Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

With the elevated oil prices of today it is necessary to look for other heating alternatives. If the oil price continues to develop in the same way it has done the last years it will soon be impossible for many producing garden companies to survive. The purpose of this diploma work is to compare three different fuel options in order to find the most economic one considering the conditions of Katrinebergs Handelsträdgård AB. In relation to oil it is profitable to change to any of the three alternatives: wood chips, wood pellets and grain. The most profitable option is to change to wood chips. This alternative has a payoff time less than three years and after that the annual saving compared to the oil is relatively high. The annual cost is 65 % of the cost of the oil alternative.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

The study was carried out as a time study of five wood chippers placed on trucks,so?called huggbilar. They are trucks with built?in wood chipper, chip bowl and crane pulling a chip trailer. The system is used for chipping wood fuel, transporting, and delivering the chips to heating plants.

During the last few years the harwarder has developed from a prototype into a market product. Holmen Skog owns two harwarders and uses two more owned by entrepreneurs. In previous studies it has been shown that the harwarder was a slow and expensive forwarder. In this study the unloading at road-site was studied. The goal was to describe the differences in time consumption between unloading two-sided or single-sided (only from side of the road) and also the difference between unloading with three and four assortments in the carrier.

I Sverige används begreppet ?single responder? som beskrivning på en sjuksköterska som ensam bemannar en utryckningsregistrerad personbil, utrustad som en ambulans men utan bår. Uppgiften är dels att vara tillgänglig för akutuppdrag genom att vara strategiskt utplacerade geografiskt, och dels för att avlasta de traditionella akutambulanserna genom att utföra bedömningar av patienter där exempelvis larmoperatören har svårt att avgöra hjälpbehovet. Att bedöma patientens tillstånd och vårdbehov kräver både kunskap och erfarenhet. I ett ambulansteam kan det upplevas som en trygghet att ha en kollega som stöd vid medicinska beslut men också för att kunna vara behjälplig med olika praktiska moment.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

In this final thesis two simulation models have been integrated. The simulation models are models of JAS 39 Gripen?s fuel system, software and hardware. The time consuming and costly work to develop software has made the department of fuel system to build two models in Xmath/Systembuild. The software model also simplifies the comprehension of how the software in the control computer of the fuel system works.

The project is a thesis which intends to strengthen the form language and increase the user friendliness of an International Moth. This is a single handed dinghy with only one sail. It sails on two hydrofoils and receives a very high speed compared to its size, and are therefore often referred to as ?the Formula One on water ?. The result is a new concept where the aerodynamic forces have been used to stabilize the boat and relieve the hydrofoils.

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.

En betydande andel individer med bipolär sjukdom upplever kvarvarande, subkliniska symtom mellan egentliga sjukdomsepisoder. Sådana restsymtom är förenade med sänkt livskvalitet och förhöjd risk för återfall i sjukdomsepisoder. Syftet med föreliggande studie var att undersöka huruvida en kort, internetadministrerad behandling är genomförbar och kan ge en minskning av depressiva restsymtom, genom interventioner riktade mot sömn och emotionsreglering. För detta syfte användes en single-subject design med upprepade mätningar (n=4). Studiens resultat visar att behandlingen är genomförbar och att den, för vissa individer, kan ge en minskning av depressiva restsymtom.

Syftet med vårt examensarbete var att ta reda på om användning av Concept Cartoons, som hjälpmedel vid naturvetenskaplig undervisning, kan skapa elevdiskussioner som har sådana kvaliteter att det gynnar naturvetenskaplig begreppsbildning. Till grund för arbetet ligger Lpo 94, kursplaner och tidigare forskning. Undersökningen genomfördes i en skola i Östra Norrbotten och undersökningsgruppen bestod av 12 elever i år 5. Undersökningsunderlaget samlades in genom bandinspelningar av gruppdiskussioner, enskilda elevintervjuer samt observationer. Resultatet visade att enbart Concept Cartoons som hjälpmedel inte är tillräckligt för att skapa kvalitativa diskussioner.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.

Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.