Technology evolves quickly, with innovative ideas growing everywhere. Still, no technology is anywhere near challenging the mouse and keyboard for navigation of your standard computer. This study focuses on comparing the traditional technologies of mouse and keyboard with the new technology of gestures - in this case Leap Motion - in purpose of finding how the usage differs and what the potential users want from the competing technology. The experiment was executed in a controlled environment, with as few external factors as possible. We found that although the test subjects found Leap Motion fun, the test subjects do not want to surf the web with gestures.

The thesis is about exploring possibilities for developing a standardised system solution for micro businesses, this since most of the micro business lack proper system solutions, a contributing factor of this is price and also incompatibility between the solution and the business itself. The system solutions we will refer to are solutions which task is to cover the most important needs that a micro business might have on their system. The main goal with this research is to see if this is possible, and if so, how the developers should think to take it further. We chose to do this by identifying the most significant of needs a micro business has when it comes to this type of system solution.In this thesis we will present three needs which were evaluated and brought forth through the analyses of various interviews and observations we had done during the study. The interviews took place at respective company with their employees and consisted both closed and open questions with our main focus on the open questions because we wanted to obtain as much information from the respondents as possible from several viewpoints.

At ABB LV Motors in Västerås the shaft is assembled into the rotor with a shrink fit. After athorough investigation of the assembly method, several factors that make the insertion of theshaft more difficult has been discovered. Some affect the assembly directly while others onlyhave an indirect influence. The investigation has shown that the radial play between the shaftsouter radius and the rotors inner radius might be too small which could lead to anunsuccessful assembly. For the larger rotors, the condition is the opposite, and the rotor mightmove compared to the shaft direct after the assembly when the rotor still is warm.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

Human-computer interaction is central for computer assisted development. The aim was to investigate the user experience of a new (U2) compared to an old (U1) computer system, within a cognitive psychology frame of reference. Six subjects, frequently using the system, participated in the study. It was shown that the new (U2) compared to the old system (U1) enhanced and supported more the users? system related procedures/tasks.

Through a case study at an IT company we have attempted to ascertain how a company's organizational culture affects its designers' way of working. By examining what ?type? of designers the employees are and how this is reflected in their work, we hope to have correctly determined what their organizational culture looks like and thereby have achieved a plausible result in our study.Aside from two interviews with the company's CEO, we also performed eight observations at the company, where we tried to blend in with the employees, to better determine their way of working together.We have found that the designers' trust in their own instincts has led them to rarely act on feedback from clients ? they only pick out the proposals which have a ?mainstream? potential. We have also discovered that their design approach is something they don't feel inclined to discuss amongst themselves. As it is often ?indescribable?, they go with their intuition and unspoken design conventions..

A degree project has been carried out at Motion Control, Västerås. The degreeproject ?Grafisk Skärm för Inbyggda System? have developed a first prototype of anembedded system with a display, a graphical user interface with touchscreen andpossibilities to communicate with external units.The work initiated with surveys of critical components. A technical specification forthe desired end product was developed. With the technical specification as support,design specifications for hardware and firmware were developed.After the specifications were done, a circuit diagram was developed and a circuitboard was made.

There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.

To reconstruct a building is a long-term investment for farmers and it is important that people with different qualifications are involved at an early stage for making the system adapted to the animals as well the animal keeper. Therefore, ethologists who can contribute with their expertise are needed to design the system and get it to function well for the animals.A Swedish farmer who planned to rebuild her stall for tied dairy cattle to a loose-housing system for recruitment heifers for milk production asked me as an ethologist to find a system which can be fit to her existing tie-stall barn for 30 dairy cows, considering the animal needs in terms of movement, social interactions and play behaviors, and to theoretically compare the system with other systems with respect to the behaviors mentioned.The theoretical comparison between different systems was made through a scientific literature review.In agreement with the animal keeper I set out to fit a system with feeding cubicles, a system with cubicles and a system with deep straw bedding to the barn. After measurements were taken and preliminary drawings were outlined it was found that only the feeding cubicle system was possible to fit to the barn.The space provided will limit the animals to perform some playing behaviors. To decrease aggressive interactions between animals even thought a limiting area it is possible to provide partitions between resources animals compete around to prevent that more than one animal can get success to the resource at a particular place at one time. To increase the animal movement in the system the water trays were moved to the outer wall instead of kept in contact with the stalls.Although this report provides guidelines for rebuilding, other competences regarding building construction and a pre-test of the suggested building solution according to Swedish legislation are needed before the rebuilding can start.The results are directed mainly to the owner of the barn, but the literature review can be used by other cattle farmers and might bring increased understanding of the possible effects of different building solution on the animals..

