This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

Uppsatsen behandlar sponsorrelationens händelseförlopp ifrån eventets perspektiv. Ifrån matchning, via avtalsförhandling till aktivering av sponsorskapet. Hur eventets image, identitet påverkas av sponsorernas varumärke diskuteras.Det empiriska materialet har samlats in via semistrukturerade telefonintervjuer med respondenterna..

The purpose of this Master?s thesis is to investigate how diversity takes shape in children?s picture books published in Sweden. Twelve picture books, which touch the aspect of diversity in the categories of gender, ages, culture, nation, ethnicities, language, class, sexuality and functional disorder, were chosen from the Swedish National Council for Cultural Affairs catalogue for youth and children?s books 2006. They have been analysed with the conception of ikonotext and with the theory of Pierre Macherey?s image in the mirror, of how literature reflects the reality of society.

Bringing back the nutrients from the city to the country is becoming increasingly important, as the world?s stores of nutrients get more exhausted. Sewage sludge is an unapplied resource, rich in plant nutrients, which could replace parts of the commercial fertilizers used in Sweden today. Sewage sludge may contain large amounts of pathogens, such as Campylobacter and Salmonella, why use can cause severe spreading of infections, both to animals and humans. These pathogens have the ability to survive for a long time in soil and water and therefore some sort of treatment of the sludge is recommended before use.

A bioslurry reactor was built for the bioremediation of TNT contaminated waste from the demilitarization industry. The field test was conducted at Vingåkersverken in Vingåker, Sweden, to see if results from laboratory studies could be repeated in a full scale reactor. The goal of the project was to optimize the reactor to such a degree that it could be used to handle the waste produced at Vingåkersverken and also that this technique could be applied for remediation of contaminated soils. Unfortunately the samples taken during the full scale field test were destroyed by the shipping company and no analysis was possible. A later attempt by the Biorex research group has also been unsuccessful to reduce the amount of TNT using the bioreactor.

An increasing amount of companies and organizations are starting to implement the use of cloud computing in their business. This trend results in that software, which was previously sold and distributed to the customers whom then had to install the software on their own computers, now is being replaced with Software as a Service (SaaS). SaaS makes software available through the customers? browsers, which results in that the service providers only have to administer a single application. The process to migrate a distributed application to a service delivered as a SaaS lacks sufficient investigation; this paper will provide some guidelines for conducting such a pro- cess.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

33 referendum has taken place in european states regarding the European Union since the fall of the Berlin wall. This thesis aims to initialy identify potential patterns in this group of referenda to launch and test a theory/hypothesis anchored in this pattern.The european states are differing in nature and the standard of living is chosen as the factor that can potentially have affected the outcome of the referenda held. The carrying thought here being that the voters in states with considerably lower standard of living than the european average would have a more positive attitude towards a deepened cooperation among european states.To try this connection between standard of living and how european citizens have placed their votes a main and principal quantitative test is undertaken. It is followed by discussion and arguments about the result of the test.The argumentation goes from being hopefull of the strenght of the hypothesis, to a more ciritical view of its' strength. The thesis is wrapped up in some argumentation about how and why it fails to explain what it was initially intended to do.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.