The purpose of this thesis is to explore how the internal information processing and management is carried out within a unit of Viskafors municipality. Furthermore, to explore and make recommendations of how the organisation can improve its internal information management. To get a full picture I have interviewed people at different levels of the organisation. The main findings showed that there was a dysfunction in the internal information processing and management. For example the study showed that the internal information did not reach out to the different parts of the organisation due to insufficient information processing.

The Swedish Migration Board has during a long time had problems with long processing times for persons that apply for asylum. The government has set targets that investigation should not exceed 6 months although it is done in almost 70% of cases.The study's aim has been to examine if steering can be linked together to long processing times and, if so, explain why. The intention has not been to provide a comprehensive picture of the problem but has defined itself to ensure steering impact. The study has been carried out by studying relevant governing documents, previous research and by interviews with administrators and decision-makers in two of the Migration Board asylum units.The analyses of the study show that a combination of inadequate steering and inadequate resources have contributed to aggravate the implementation, which has lead to long processing times..

The purpose of this project was to produce signal relay stations that could receive information via 2.4 GHz radio and relay the information to a designated target station. If a relay station was located outside of signal range for the target station it was supposed to utilize other relay stations to transfer the information to the target station, so called multi-hop.The would-be application of the relay stations was orienteering. When an orienteer punches a checkpoint the signal stations would relay information of who punched the control, when it was punched and the checkpoint that was punched to the speaker tower in the goal area.The work resulted in prototypes which fulfilled the statement of purpose and was tested at an orienteering competition with satisfactory results. The performance of the prototypes was tested and found adequate for the would-be application..

This thesis studies the negative impact that control signal saturation may have on a controlled system. Different methods that are used to compensate for this problem are also studied and evaluated. Both sensitivity to disturbances and the effect the method has on the systems'ability to follow a reference signal will be examined. Stability will be discussed, but no conclusions whether the systems are stabilized or not can be drawn. Control signal saturation will lead to a slower behavior in general.

This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

This report tested the possibility of using induction as a mean for transferring data and power so that it can be implemented as a communication medium between a terminal and measuring head mounted in a measuring frame. This would eliminate the need for the cable bunches that are used today. For testing, signal generators were used to generateFSK-signals and were transferred with the help of inductors to the oscilloscope for signal detection, this to see how the coils used in the tests behaved. Simulations of a PLL were performed to see how good it could handle FSK-demodulation. With the help of a PLL IC and the simulations a working FSK-demodulator could be assembled.

Digitizing objects and environments from real world has become an important part of creating realistic computer graphics. Through the use of structured lighting and laser time-of-flight measurements the capturing of geometric models is now a common process. The result are visualizations where viewers gain new possibilities for both visual and intellectual experiences. This thesis presents the reconstruction of the Parthenon temple and its environment in Athens, Greece by using a 3D laser-scanning technique. In order to reconstruct a realistic model using 3D scanning techniques there are various phases in which the acquired datasets have to be processed.

SAAB Aerotech division FGR in Arboga builds and develops equipment and components used in both military and civilian applications. To build a test system for a specific project that SAAB is responsible for requires a simple signal generator that can provide a pulse modulated signal. The need to buy a new advanced signal generator for example from Agilent is not as profitable as the instrument is expensive and contains features that SAAB does not require in their applications and test systems. That was the reason why SAAB offers two students a thesis where the goal is to construct a signal generator in accordance with what SAAB requests.This thesis contains several different phases. The first step was a meeting with our supervisor Mats Bergman and by reading the data sheets for components to be used in the project, with these information and specifications that we have received from SAAB we started to construct the signal generator.What we did during the construction work was to simulate and draw a schematic to be able to design the circuit board.

En mätserie utfördes på en entreprenadmaskin där entreprenadmaskinen var en tandemvält. Data som spelades in på en DAT-bandspelare var motorns rotationsfrekvens, valsarnas vibrationer samt ljudfältet i kabinen. Den insamlade datamängden analyserades m.a.p dess spektra samt ljudnivåer. Vidare predikterades resultat till implementering av det adaptiva systemet ur dessa insamlade data. Viss laboration utfördes på en modell av det adaptiva systemet m.h.a insamlade data.

This work is an experimental study where knock sensor placements are investigated using engine tests. The aim is to studythe quality of the signal from knock sensors and how the signal for engine control is affected at different sensor locations on Scanias, engine DC13. To find out at witch position on the engine youcan get a usable signal for engine control, the engine is running while the knock sensors with advanced measurement equipment is connected to the engine. Evaluation of signals from the knock sensors are made in the computer program Matlab. The program is producing a seriesof plots, from these plots it is visually possible to draw conclusions and find connections.

Examensarbetet som är utfört för SAS Flight Academy innebär att modernisera hanteringen av flygradiostationer för en flygsimulator från 1968. Detta görs med hjälp en PC som kopplas till det nuvarande datorsystemet med ett parallellkort. I PC:n finns en Microsoft Access databas där all data lagras om världens alla flygradiostationer. Informationen om flygradiostationerna finns lagrade på en CD-ROM som uppdateras ett antal gånger per år. Klienten till databasen är programmerad i Visual C++ och använder Microsofts programbibliotek MFC för hantering av databasen. Klienten har två uppgifter dels sköta hanteringen och dels uppdateringar av databasen.

Natural monuments are natural objects with special protection due to their high natural value or cultural significance. The natural value is determined by the occurrence of signal species found on and near the natural monument. The law surrounding natural monuments has evolved a lot since the first ones were declared, and today the title natural monument can be replaced with the title tree with high conservation value. The title has come later and can sometimes overlap natural monument. Some natural monuments lack the qualities required to be classified as a natural monument or a tree with high conservation value, but have a cultural importance.

This bachelor thesis is about an ultrasonic sensor, implemented in a bubble chamber in Artis. The sensor consists of the piezoelectric sensor and an electronic control circuit. The control circuit consists of a programmable microprocessor, PIC18F2420 and a circuit, which sends the excitation signal to the piezoelectric sensor, and later receives the echo. This bachelor thesis consists also of a theoretical study, which examines different techniques of liquid level sensing in a chamber. The study discusses which factors are important in liquid level sensing and examine accepted methods.

Under början av 1990-talet inledde Volvo Personvagnar i Olofström en process där övervakning av robotiserad MIG/MAG-svetsning var i fokus. Det ledde fram till ett forskningsprojekt som resulterade i att Stefan Adolfsson, Lunds tekniska högskola/Blekinge tekniska högskola, 1998 presenterade avhandlingen Automatic Quality Monitoring in GMA Welding using Signal processing Methods [5]. I den presenterades ett SPRT-baserat övervakningskoncept för övervakning av MIG/MAG-svetsning med kort- och spraybåge. För att få fram ett kostnadseffektivt övervakningssystem uppkom tanken att använda vanliga PC-datorer som plattform. De erbjuder hög beräkningskapacitet till förhållandevis låg kostnad. Examensarbetets mål är att implementera det SPRT-baserade övervakningskonceptet i LabVIEW på en PC och utvärdera realtidsegenskaperna.

In many clinical applications, it is desirable to transmit sensor information wireless. In earlier research, investigation transmit ECG signal using Bluetooth, was performed. However, when Bluetooth has some drawbacks it is of interest to investigate alternative methods, one such method is ZigBee. Bluetooth has higher data rate speed (1Mbps) than ZigBee (250kbps). However, Bluetooth consumes more power.