A geographical position and its social, cultural and political context as well as climate and specific physical characteristics define the scope for a landscape design project. This has become clearer for us in our master project where we have made a Design Program for the outdoor environment of Wollo University in Dessie, Ethiopia and analysed and reflected on the work and process. The aim for the project has been to design an attractive and functional outdoor environment for the Campus, based on the inventories and the needs and wishes of clients and users. But, the aim has also been for us as landscape architect students to gain a greater knowledge about landscape architecture and the design process by position ourselves outside our usual context. The method has been open and seeking where the site, literature studies, dialogues with people and our own experiences from the field study in Ethiopia has influenced the work. Wollo University is situated 400 kilometers north of Addis Ababa, in a mountainous landscape. It faces problems of heavy rainfall during the summer, soil erosion, a lack of essential facilities, and is still a construction site with empty spaces in-between buildings and infrastructure.

Holmen Skog is one of the largest forestry companies in Scandinavia and they depend heavily on a large network of forest roads for production and logistics in connection to their forestry operations. The company recently introduced a new system for planning of road management. The system will also be developed with the intention to facilitate the monitoring of actions performed by road contractors. This report will provide information to support future decisions regarding further development of the system, after its introduction. In addition to a presentation of results from interviews, the report also provides a smaller study of the different subjects associated with roads, process work and process development. The study is largely based on interviews with road contractors that perform work for Holmen Skog today.

I detta examensarbete utvecklas ett solcellsstativ i trämaterial. Ett idékoncept fanns somgrund för hur stativet skulle kunna utformas. Detta har vidareutvecklats, till färdigt systemanpassat för tillverkning.Resultatet blev ett fackverksstativ i trä bestående av vinklade halva oktaeder i rad.Trädetaljerna binds samman med knutpunkter i formsprutad plast, som med klämkraft hållerfast trädetaljerna. Knutpunkterna är konstruerade för att minimera åverkan på träet samtmotverka röta.Systemet är verifierat både genom beräkning, simulering och jämförelse med liknandekonstruktioner. Materilavalet är gjort med systematik enligt Ashby, Material Selection inMechanical Design.

BackgroundDiathermy is the most commonly used surgical instrument in the surgical area today. Diathermy is used in surgery to cut and coagulate tissue. The use of diathermy releases chemical substances in to the environment in the form of diathermy smoke. Research shows that these chemical substances pose health risks to both staff and patient exposed to the smoke. To protect the interdisciplinary, perioperative team from the smoke, smoke evacuation systems can be used.ObjectiveThe purpose of the study is to highlight the work environment of the perioperative team when working with diathermy smoke.MethodThe study is meant to be implemented as an empirical descriptive sample survey.

Varje år drabbas 30 000 svenskar av stroke, vilket innebär stora personliga omställningar och stora kostnader för samhället. Den mest effektiva behandlingen, trombolys, måste ges så snart som möjligt för att ha god effekt.  Samtidigt som det är av största vikt att ta reda på om patienten har några differentialdiagnoser som gör behandlingen riskfylld.Den här studien undersöker hur strokekedjan går till och vilka faktorer som påverkar beslutsfattandet. Studien är baserad på etnografiska fältstudier på fyra svenska sjukhus och materialet är analyserat med metoder från sammansatta kognitiva system och målorienterad design. Resultaten visar att trots olika organiserade strokekedjor på de olika sjukhusen är processerna desamma och direkt kommunikation är mest framgångsrik för att effektivt sprida information mellan dem. Neurologjouren är viktig roll som, liksom resten av aktörerna i strokekedjan, ständigt balanserar sitt beslutsfattande mellan effektivitet och grundlighet.

Färg och ljus används som upplevelsegeneratorernyckelord: upplevelse, färg och ljus.