This study was made to compare construction companies for gardens way to work with up following, with purpose to see if there was an efficient and not resource demanded system which gave much value. To achieve the purpose a case study was made. The delimitation for the case study was only to compare the work with up following on individual project. The delimitation on the companies in the study was from ten to sixty employees. That because to reach companies were it´s not the same person how calculates on tenders and than perform the projects. The study was delimitated to the west side of Skåne. T o be able to compare the companies and to find trends, an interviewguide was made and was used during the interviews with the companies.

The employer is obligated to call for negotiation on his own initiative, before he makes decisions in questions, which constitute important changes of the employer?s business or of the worker?s working conditions and terms of employment. The obligation to negotiate is reserved to the organisations, which the employer has collective agreements with. But what does the concept of important changes mean? What areas are included in the concept of important changes, according to legal framework and case law? How extensive is in fact the employer?s obligation to negotiate? The purpose of this report has been to seek answers to the above-mentioned questions, through partly describing how the employer?s obligation to negotiate has developed, and partly describing how the codes of negotiations in the Employment (Co-Determination in the Workplace) Act of 1976 are raised and applied.

Denna uppsats analyserar utvecklingen av principen Special and Differential Treatment (SDT) i den internationella handelsregimen. Fokus är på förändringen i tillämpningen av denna princip. Uppsatsen identifierar hur principen har tillämpats sen dess uppkomst samt hur ett skifte i det ekonomiska utvecklingstänkandet kom att utgöra en avgörande faktor för den nedgång i tillämpning som observerats. Vidare identifierar uppsatsen också hur nya dimensioner av världshandeln har skapat nya problem för utvecklingsländerna, vilket i sin tur har skapat ett behov av en fortsatt, men i många avseenden annorlunda, tillämpning av SDT-principen.Uppsatsen kommer till slutsatsen att det nya ekonomiska utvecklingstänkandet har suddat ut rationaliteten bakom det forna tillämpandet av SDT-principen. Samma utvecklingstänkande har dock lagt grunden för en ny tillämning.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

Purpose: The purpose of this paper is to examine if POC manage to keep cohort interplay between their identity and image.Theoretical framework: This paper is led from theories in area about communicating identity and image. The theories that are relevant to this paper to see the interplay between identity and image is communication theory and brand theories based on associations. From these theories we have composed a model that shows the communication led from identity throughout image in company?s with many distribution channels. It shows what associations that build identity and image and also the complication and threat that the interplay is being exposed to.Methodology: We have chosen to do this examination as a case study.

Relationship between social behaviour, feeding behaviour and performance of boars using single-space feeders A study on the behavioural patterns of growing boars is presented. The study was preformed at Quality Genetics? boar testing station Månseryd in Sweden. The boars were purebred Yorkshire, Hampshire or Landrace, born in nine different nucleus farms. The study is based on two batches of boars, with 63 and 69 boars respectively.

The aim of this political scientist paper is to describe and analyze the quasi state Iraqi Kurdistan 1992-2006 using the theory of Kolstö about how and why quasi states develops and the theory of Pegg regarding how the international society deal with quasi states. A qualitative case method is used. In the study the two theories are combined. Iraqi Kurdistan is used as a case to study to confirm Kolstö?s and Pegg?s theories.

Denna uppsats bygger på empiri kring ett case som utgörs av en dold konflikt mellan endel av surfkulturen i Varberg, Apelviken och Varbergs Kommun. Vi upplevde att detfanns en uppdämd konflikt som av olika orsaker blivit hindrad att nå ut. Uppsatsens fokusligger på den narrativa kopplingen i författandet av en managementberättelse som utgårfrån en case study.Vi bjuder Dig som läsare på en berättelse i vildavästernmiljö som handlar om livet i dennordamerikanska staden Coastville. På vintern är det mestadels kallt men undersommartid samlas både människor men också? problem.

I denna rapport behandlas frågor som rör extern validering och datorstöd (CASE) för detta. Rapporten redogör för en undersökning vars syfte är att ta reda på vilka krav som tekniker för extern validering ställer på CASE-verktyg och hur verktygen svarar upp till dessa krav. Olika metoder finns för att skapa ett informationssystem och varje metod har sina beskrivningstekniker som underlag för extern validering.De beskrivningstekniker som föreskrivs i en metod är ofta mycket detaljerade. En metods notationen ställer därför stora krav på CASE-verktyg som uttalar stöd för denna metod.Arbetet som beskrivs i denna rapport identifierar krav på datorstöd utifrån en viss metods beskrivningstekniker samt ytterligare valideringstekniker som beskrivs i litteraturen. Därefter undersöks CASE-verktygs förmåga att svara upp till dessa krav.Själva undersökningen av verktygen genomförs via ett testförfarande där samtliga utvalda verktyg implementerar två olika testfall.Resultatet från genomförandet av tester visar att det existerar stora skillnader mellan verktygens påstådda stöd för en viss metod och vad de faktiskt klarar av.

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

Uppsats för avläggande av högskoleexamen i Kulturvård, Trädgårdens hantverk och design 7,5 hp, 2014.

This thesis has examined the Tekla Structures modeling software and answered the question of whether it could act as a suitable modeling program for the design department at Bjerking AB in Uppsala. The method used in this work is a case study of a previous project with existing basis to work form. The demarcation of the study was to examine only the usability of the foundations of in situ concrete. The work examined three main areas within the design process. The first was to model the concrete elements then to model the reinforcing and ultimately production of the drawings. Because Autodesk Revit was the existing modeling program in the Department conducted the evaluation as a comparison between the two programs.

The aim of this thesis is to examine the customer profitability in a wholesale company. A case study of Eugen Wiberger AB has been conducted. Firstly the authors have examined the current perception of the company regarding their customer profitability and the results of their calculation of the customer profitability. Secondly an Activity-Based Costing analysis has been performed and has been compared to the perception in the case company. The conclusions are that the smaller customers are the least profitable, and in some cases unprofitable, whereas the larger customers are profitable.

The price of Swedish forest properties has gone up by 77 percent during the past five years. Amongst private forest managers the high price level signals optimism and confidence for the future. Many forest owners manage large capital in the forest and a planned economy is to a larger extent demanded to achieve a positive economic result. Forest is long-term and to maximize a single year without planning for the years to come results in less optimization of the parameters available to achieve a favourable economic result. This case study investigates the investment of two forest properties situated in Götaland. The management of the forest has been planned for both properties during a period of ten years.