In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

Since 2003 Saudi Arabia is under attack from domestic Al Qaida-cells which, by random shootings of westerners and bombings of compounds and official state buildings, is trying to challenge the stability of the royal regime. According to Al Qaida, the Royal family is attacked because of their friendly relations to the US and for not implementing Islam in the Saudi society as profound as they ought to. Political analyst finds it obvious that the Islamic Al Qaida-cells by terrorism is trying to erode the stability in the kingdom.An important foundation for stability for any government is legitimacy. The aim of this thesis is to examine the royal legitimacy strategy in the state bureaucracy of Saudi Arabia. The question at issue is: how has the royal family constructed the civil, military and religious bureaucracies to maintain and promote stability and legitimacy?The thesis focuses on the on three different units within these three bureaucracies and it surveys the way they are staffed and organized to strengthen and maintain legitimacy for the royal family.

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

 This report deals with thecollaborative project between FagrellProdukt Utveckling AB and studentsfrom the Faculty of Science andTechnology at Uppsala University. Theoverall objective of the project wasin addition to developing students'abilities, to help Fagrell withverification and development ofFagrells prototype, Fundamental flowreactor, for flow chemistry. Theuniqueness of Fagrells flow reactor isthat it should be simple andaffordable compared to competing flowreactors in the market.The verification was done bylaboratory and simulation sessions.The verification shows that Fagrellsidea on how to construct a flowreactor is very good.The development included bothtechnology and business. The result ofdevelopments can be helpful for thecommercialization of Fagrell flowreactor..

The purpose of this thesis is to describe what Building Information Modeling, BIM, could mean for landscape architects, and also hopefully to make sense of the possibilities and problems of the system. BIM is about virtual design and is based on all consultancy groups in the design team modeling in 3D. Intelligent objects and metadata, such as price and material, are used. The project group has a common interchange format for simple sharing of information. To get an idea of how the situation with BIM for landscape architects looks like today, I collected information mostly through interviews.

The purpose of this Bachelor?s thesis is to describe and analyze the implementation of Facebook in a public library. A case study consisting of qualitative interviews and studies of documents containing goals for the library has been conducted at a public library going through the process of implementing Facebook in their operations. The theoretical framework for this study consists of Everett M. Rogers?s stages of the innovation-decision process and his characteristics of innovations as perceived by individuals.

This thesis has been performed at Uddeholms AB with the purpose to investigate theparameters affecting the formation of inclusions during the manufacturing of a low carbonmanganese-steel.A follow-up, steel and slag sampling and evaluations in microscope have been done for a totalof five heats.The results for each heat have been evaluated in relation to the theory from the literaturesurvey and suggestions for changes in the process to reduce the amount of inclusions whichhave a negative effect on the steel quality have been given.The project extends over a large process where many parameters affect the formation ofinclusions. However, a tendency that a higher addition of alloys seems to increase the totalamount of inclusions before and after the vacuum degassing is seen.The majority of the studied inclusions seem to approach the composition of the top slag aftervacuum degassing. Ladle glaze may cause the inclusions which had a different compositioncompared to that of the slag.A high or low ladleage together with a high argon flow during vacuum degassing seems todissolve particles from the refractory which later on get trapped inside the inclusions.The floatation for two heats has been studied where a short floatation seems to give a higheramount of inclusions in casted material.In machined material so called stringers were found. The main composition of those stringerswas pure alumina. Inclusions with a composition of pure alumina were not found in the liquidsteel, thus the pure alumina inclusions must be formed during the casting.

Environmental issues and sustainable development is a high priority in today?s society and has received substantial attention lately. In the inaugural speech it is expressed that the goal for the IT?politics is a sustainable information society for everyone, which can be achieved by using IT to support sustainable growth. The Ministry of Enterprise, Energy and Communications has developed a document which outlines three specific proposals on what the government should focus on during a three?year period (2008?2010) that with the use of IT will contribute to a sustainable society.

The purpose of this study is to characterize the research in the field of Knowledge Organization, during the period of 1990-2002, focusing on the subject and the epistemology of these studies. The result shows that studies concerning representation, e.g. subjects such as classification, indexing and bibliographic description, are the most frequently researched areas throughout the period. Classification was more popular in the beginning of the period, but later bibliographic description, mostly with studies on metadata, became more visible, together with a growing interest in information retrieval. The theoretical discussions in the studies focused primarily on document analysis and the organization of digital documents.

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..

This paper deals with prehistoric charred organic material, interpreted as bread, found in graves and in the underlying settlement at Kalvshälla, Järfälla parish in Uppland. The aim was to categorize the organic material morphologically and with the help of Fourier transformed Infrared spectroscopy (FT-IR) to see whether it was bread or not. Material from 13 graves (dated to Late Roman Iron Age until Viking Age) and 3 finds from the settlement have been analysed. Differences were noted both in shape, porosity and structure. Some of the material has been interpreted as cereal based foodstuff instead of bread due to morphological discrepancies.

The world today is experiencing an AI summer, urging us to engage with its technologies on a daily basis. Recently, researchers have begun to voice concerns about the potential risks if we do not address the inherent biases in these systems. After all, AI is merely code based on mathematics produced by humans. This essay focuses on Stable Diffusion and Midjourney to examine biases in fashion representation and how fashion is visualized and reproduced concerning race, social class, and culture. A series of prompts were intentionally written in simple terms such as ?rich,? ?poor,? and ?race.? The results revealed troubling biases, as these programs consistently depicted poor individuals as people of color and portrayed wealthy, elegantly dressed individuals as exclusively white..

Benthic invertebrates play important roles as feeding resources for many organisms in different food webs. Shifts in predation of these organisms can generate cascading effects and potentially lead to the disappearance of one or more species from a site. Cascading effects can bring impacts to organisms who aren?t even directly involved, why studies in this field are important for understanding sudden changes in ecosystems. I examined the predation from fish and waterfowl on benthic invertebrates in the shallow and eutrophic Lake Tåkern in the plains of Östergötland County, southern Sweden.

Our aim in this work has been to redesign ModernFamilies and make a user-friendly interface for people with aphasia. The focus has been to identify general issues they might face while using different technology and applications, in order to find better alternative design for ModernFamilies, with a focus on usability. To approach this issue, we used a qualitative method. Our study includes several interviews and observations preformed in conjunction with the AGNES project (AGeing in a NEtworked Society) and speech therapists. Aphasia requires simple design that in the same time gives them support to understand and use technology and different applications.