To be able to move around without having to think about each movement is for most people amatter of course. Todays society contributes to a life at high speed where the sparetime is oftenspend doing somekind of sport, even extreme sports which earlier only a few people wheredoing. This leads to not only good health effects but also to more injuries. One of the mostcommon injuries is the knee injury.Capio Artro Clinic is a clinic specialized in sports medicine and particulary patients with injuriesin knee, shoulder, foot, hip or elbow. They perform a great part of all the crucial ligamentsurgeries in Sweden and has therefor also a lot of patients in need for rehabilitation of the knee.During the rehabilitation the load of the injuried knee is increased in steps.

Boberg at Scania CV AB. The purpose was to investigate the technical and customer oriented possibilities for the development of a transport security measure against cargo crime, which is a growing problem in Europe. The main goal was to develop a concept that is possible to implement in the Scania CV AB Fleet Management System. Another goal was to develop a security model that will be used as a tool during Scania CV AB?s future development projects of transport security concepts.The work was divided into three main parts: a background study, handling cargo crime, transport security Scania CV AB trucks and market analysis, a stakeholder investigation including a questionnaire and interviews, and a concept development session.

Aquatic organisms are usually not exposed to single substances but rather to mixtures of toxicants in streams located in agricultural areas. The transport of pesticides used in the agricultural area in Sweden is monitored with continuous environmental supervision every year. During 2002-2008 an average of 10 pesticides were found in each sample and 40% of the samples contained substances with concentrations higher than the Water Quality Standards. Chemical risk management is normally based on single-test evaluations. A problem when assessing mixture toxicities is that the constituents and concentrations of pollutants in the environment vary greatly.

As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

Reducing the CO2-pollution, resulting from the combustion of fossil coal for energyproduction, is important to affect environmental changes. One way to achieve a reductionis to use the oxy-fuel technology. The technology uses O2 and re-circulated flue gasduring the combustion which results in a flue gas mainly consisting of CO2. The flue gascould then be compressed and stored without environmental effects. A problem thatfollows from the compression is the risk of acidification in sensitive parts of the process.Acidification can occur because of reactions following from the contact of condensedwater and sulphur- and nitrogen-oxides which are also present in the flue gas.This report compiles and evaluates the basis of a scientific unit with the purpose ofexploring the possibilities of extracting impurities of SOx and NOx from the flue gases.The dimensions of the unit are based on basic conditions, defined for an existing oxy-fuelprocess at Chalmers, and on the results of computer modelling.

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.

The aim of this thesis was to investigate the possibility of integrating an item tracking systemwith a monitoring system currently under development at Fifth Generation Technologies (P) Ltd.A literature study of RFID technology and the networks ZigBee and MiWi was done. Based onthe literature study a concept for a distributed system was developed.The concept is to have several RFID readers placed in the area where tracking is to be performedand allow them to communicate with each other through wireless communication. The RFIDreaders shall be able to form zones and filter the data that is forwarded from the zones to theservers and thus perform some of the work that the server would normally have to do. Theconcept has been evaluated by prototype development and testing. The prototype uses an ultrahigh frequency RFID reader and a MiWi network.The test indicated some limitations with the selected technologies.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

This thesis has been carried out in cooperation with Burseryds Bruk AB.Burseryds Bruk is a company that manufactures steel strapping. The thesis isabout developing a concept of protection that should be used to protect theoperators from the rotating parts of the machinery lines. The aim of the projectwas to improve work safety for operators working at the machines by producing aconcept for a protective device. The project's first part was based on ergonomic data collection methods tounderstand the operations performed on the machine and the hazard occurringduring the process. The methods used to collect data were, interviews,observations and questionnaires with the operators of the company. This was thenused to make the ergonomic analyzes hierarchical task analysis and link analysis. The data collected from the company's operators was used create 10 conceptswhich were then evaluated.

The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

To provide our company a new business opportunity I have in this essay examined the economical possibilities to sell energy. I have chosen to do a case study on my own farm in this essay. The farm is focused to cropping and also have some properties for hire. The farm is situated in the village of Fjelie and that?s where the opportunity for selling heat are. Fjelie has about forty houses. The idea is to build a plant where straw is being used as fuel.

This master?s thesis will examine the concept of ?fixed establishment? in VAT-law. The concept can be found in the new EC-directive on the common system of value added tax, however it has existed for thirty years in previous directives. Despite this, the legislator has never provided a proper definition of the concept. Its meaning has therefore evolved through the case-law of the ECJ.The Court has put forward a number of criteria which are all to be met if a fixed establishment is to be at hand.

Previous research has shown that children with multiple disabilities have been able to learn to make choices. Practising choice making is a good way to introduce an intervention using Alternative and Augmentative Communication (AAC). Choice making with objects should then be trainded before choice making with pictures. The present study is a single subject experimental design and was accomplished at a center for children with disabilities in Tanzania during 12 weeks. The primary purpose was to examine if the number of choices made by two boys with cerebral palsy increased after communicationintervention with objects and pictures.

This thesis was performed at Indusec ABin Stockholm. Indusec AB is a companythat develops security solutions.Together with the Police of Sweden theyhave gotten the assignment to develop anapplication based on one of theiralready existing product Inferno soundbarrier. This application is supposed tobe mounted on a ballistic shield thatthe police use, the application consistsof a speaker box (the sound barrier) anda trigger with wire. The trigger withwire is the part that will be addressedin this thesis. The application willthen be used as a tool to surprise atarget at various skirmishes.The project consists of three majorphases, pre-study, concept generationand modeling.