The aim of the present literature study was to define and describe the area ?compliance in veterinary medicine? (i.e. the way treatment recommendations are being performed) and discuss the factors that influence the level of compliance. Based on the findings, a model that intended to increase compliance in orthopedic postoperative rehabilitation of dogs was designed. In the daily work as a veterinary nurse it is essential that one provides the best possible care to the animals from the beginning to the end of the treatment.

This master thesis has been performed at Solvina in Gothenburg for Skellefteå Kraftand Vattenfall Eldistribution. The aim of it is to investigate the consequences of theinstallation of a wind power plant on the mountain Uljabuouda in the vicinity ofArjeplog. Especially the impacts on voltage and transient stability are examined.Furthermore, the amount of extra strain on the voltage regulation equipment and theneeds for increased regulation capabilities are looked into.The wind power plant is planned to be built by Skellefteå Kraft and connected to a130 kV grid owned by Vattenfall Eldistribution. The work comprehends the followingmain parts:- Theoretical studies aimed at wind turbines and power system stability issues.- Modelling of the type of wind turbines assumed to be built on Uljabuouda.- Simulations of different operation cases and analysis of the simulation results.The results from the simulations show that, as far as voltage stability and extraworkload on tap-changers are concerned, the wind power plant does not, in anysignificant manner, worsen the present conditions. The problem of overloading theline between Arvidsjaur and Vargfors is also minor.

Water hardness indicates the concentration of calcium and magnesium ions in water. Water with high concentrations of these ions is described as hard water and water with low concentrations is described as soft water. Water that is too hard or too soft can lead to technical and economical problems. In collaboration with Midvatten AB, groundwater hardness in the Badelunda esker between Leksand and Avesta has been mapped, and an attempt has been made to explain the variations. For this purpose, different GIS programs, such as ArcView, ArcInfo, IDIRISI, and one geochemical modelling program, PHREEQC, has been used.

Marketing is a broad subject with many different areas. Part of the marketing that has been of great importance is the 4P:s also known as the marketing mix. Marketing mix is included in one of the traditional marketing approaches. In recent years there have been some changes and have begun looking at new ways of looking at marketing. One of the ways is entrepreneurial marketing to the effect that the company tries to use its resources optimally.

E-learning är idag ett område på framfart. Fler och fler organisationer väljer att utbildasina anställda med hjälp av elektronisk media. Genom E-learning sparar organisationerpengar och tid i utbildandet av sin personal. En vanlig missuppfattning är att man genomatt överföra ett utbildningsmaterial till elektronisk media har skapat ett användbart Elearningsverktygmen i verkligheten är det betydligt mer invecklat än så. Den härkvalitativa studien syftar till att ta fram riktlinjer för anpassning av utbildningsmaterialtill E-learning.

Romanies have long lived outside the fabric of society and have long been exposed to discrimination in Sweden as well as the rest of Europe. The purpose of this study is to elucidate the experiences of young Finnish romanies in their everyday lives as well as their perceptions of living as a minority group in Stockholm today. Previous scientific researchers have often concentrated their studies on the romanies as a group, so we, the authors have chosen to concentrate our research on the individual?s own experiences. We, the authors have chosen to use a qualitative approach, to give us the opportunity through using open ended interview techniques to comprehend and interpret the individuals own accounts.

Three-dimensional computer graphics enjoys a wide range of applications of which games and movies are only few examples. By incorporating three-dimensional computer graphics in to a simulator the simulator is able to provide the operator with visual feedback during a simulation. Simulators come in many different flavors where flight and radar simulators are two types in which three-dimensional rendering of large terrains constitutes a central component.Ericsson Microwave Systems (EMW) in Skövde is searching for an algorithm that (a) can handle terrain data that is larger than physical memory and (b) has an adjustable error metric that can be used to reduce terrain detail level if an increase in load on other critical parts of the system is observed. The aim of this paper is to identify and evaluate existing algorithms for terrain rendering in order to find those that meet EMW: s requirements. The objectives are to (i) perform a literature survey over existing algorithms, (ii) implement these algorithms and (iii) develop a test environment in which these algorithms can be evaluated form a performance perspective.The literature survey revealed that the algorithm developed by Lindstrom and Pascucci (2001) is the only algorithm of those examined that succeeded to fulfill the requirements without modifications or extra software.

