Uppgiften gick ut på att Parera ville kunna delge information till sina kunder rörande tjänstens innehåll och status på kundernas IT-miljöer, samt göra det möjligt för kunderna att sköta sina supportärenden på en och samma plats. För att genomföra detta behövdes en undersökning av de tre systemens funktioner och API:er göras samt ett förslag på lämplig plattform för implementationen tas fram. Ett delmål i arbetet var att undersöka huruvida Parera kunde erhålla något mervärde av att migrera sitt kundhanteringssystem till molnet istället för att stå för driften själva.Arbetet gick ut på att testa de olika systemen i daglig användning och utvärdera vilken information som skulle behövas för att kunna integrera systemen, samt hur respektive systems API:er kunde nås.

Strandskyddsproblematiken är startskottet för detta examensarbete. Det är en problematik som har sitt ursprung i strandskyddslagen, en lag som funnits i Sverige sedan 1950-talet. Lagen har alltsedan dess uppkomst väckt en rad känslor, den är både omdiskuterad och omstridd. På senare år har diskussionen om strandskydd blommat upp på nytt, det i takt med att kraven på strandnära boende har ökat samt att lagen har tolkats olika. Det har resulterat i att lagen idag står inför en förändring.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

Förändringsarbete är av en komplex karaktär, men en förutsättning för att företag ska kunna behålla sin konkurrenskraft. Det finns en mängd olika förändringsmetoder vars syfte är att effektivisera verksamheten. En av dessa förändringsmetoder är Lean som har sina rötter inom Toyota och dess produktionsmetod TPS (Toyota Production System). Lean syftar till att eliminera alla former av slöseri och därmed effektivisera en verksamhet. Studier visar på att företag i västvärlden har lätt att applicera verktygen och arbetsmetoderna inom Lean, men har svårt att ta till sig hela filosofin som ska genomsyra organisationen och dess kultur.Syftet med denna studie är att undersöka vilka de kritiska faktorerna vid en Lean-implementering är och hur dessa hanteras.

This project has been created with the assistance of Fredells. Fredells is a Stockholm based company with a focus on the retail of building products. Fredells also produces prefab- or prefabricated products which are either completely or partially ready for assembly the moment they arrive to the building site. These prefab-products are primarily delivered to customers within the Stockholm region. The building industry is a conservative market where the incentive to changes has been relatively low compared to other industries.

This thesis is ordered by Peab Sweden AB Regional Jönköping and concerns of warranty inspections.The intention is to work out a basis, which show the most common complaints is the warranty inspections, and make a small analysis on what causes them to be. The report also presents possible solutions to prevent the occurrence of defects. It also covers the issue of how the client looks at Peabs way to overcome the objections of warranty inspections. The report has the following issues:?What are the most common errors observed during the warranty inspection??What are the causes of complaints??What can be done to reduce the number of complaints??How the customer thinks that the complaints be addressed?Twenty-five Guarantee survey records from the projects Peab has done in recent years has been the starting point for the investigation.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

The objective of this study was to uncover what aspects of urban plazas and parks that are most important for users? evaluations of places? aesthetics and microclimate (the characteristic climate for a limited space). This was done by investigating people?s general ideas of plazas and parks (the prototypical concepts) and compare these with place users? descriptions of four specific places. Interviews with two groups (31 and 24 persons respectively) were carried out in order to collect this information.

Hidden away in the pristine landscape on the northeast shore of the Dominican Republic, the remote village of Miches is on the verge of shifting its economic resource base from traditional fishing into what could become an international model for sustainable tourism. The aim of this thesis was to produce a vision of a waterfront park near the center of the village; demonstrating concept-based landscape design that reflects the goals of sustainable development originating from the local incentive structure. A composite landscape analysis and design concept both served to inform and guide the design work, which was executed through model building, hand drawings, and production of a visual presentation in the format of an architectural competition entry. The design concept, All invited, signifies the distinction between the development that is about to take place in Miches and the otherwise common all-inclusive resorts, where tourists are set apart from the local community and spend most of their time within the fenced-off premises of the hotel. All invited also captures the typical Dominican hospitality, and mirrors the aspirations of turning Miches into a safe and welcoming place for visitors. The result is a public park design that is equally inviting local residents as it is to tourists, and where the unique qualities of the site are emphasized without being exploited.

In the western world, strokes are the third most common cause of death, hitting mainly the elderly population. Smoking, high blood pressure, diabetes and overweight are known risk factors for causing strokes. Previous studies show that an increased level of particulate matter, PM, is also related to an increased number of strokes. The population in this study consists of patients over 65 years old who live in Malmö. Levels of particulate matter were measured from October 2004 to April 2005 at a central outdoor monitoring site in Malmö.