The Swedish State Road Administration has since 1992 procured operations and maintenance of state roads on the open market. The procurement has been termed ?Grundpaket Drift?, GPD, and comprises mostly operational measures for road networks.The clients of GPD, SRA regions, have gradually changed the original documentation in order to adapt it to local conditions. This process has gradually led to that some parts of the documentation are creating problems for contractors interested in procuring jobs.This thesis tries to analyze GPD and clarify the differences that may be essential to the procurement process and to facilitate future joint working projects and processing descriptions..

The purpose of this Master Thesis has been to investigate the possibilities for a new type of noise reduction solution that could decrease the negative effects resulting from larger traffic roads. The idea has been to construct a noise barrier with a roof ? like a tunnel placed on a road. The choice of material has been focused on transparent materials in order to lower visual intrusion and barrier effects. This project idea is called the Noise tunnel.After having investigated the current offer of noise solutions, it has been concluded that these solutions rarely provide a sufficient level of noise reduction ? at least not when government regulations of acceptable noise levels are applied.

AbstractThe Swedish Road Administration in the region of Mälardalen has since 2004 worked to in¬crease the efficiency of the maintance of bridges based on limited functional requirements and time demanded action.The maintenance of the bridges is contracted in the county of Uppsala since 2004, and Örebro since 2007. The county of Nyköping and Västerås is contracted by the traditional system. The contractor will perform a regular maintenance on all bridges. The bridges are inspected by the contractor at least once every year.The contractor registers the result of the inspection in a database called BaTMan. BaTMan is a Bridge and Tunnel Management system and is a strictly web solution were the user logs in via the internet.The Swedish Road Administration also inspects the bridges to se that the demands on the bridges are followed.My work is to compare these different inspections and to see any development..

In 1997, the Swedish parliament adopted a decision on Vision Zero (nollvision) in the road and transport system. Vision Zero means that no one should be killed or seriously injured in traffic accidents in the road transport system (Prop. 2003/04: 160). For the Transport Administration in Sweden (Trafikverket), this means increased demands on security and signage at road work sites around the country. This in turn means increased demands on the contractors that carry out road work for the Transport Administration.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

The purpose of this study was to develop recommendations for using more efficient lighting and better graphic design to create a more uniform structure in the exhibition hall ?Road to the past? in Jönköping County Museum by answering the following questions at issue:1) How are the objects in the exhibition hall ?Road to the past? exposed today?2) How can you use lighting and graphic design to create structure in the exhibition and strengthen the expression in the exhibition?Our work is based on observations and open group interviews. We observed the exhibition hall ?Road to the past? during day and evening. In the same hall, we observed a guided tour that we followed up with open group interviews.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

The study was carried out as a time study of five wood chippers placed on trucks,so?called huggbilar. They are trucks with built?in wood chipper, chip bowl and crane pulling a chip trailer. The system is used for chipping wood fuel, transporting, and delivering the chips to heating plants.

se PDF.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

Wind damages next to strip roads in 1st and 2nd thinning in Boxholm, Östergötland Anneli Fransson, SLU, inst f sydsvensk skogsvetenskap, Examensarbete no 108 Wind damage is something we are all familiar with since the storms Gudrun (2005) and Per (2007). Research about strip roads and wind damage is very limited. It is commonly known that the trees next to the strip roads more often fall whit heavy winds, and the purpose of this thesis was to verify this statement. Data was collected from first- and second thinnings at Boxholms Skogar AB, Östergötland. In first thinnings data was collected from both spruce and pine stands and second thinnings only data from spruce stands was collected.

The aim with this thesis is to investigate the risk management at the department Road construction, The National Road Administration Region Mälardalen. The aim is also to study how the risk management could be improved to better support the project leaders. Included in theses aims is to examine potential problems with the current risk management and to suggest changes. It is of utter importance to define the concept of risk, to study how risk can be measured and in which ways risk can be analyzed. In doing so, a literary study has be done and fourteen respondents has been interviewed.Risk is to be seen more as a concept than a quantity.

Holmen Skog is one of the largest forestry companies in Scandinavia and they depend heavily on a large network of forest roads for production and logistics in connection to their forestry operations. The company recently introduced a new system for planning of road management. The system will also be developed with the intention to facilitate the monitoring of actions performed by road contractors. This report will provide information to support future decisions regarding further development of the system, after its introduction. In addition to a presentation of results from interviews, the report also provides a smaller study of the different subjects associated with roads, process work and process development. The study is largely based on interviews with road contractors that perform work for Holmen Skog today.

Available as pdf.