At present Getinge can offer a new generation of trolleys that they produced in 2011. The trolley used to Getinge various autoclaves and has the primary task to help the user/sterilization personnel to transport shelves or baskets, with or without cargo, from a packing table to the autoclave. The purpose of this thesis has been to develop a primary solution how the docking process between Getinge trolleys and autoclaves can be improved. The work has in most part followed Fredy Olsson principle and primary construction method. The work has included product research, study visit and development of a requirements specification, to satisfy Getinge, their clients and circumvention products requirements.

Control and comparison of various cleaning methods on restaurants in Södra RoslagenThe purpose of this report is to find out and analyze the efficiency of cleaning methods in restaurant kitchens. The investigation was carried out through unannounced inspections at 89 restaurants in Södra Roslagen (municipality of Danderyd, Täby and Vaxholm). ATP-measuring was done on a plate, a knife, a bench surface and a cutting board. The ATP-method measured the amount of food residue on equipment and working surfaces after cleaning, with a luminometer and swabs. Restaurant staffs were asked to describe in detail how and when the last cleaning was carried out on the surface.

The European Council agreed in 2008 on a climate and energy package to combat global warming. This package is valid for each EU member country and means that greenhouse gas emissions must fall by at least 20% and the EU's energy use to 20%, consisting of Renewable Energy in 2020. The Swedish Government has set stringent climate and energy with the intention to set an example for the rest of Europe. For example, renewable energy sources account for at least 50% of energy use and our climate emissions to fall by 40% by 2020. A combination of these goals and a steadily rising oil price has led to an increased demand for wood fuel in the form of such branches and tops.

There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of moisture content.

Society has depended on fossil-based fuel for a long time, which has led to a fundamental increase of greenhouse gases in the Earth?s atmosphere. To tackle this problem the international community has agreed that action is necessary. Focus is now directed towards local extraction of energy from renewable sources such as biogas.Utö is participating in the Green Island project, which aims to investigate the possibility of making the island climate neutral. This report has been implemented on behalf of Skärgårdsstiftelsen, the main partner responsible for the Green Island project in Sweden.

System based models of plants rely on descriptions and assigned functions of genes, and currently 50% of the genes in Arabidopsis thaliana has either no assigned function or a function based on homology only. Mitogen activated protein kinases (MAPK's) are key players in cell signalling and are conserved among eukaryotes, though their targets are highly diverse. A recent study has described a small Arabidopsis protein (80), without homology to any described protein, as a phosphorylation target of the MAPK's MPK3/6. Further work established ?-glucan phosphorylase (PHS) as interacting with 80 and described a delayed senescence phenotype for 80 knock-out plants.

At the end of 70s and the beginning of 80s, 18 terminals was built and used for chipping wood residue from clear cuttings. Most of the terminals was terminated before the 2000s but with the high oil- and energy prices that we can see today there might be a place for these terminals again. The goal with the study was to analyze and compare economical differences between 5 different logistical systems, collected data was used with a set of formulas. The systems include long range transport of slash, chips and bundles. Three of the systems include transport by lorry to industry the last two includes a terminal with access to train transport.

In this study potential health risks for employees in connection with handling of bottom ash and bottom ash water at a Municipal Waste Incineration (MWI) plant have been investigated. Air surrounding the bottom ash and the bottom ash water has been examined. MWI is one of the primary ways to manage solid household waste, and bottom ash is the main solid residue produced by the incineration process. Bottom ash constitutes about 15-20% of the original waste. The bottom ash is extinguished in a water bath (bottom ash water).The study was carried out in a MWI plant in Karlstad, Sweden.

In this thesis the methane gas potential of three different substrates, two algaes Saccharina latissima and Laminaria digitata and biosludge mixed with paper fiber was studied. This was done by batch experiments in a laboratory environment to examine the gas production and composition of the produced gas.Biogas production is a complex anaerobic digestion process in which various microorganisms decompose the substrate in steps and at the end produce biogas and a residue. Many factors affect the production of gas, for example the substrate content, temperature and pH in the digester.The analysis of methane potential were divided into two experiments. In experiment 1 substrates were digested along with inoculum from Växjö waste water treatment plant in a temperature of about 37 ?C.

Hemp has been used for textiles for a long time in history until it became illegal to grow in many countries in the 1930s. It is interesting from an environmental point of view because it doesn?t need any pesticides and in most locations it doesn?t need any irrigation either, compared to cotton, which normally requires big amounts of both pesticides and water for irrigation. Hemp is a bast fiber, which means that the fibers are located on the bast of the stem (on the outer layer of the stem). Therefore they cannot be spun directly, they have to be removed from the stem first.

The objective of this essay is, from the golf perspective including the golf courses' physical attributes, golf club management, members of the golf club and golf course designers, to explore possibilities for making existing golf courses more multifunctional. The purpose of this is to increase the understanding for golf courses' role as part of the landscape and comprehension regarding possible opportunities around them to exploit and develop.The increased pressure of population in peri-urban areas has resulted in a greater need for accessible recreation, particularly in the isolated farmland. As a result, land is sometimes used against landowners' will, which is a deficiency that is the basis for many conflicts between farmers and landowners.In the current situation, there is a negative trend in golf with reduced interest and fewer golfers than in the past. As a result, many of Sweden's golf courses have financial problems and are therefore trying to find new ways to avoid bankruptcy. Sweden's existing golf courses occupy about 30 000 hectares of land, of which a very large percentage are located in peri-urban areas.

Sveriges miljömål ?Begränsad klimatpåverkan? beskriver ambitionen att fram till år 2020 ska ha minskat utsläppen av växthusgaser med 40 % gentemot år 1990. Ett sätt för Sverige att lyckas med de uppsatta målen är att utveckla biogasproduktionen. Potentialen för biogasproduktion bedöms vara mycket stor och forskning för att ta fram nya substrat att använda inom biogasframställningen pågår. Ett möjligt substrat är alger, dock har tidigare forskning påvisat höga kadmiumhalter i alger vilket kan innebära problem för spridning av rötresten.

This study was carried out at the request of the Swedish forest company Sveaskog which is an important producer of logging residues (branches and tops) intended for energy production. The company wanted to increase the average dry content to 60 percent in their delivered logging residues. At the time when this study was initiated, the dry content in the chipped logging residues originating from the Bergslagen district was at 52 percent. The aim of the study was to find out how windrows of logging residues could be arranged in order to help obtain desired properties such as increased dry content. Sveaskog had developed a system for evaluation of windrows and a standardized form was utilized to describe different properties of the windrows.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.