Sök:

Sökresultat:

1374 Uppsatser om Simulation training - Sida 36 av 92

Osäkerhet i energisimuleringar av flerbostadshus : Analys av fem nybyggnationer

Since energy simulations are used to verify that projected residential buildings will reach the current energy requirements it is important that the results are reliable.This report investigates the extent of uncertainty in energy simulations, estimates the causes of the uncertainty and its economic and environmental consequences.The method used in this report is based on three validation methods; empirical validation, analytical validation and comparative validation. The analysis was carried out for five multi-family dwellings in Uppsala with installed meters for energy measurements. One of these objects, Klockarlunden, was studied in more detail than the others.The results show that the deviations are between 10 and 29% for the studied objects, which means that the uncertainty is estimated to be at least 29%. All simulations underestimate the buildings need of energy. The simulation for Klockarlunden can predict the energy consumption to be within the range of 46-98 kWh/m2year with 90% confidence level based on the current uncertainty.

Intern marknadsföring i turistföretag

The purpose of this thesis was to study managers in the tourism market who works with internal marketing towards their personnel. A case study with two tourism providers, Hotel La-ponia and Mix Ranch, was performed. The cases were based on personal interviews with the hotel manager at Hotel Laponia and with the owner of Mix Ranch. The research questions were based on why tourist providers use internal marketing and how tourist providers use internal marketing. The findings were that it was regarded as very important to have moti-vated, satisfied, and properly trained personnel in this business because they are the ones who have direct communication with the clients and they are an important issue to help the com-pany to success.

Re-design av BEV-heater

Denna rapport beskriver det examensarbete som utförts på Calix AB under vårterminen 2013. Calix AB tillverkar värmare för bland annat batteri och kupé till fordonsindustrin. Uppdraget i detta examensarbete var att göra en omkonstruktion på BEV-heatern (Battery Electrical Vehicle) som är en batteri- och kupévärmare till el och hybridfordon. Problemet med den nuvarande konstruktionen är att den bygger på delar från äldre värmare till fordon med förbränningsmotorer, samt att konstruktionen inte är lämplig för produktion i större serier. Krav som Calix AB hade var:Integrerat ChassiMinimera tryckfallUnderlätta montering och tillverkningUppfylla standarder satta av fordonsindustrinKunna monteras ?in-line? i fordonetFör att kunna genomföra projektet var vi till en början tvungna att få kunskap om hur den befintliga BEV-heatern fungerar.

Optimering av slutfasstyrning

Modern missiles must meet higher and higher demands. They should be autonomous, have long range and still have a big effect on the target. To maximize effect on target some missiles not only minimize miss distance, but also try to hit with a certain angle; often perpendicular to the surface of the target. In this thesis a method to guide the missile in the terminal phase of its mission where both point of impact as angle of impact are specified. The method consist of two parts.

Ljud i landskapsarkitektur : från buller till kvalitet

Landscape architects has many ways of transforming our cities and landscapes. Traditionally, most attention has been put to visual qualities. Pen and paper are well established as the way to present proposals and to analyse in the landscape architects profession and training. But are we perhaps missing out on other ways of seeing the landscape? The purpose of this paper is to present sound as a tool of transformation. Sound in public spaces has long been treated just as noise and therefore unwanted.

Studie av värmeflöden i befintligt bostadsbestånd : Utvärdering av energieffektiva besparingsåtgärder

The purpose of this master thesis is to investigate different types of measures for making buildings more energy efficient and to estimate their profitability. The calculations were performed with the building simulation program VIP+ and the evaluation of the profitability with the life cycle cost method. Furthermore, it was examined how losses in the distribution of secondary systems of district heating can be avoided. Options to replace district heating with a local district heating system based on bio-energy have been investigated. The possibilities of achieving more efficient thermal energy consumption and production for the chosen estate were also examined.The object of the study has been a residential estate with 133 detached houses in Uppsala, built in 1974.

Kartläggning av material flödesflaskhals i ICA butik.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

Virtual Reality : En ny veklighet för arbetsterapin?

Arbetsterapi är ett ämne som framhäver hälsa och välmående genom aktivitet. Det huvudsakliga målet som arbetsterapeut är att möjliggöra för personer att delta i aktiviteter i det dagliga livet. Virtual Reality är en simulation där datorgrafik används för att skapa en tillsynes realistisk miljö och denna värld är inte statisk utan integrerar med användaren. Syftet med denna litteraturstudie är att kartlägga hur och varför Virtual Reality kan användas av arbetsterapeuter. En systematisk litteraturstudie genomfördes och efter databassökning uppkom 14 artiklar som via en manuell sökning kompletterades med ytterligare 5 artiklar.

Mitt i skärningspunkten finns pedagogen : Lärarrollen inom kriminalvårdens klientutbildning

The purpose of this study was to investigate the teacher?s situation in the correctionaltreatment?s client education. The paper examined teachers? experiences of their professionalroles as well as their perception of the students? situation. The study wasbased on telephone interviews that were recorded and analyzed afterwards as well asan analysis of texts that affect the teachers? work.

Rytmik för Skådespelare - Vad kan en rytmikpedagog tillföra i en högre teaterutbildning?

Skådespelaryrket kräver mycket av en människa både intellektuellt, färdighetsmässigt och fysiskt. Det förväntas också ofta av en skådespelare att vara musikalisk. Musikalitet kan yttra sig på olika sätt. I skådespelarsammanhang vill jag påstå att musikalitet kan finnas i allt från texthantering till hur man rör sin kropp. Jag är rytmikpedagog, men har också arbetat som skådespelare.

Likvärdig service börjar med ett gott bemötande: folkbibliotekens beredskap inför 2010.

In 2010 there will be a political resolution to ensure that the Swedish society is accessible to all citizens including people with disabilities. For this purpose a national action plan for disability policy "From patient to citizen" (Govt. Bill 1999/2000:79) has been set out with the aim of ensuring that the disability perspective will permeate every sector of society and that the approach and response to people with disabilities will be improved. The Swedish National Council for Cultural Affairs is responsible for implementing the disability policy in the cultural sector.Since public libraries in Sweden are a part of the public cultural sector, they will also be affected by the political resolution regarding accessibility. The concept underpinning library services for disabled people must be that of equality of access.

Modell för dimensionering av AGV-system inom tung industri

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

Design and evaluation of an AGV-system for Tetra Pack in Lund using simulation

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

Kvalitetssäkring:En analys av egenkontroll

A degree thesis about quality control and assurance in construction. Made in cooperation with Wästbygg. An analysis was made of the self-monitoring control that is conducted during the construction. The data was collected from interviews from personnel employed by Wäsbygg as either work-leader, project-manager or quality- and environmental-coordinator. During the study there was also a review of the literature in the subject.

Resursskola, berättigad skolform eller tvivelaktig placering? : -en studie ur elevperspektiv.

The purpose of this report is to investigate teachers views of whether pupils with Asperger Syndrome, autistic symptoms or ADHD shall go in ordinary classes or special groups. The study tells you about what difficulties these pupils often have, what adjustments they need in their schoolsituation and the positive and negative effects of joining a special group.A teacher for special needs, two teachers in special groups and two teachers in ordinary classes have been intervjued and earlier made researches have been studied.The conclusions of this study are that the decision of whether a pupil shall go in a normal class or a special group must be made individually. Most pupils who are capable to profit from the training in a normal class and pass their examination, shall go in a normal class. The greater part of the recommended adjustments are possible to do in a normal class. But it requires more resourses and teachers with better knowledges about theese handicaps..

<- Föregående sida 36 Nästa sida ->