Pharmaceuticals that are found in marine ecosystems are a threatening environmental concern, which is known to harm both animal and plant life. One of the reasons for this problem is that the waste water treatment techniques are not optimized to clear waste water from its pharmaceuticals contain. In this master thesis four Swedish treatment wetlands were studied, and their ability to reduce numerous pharmaceuticals in waste water. The four treatment wetlands that were studied were those in Oxelösund, Trosa, Nynäshamn and Eskilstuna. Two ecotoxicological tests and chemical analysis were used.

- ABSTRACT ?Title: Winners of the Web ( Webbens vinnare)Number of pages: 35 (including enclosures)Author: Lydia KellamTutor: Else NygrenCourse: Media and Communication Studies CPeriod: Fall Semester 2006University: Division of Media and Communication, Department of Information SciencePurpose: The aim of the research paper was to see Internet and the digital techniques impact on marketing communication and consuming behavior on the Web. By understanding the relationship between marketing communication and consumer behavior my intentions were to comprehend how consumer behavior on the web could be understand. The purpose of this paper is to understand how different marketing activities on the Internet are followed by consumption.Material/Method: By using focus group interviews I wanted to study how individuals act on the Internet. How different activities such as communication and participation on the web could lead to consumption on the Internet.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Modern societies are generally becoming increasingly capitalist in nature and economies of these societies are thus likely to become more focused on consumer consumption. Advertising plays a vital role in contemporary society where we, as consumers and citizens, are surrounded by it everywhere we look and everywhere we go. This puts pressure on advertisers to become more creative and to explore new ways of marketing their products and services in an already saturated environment. We believe that the added pressure and the already established role of marketing in society make advertisements an interesting and telling object for analysis. This is particularly the case with regards to the concept of selling and marketing products that have qualities that are known to be less than beneficial for our health.This paper analyzes four commercial advertisements marketing beer; a product that we argue has qualities that can be seen as potentially bad for the health of individuals and for societies.

There are two species of voles that cause damage in Swedish fruit production: the water vole (Arvicola terrestris) and the field vole (Microtus agrestis). Both species make the most damage during the winter season. The water vole makes subterranean burrows and cause serious damage by gnawing on the tree roots. The field vole seldom makes burrows and gnaws the bark at the base of the tree trunk. In recent years there have been several reports about increasing vole damage.

This bachelor thesis in business economics raises the topic about Corporate Responsibility (CR), this topic is currently being discussed in a variety of channels and today an increasing number of companies are involved in corporate responsibility. How do Skanska work with sustainability and why are they doing this? It is also important to see the results of the work with sustainability will lead to. We will go into more depth in one of Skanska's projects, project M25, to investigate the CR strategies they use and see how they actually work with sustainability. The purpose of this paper is to describe and analyze how and why Skanska is working to implement CR policies in their operations and more specifically from the M25 project in order to achieve sustainable business development.

Background: The majority of the occupational accidents and work-related diseases at Swedish workplaces occur due to poor ergonomics during lifts and transportation of objects. The most common consequence of poor ergonomic conditions is low back pain (LBP) and the risk of developing LBP increases as the mechanical loading on the intervertebral disks grows. This study has investigated the biomechanical loading in the low back during two different types of patient lifts. The first lift (lift A) is developed by Modern Arbetsteknik (MA) and the second lift (lift B) is a common lifting technique among care workers. Objectives: The aim of the study was to identify any advantages or disadvantages with MA?s lift, regarding shear and compression forces in the L5/S1 disc.