Nowadays, cooperation is necessary and this study tries to illuminate the possibilities and problems about cooperation in fiction between 7 small/midsize farms in Skåne. Conventional Farming is done with grain and sugarbeets as specialization. Calculation of machine costs have been done and compared in the study, both for the farms in thorough and the fictitious operation companies. Business ratios as depreciation/ha, interest/ha and maintenance/ha have been calculated. In this essay we present a proposal about how a practical implementation can be done. In the proposal there is an example how the distribution of work can be done.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

Course: Degree project in logistics, 4FE05E, spring 2013Author: Maria WennbergSupervisor: Petra AnderssonExaminer: Helena ForslundTitle: Standardization and improvement of the outbound process execution Background: Transportation represents a critical part of companies? logistics. Special management and control is needed when using a third party logistics. Balco uses a third party logistics for their deliveries of balcony parts and before it takes place the outbound process is executed. Currently, Balco experience difficulties with the process? many ways to be performed by the project managers and logistics department.

Svartedalens nature reserve a social richness worth develop. The nature reserve of Svartedalen is an area of high biological and social values. The reserve is located close to several densely populated areas. The reserve has been classified as a national area of interest for nature conservation and outdoor life, and as a Natura 2000 area according to both the bird- and habitat directions. The reserve is the largest landarea in Västra Götaland, 3 410 hectares, where a resolution has been made about all these forms of protection. The foundation Skogssällskapet owns 1 956 hectares of the reserve, at 1 384 hectares of the property they pursue FSC-certified silver culture, according to current management plan.

Diesel electric propulsion is in many ways a good alternative to conventional shaft propulsion, both economically and environmentally. There are also many other good side effects which need to be considered, i.e. better manoeuvrability, more efficient use of space and less noise on board. However, there are applications where diesel electric propulsion is not profitable. Large ocean going ships? profitability is much depending on fuel costs and the diesel electric alternative cannot compete on long journeys with large low speed engines.This thesis will treat the aspects of choosing between a diesel electric system and a classic mechanical propulsion system.

This thesis studies the way valuation of investment properties is conducted in accordance with IAS 40 and how reliable these valuations are. This has been conducted by studying ten Swedish real estate companies listed on the NASDAQ OMX, during the period 2005-2008. The study shows that all companies use valuation models to determine the fair value of investment properties. Two different types of models have been identified. Companies that use the cash flow model show inconsistencies in time horizon, and how they determine the horizon value.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

As the companies of today are good at protecting themselves against external threats, but are having problems with internal threats, we focused on how information can be protected from ending up in the wrong hands. First and foremost to protect information from employees who might steal it and sell it to another company. Since the security investments needed are connected to the financial costs of implementing them we have tried to create a balance between the investments needed and the cost of implementing them. The different kinds of protection needed are first and foremost protection to make data less accessable, passwords and traceability. While it is hard for us to estimate the amount of money a company lose by the hour when the production stands still, we have not been able to use any of the excising models to calculate the profit of installing countermeasures.

This report will present athesis on behalf of Eleiko Sports AB and carried out by two students at the InnovationEngineering (University of Halmstad). In this report the project participants willdescribe the project background along with the current product issues andneeds. A clear structure for participants, stakeholders and information flowbetween these parts will be included in this report so that you can clearly seethe areas of responsibility. The report includes a timetable which the grouphas worked along and also methods used. In the development process you will beable to read about how the students in an interdisciplinary way have used themethods and come up with an entirely new product.

The purpose of this study is to incrementally, through a combination of various methods, examine the assumptions about the working economic outcomes that can be made based on planned ergonomic intervention in a department at Pfizer Health AB in Strängnäs. The study contributes to knowledge about how assumptions on OSH financial results can be made, based on planned ergonomic interventions. These assumptions were based on biomechanical calculations made on the basis of ergonomics measurements with inclinometer. The study is important because previous research has shown that poor work environment have a bad impact on the economy of a company in different ways. It can for example be negative impact on the company's productivity and quality of the units produced or the services provided.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

There is limited research done in the area of management control in the relationship between companies. This study investigates management control in outsourcing relationships and the decision to change sourcing strategy and to insource functions. The empirical research was conducted at an international company, which in this study has been anonymized. The research is mainly based on interviews. To extend and verify the conclusions drawn, another company, AB Ph.

Companies use different forms of representation to promote business negotiations. The regulations for the right to deduction for the cost of representation are stated in Chapter 16 section 2 of the Swedish Income Tax Act (IL). According to the law there must be an im-mediate connection between the expenditure and the business practice and the claimed de-duction must be reasonable. The Swedish tax authority publishes general recommendations regarding representation which are used as guidelines for the tax payer to follow. The gen-eral provision about tax deduction can be found in Chapter 16 section 1 of the Swedish In-come Tax Act (IL), stating that expenses to acquire or retain income shall be deductible.

The purpose of this essay was to try to find out if the optimal farrowing pen exists. By interviewing producers, veterinarians and salesmen and also through a literature study, I have tried to evaluate advantages and disadvantages regarding different types of pen formations and environmental details. The interviews with the producers showed that they all were satisfied with their particular farrowing pen. It also showed that one material can be functional in one farrowing pen but not in another. The determining factor for the outcome of the farrowing pen was the individual experience and the way of thinking of the producers. The veterinarians were of the opinion that there today were no existing farrowing pens that responded to the pigs needs. However, the results on the farms were generally good. The salesmen thought that the production costs could be lower if a sort of a standard pen was used.