Risk assessment is made to determine risks with contaminated areas and to determine which treatment the area requires. In Sweden, risk assessment is divided into three levels: risk analysis, facilitated risk assessment and detailed risk assessment. In detailed risk assessment site-specific guideline values are developed to compare with values of contaminants that are measured in the area.Site-specific guideline values vary with geological and hydrogeological parameters. The purpose of this report is to examine which of these parameters that affect the guideline values. The examination was done using a calculating program for consideration from the Swedish Environmental Protection Agency from the year of 1997.

A uniform environmental rating system for green buildings is demanded in today's society, where the requirements of the energy consumption for real estate are increasing. There are several different systems around the world used to rate buildings, all with different assessment criteria and starting points, which make it difficult to compare environmental rated buildings with each other.The purpose of this paper is to acquire knowledge about the differences between the Swedish environmental rating system Miljöklassad Byggnad and the American LEED, to discover which system is most advantageous. We also examine whether environmental rating affect the value of a property.Miljöklassad Byggnad is relatively simple structured, which makes it possible for private individuals to rate their property. LEED is better structured on the other hand in the case of environmental classification of commercial properties, because there are manuals for among others hospitals, schools and retail. The rating system for Miljöklassad Byggnad is good since the system seeks to fix the number of errors and deficiencies as soon as possible.

The study of the French market for softwood has been done in collaboration with VIDA AB. The aim of the study was to investigate important product quality and service quality dimensions, the customers? perception of the offering and generally describe the French market and present actors. The market for softwood around the world changes over time and new markets can mean opportunities for the sawmilling industry. The French market is the second biggest European market for softwood, has had presence of actors with sourcing of raw material from the Nordic countries for decades and there is a growing interest for building with wood. Theory being used is about the different dimensions that make up the total quality of softwood, together with intangible dimensions making up the total offering that helps the sawmilling industry to create positive perceived value for the customers. Methodological approach in the study was a case study research design, aimed at providing knowledge about one specific subject in one context. The general description was mostly carried out by literature studies and data from various statistics sources.

The intensity of cleaning declined dramatically in the early 1990?s in the Swedish forests. Recession, an economic depressed forestry and the new law of silviculture from 1993, where the duty of cleaning was removed have been considered as sources to the decline. This has led to a situation where huge areas of forests are untouched, which can lead to negative effects for those stands in the future. The purpose of this thesis was to find out how the individual landowner acts and feel when it concerns cleaning activities. Has the landowner noticed Södra?s campaigns about cleaning and what sort of measure should Södra implement to increase the members? cleaning activity? The thesis is based on a opinion poll made through a random draw among all Södra?s members.

This thesis is an evaluation of a new design concept for statorfeets in Gallejaur hydro power plant. Founder of the work is Vattenfall AB Vattenkraft. During the 70- and 80´s nuclear power began to be phased in to the Swedish grid, which meant that hydropower became an important source of rules. The generators began running in so called intermittent operations instead of basic operations, which meant 300-600 start/stop per year instead of one-ten numbers start/stop per year. In order to deal with the thermal forces that arise at every start and stop suppliers began to mount so called sliding joints, which is to take advantage of these forces and maintain the stator shape.

Bakgrund: En av sjuksko?terskans grundla?ggande uppgifter a?r att lindra patientens lidande i samband med va?rd. Lugn musik har visat sig vara ett effektivt verktyg fo?r att minska patienters upplevelser av stress och sma?rta vid flera procedurer inom sjukva?rden. Parametrar som hja?rtfrekvens och blodtryck kan pa?verkas av musiken.

Studiens syfte var att undersöka hur olika kartläggningsmaterial kan utgöra underlag för att tidigt uppmärksamma elever i lässvårigheter så att alla får lyckas i sin läsinlärning. Till största delen har en kvantitativ metod i form av statistisk dataanalys använts, men undersökningen har även kvalitativa inslag. Ambitionen har varit att ta del av en kommuns screeningresultat i läsning för alla elever i skolår 3, en population på 247 elever. På sju av åtta lästester samlades över 80 % av populationens resultat in.Undersökningen visade att testetFonolek kan vara till nytta för att predicera hur elever lyckas på kommande lästester i skolan. Särskilt väl kan Fonolek predicera resultat på ordavkodningstester.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

The goal of this thesis is to investigate the W3C Geolocation API from a developer?s perspective, focused on whether it makes development of location-based applications more accessible to developers. This has been investigated by looking at available ways to locate, possible uses, the functionality offered, the necessary level of prior knowledge needed for a developer and requirements on developer tools. This has been achieved through studies in relevant areas, a thorough introduction to W3C Geolocation API functionality, and by using the API to develop two different location-based applications as a demonstration. Testing of applications, on different platforms and in different environments, in conjunction with investigation of the rest of the material has shown that W3C Geolocation API in many ways actually makes development of location-based applications more accessible for developers. The API also provides fully adequate functionality and quality to meet the requirements for development of both simple and very advanced location-based applications. Målet med denna uppsats är att undersöka W3C Geolocation API ur ett utvecklarperspektiv, fokuserat på om den gör utveckling av positionsbaserade applikationer mer tillgänglig för utvecklare.

This report represents a comparison between two different tools used to create an online store that was developed by two students at the Technical University in Jönköping. The web shop will be of great benefit to both customers and administrator in a food firm known as Mattias' Livs. The company wanted an online store that facilitates the sale section and gives a full control of their stocks. The aim of this thesis is to create an online store that offers customers the ability to shop online and help the staff to operate the company in a simpler and more efficient way, which reduces the need for human resources and thus leads to less costs for the company. The aim also includes a comparison between the two different tools used to create the online store.

A today common soil reinforcement method is the installation of lime-cement columns. Lime-cement columns have been used since the 1970?s and have been a useful method for stabilizing soil at great depths. It is mostly used for stabilizing road and railway embankments because the method is economically viable and the columns are easy to install. The total costs for the installation of the lime-cement columns is dependent on the numbers of installed columns, what percentage of lime and cement that has been used and the pattern in which the columns has been installed.

Keränen, Sara & Jernberg, Marie (2005). Ämnet Idrott och hälsas betydelse för hälsofrämjande liv. Idrott för idrottare eller är alla lika viktiga? En kvalitativ och kvantitativ studie av lärares och elevers uppfattningar om idrott och hälsa samt sambanden dem emellan. (The School Subject Physical Education and Health´s Significance to Promote Health.

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.

The large-scale soy cultivation has negative consequences for the habitat of local populations because of the intensive use of pesticides and the destruction of rain forests and eco-systems. GM soya, varieties are often used. The majority of Swedish people, however, do not want GM products in their food. It will be hard in future to ensure GM free food, particularly foods that come from countries where GM crops are grown on a large scale. It is very difficult to avoid cross- contamination when both GM and non-GM crops are grown in the same area.

For the company to work well, it is necessary with a good economy, a high qualitative production and a well working system concerning the environment: the whole cycle on the farm needs to be working. At the same time, debaters about the environmental impacts are also requiring higher demands for the dairy farmers and therefore also the management programs. Management programs for feed evaluation calculations have been more developed over the years. Big amounts have been invested in the new feeding system with NorFor, but no one seems to have asked the dairy farmers what they themselves want to spend their money on, and what they need help with. For the dairy farmers it is necessary that the whole company is controlled in the right way, and much more than just feed evaluation is included in this.