During consultation procedures between forest owners and the Sámi, data on, e.g., reindeer lichen biomass on the current site is needed. Hitherto, the existing methods of measuring lichen cover and biomass has been either objective methods such as the Point Intercept method, which is time consuming, or some sort of subjective visual estimation, which is faster but less accurate. However, both these methods are sensitive to different observers and/or to different inventories. This paper addresses the further development and evaluation of a photographical inventory method that uses colour distribution in images to estimate lichen biomass. During the autumn of 2011 six different locations, with different grazing pressure and lichen cover, in Norrbotten county were inventoried using both the Point Intercept method and the photographical method, complemented with collection of biomass samples.

To investigate effects of nitrogen on in-lake CO2 and CH4 production during winter, three pair of lakes was subject for a fertilizing experiment in which one lake in each pair was fertilized with nitric acid (HNO3) directly into the water column in the summer of 2012. The lakes in each pair are assumed to be morphologically, hydrologically and biologically similar, that is, the non-fertilized lakes are considered references. The pairs do differ in one major way by being progressively less humic, going from around 25 mg/l to 10 mg/l DOC. Sampling and analysis was carried out at the end of the frozen period in 2013. Results show a significantly higher concentration of both CO2 (p<0,001) and CH4 (?=0,1, p=0,053) between impact and reference sites in the two less humic pairs.

The city of Kalmar has a desire that their 3D maps of the city should come to a greater use and get residents more involved in Kalmar city. The purpose of this report is to show one way to work with these 3D maps when it comes to presenting information about Kalmar for its residents and tourists in a specific area.  The report also includes information about advantages and disadvantages with the use of 2D and 3D maps in different environments. Various reports and other sources indicate an interest in 3D and a use for this, but even that 2D is still seen as a natural way to read a map. By collecting information from relevant literature, interviews and user testing, the group has obtained sufficient background information to present the results of a web site, where the visitor can navigate in both 2D and 3D in a specific area of Kalmar. User tests and surveys have been conducted in two rounds and the web site has been revised after their results..

The increased competition in e-commerce puts pressure on e-businesses which makes it even more important to influence the visitors on their e-commerce sites. An often overlooked marketing tool is atmospherics. With the increased focus on e-commerce from both traditional and new e-businesses this marketing tool becomes even more relevant. The aim of this thesis is to investigate how the atmosphere on an e-commerce site influences the customers' thoughts, emotions and behaviors. We examine the effects the level of stimulus on a website has on the customer's emotions, attitudes, intentions, behaviors as well as the relationship between these variables.

Prescribed burning was commonly used for site preparation in Sweden to establish new forests until the 1960?s, when mechanical scarification was introduced. During recent decades the interest in prescribed burnings has increased again, mainly due to certifications of forestry stating that 5% of the regeneration areas should be burned on dry and mesic soils. The objective of the study was to evaluate actual influence of prescribed burning compared to other site preparation on stand stem density, growth parameters and tree damages for Scots pine (Pinus sylvestris L.) after direct seeding and planting. The study also attempts to simulate growth until first thinning.

The city of Kalmar has a desire that their 3D maps of the city should come to a greater use and get residents more involved in Kalmar city. The purpose of this report is to show one way to work with these 3D maps when it comes to presenting information about Kalmar for its residents and tourists in a specific area.  The report also includes information about advantages and disadvantages with the use of 2D and 3D maps in different environments. Various reports and other sources indicate an interest in 3D and a use for this, but even that 2D is still seen as a natural way to read a map. By collecting information from relevant literature, interviews and user testing, the group has obtained sufficient background information to present the results of a web site, where the visitor can navigate in both 2D and 3D in a specific area of Kalmar. User tests and surveys have been conducted in two rounds and the web site has been revised after their results..

This thesis has had its focus on ceramic shards found in a trench by the late neolithic western shore of the Ajvide site. The purpose of the thesis is to investigate if there are changes in the pottery between the test trench and the ceramics found by the graves, known as the main site. The author has compared the ornaments from the test trench with an ornament schedule made from over 50 000 shards from the assumed main site. Not only changes regarding ornaments has been noticed but also new techniques and raw material. The author has also implemented two 14C datings which backs his hypothesis that the shards from the test trench are younger than the shards that made the earlier ornament schedule.

All products will eventually end up as waste, which in a sustainable society has to be handled in an efficient and environment friendly way. This report focuses on waste fractions meant for combustion, often difficult to characterize. However, more homogeneous fractions that are treated biologically are also discussed.The study concerns the region of Borås, Sweden, where the waste plant Sobacken has provided a good starting point. On this site, fuel to the Energy-from-Waste plant of Borås Energi is prepared and the biological waste is treated through anaerobic digestion.One important part of the study has been to collect experience-based knowledge from the technical staff at Sobacken and Borås Energi. This information was compiled into an overview of wanted and unwanted fractions to the preparation plant and the boilers respectively.

The purpose of this thesis is to examine how e-commerce companies work with their relationships to customers. We have conducted a case study of two companies, Koll and Webbshoppen, both active in the e-commerce industry. Our empirical study has shown that it is important for e-commerce companies to create long-term relationships to their customers, but it can be difficult to create these relationships since the companies have little contact to the users of Internet. To build relationships, e-commerce companies market themselves through different types of media to create awareness. It is also essential to be situated high in search engines.

The IT industry is constantly evolving and it's more or less a requirement today for web developers to be familiar with and to be able to develop for all platforms. A technique that has taken hold and is now widely used is responsive design. Developing responsive design means adapting the layout to the viewing environment; the screen size. Another useful method when developing for different devices is the mobile first theory, which means developing for the mobile screen first. This is done to scale down the site and to clear unnecessary information in order to provide a better user experience.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted.LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted. LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

Old industrial sites bear witness of the unsustainable industrial developments in the past. Today many of them stand abandoned and empty, old structures lacking function in our present society. We have in this thesis participated in a visionary student competition arranged by IFLA, International Federation of Landscape Architecture by developing a proposal based on a vision of how Stockholm can stimulate a greener development. We have done this by turning an unsustainable industrial site in the city into an ecological node; Arboretum Lövholmen. Our aim is to develop an entry for IFLA?s visionary student competition by creating a new sustainable design for the industrial area of Lövholmen in Stockholm. We have worked with the following research questions: How can we create a visionary design proposal for Lövholmen that promotes sustainable development with the help of ecological design? How can the competition format be a design tool? How can the working process developing a competition entry progress? The competition demands have shaped our working process and functioned as a platform for the structure of this thesis.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.